3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMIC4682YM
Microchip Tech · DC-DC Converters · SOIC-8
MIC4682YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input that senses the output voltage; connect to the 1.23V tap of the output voltage-divider network. |
| 2 | GND | power_in | Ground return, tied internally to pins 6 and 7 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane. |
| 3 | ISET | input | Current limit set input; connect an external resistor to ground to set the current limit (400mA to 2A), and do not ground or float this pin. |
| 4 | SHDN | input | Shutdown input; logic low (<0.8V) enables the regulator and logic high (>2V) shuts it down. |
| 5 | IN | power_in | Unregulated supply voltage input, +4V to +34V. |
| 6 | GND | power_in | Ground return, tied internally to pins 2 and 7 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane. |
| 7 | GND | power_in | Ground return, tied internally to pins 2 and 6 and the die-attach paddle, which also acts as the heat-sinking path to the PCB ground plane. |
| 8 | SW | output | Switch output, the internal power emitter of the NPN output switch. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 4 | 34 | V | Note 4 | 3 | |
| Quiescent Current | IIN | 7 | 12 | mA | VFB = 1.5V | 3 | |
| Quiescent Current (regulator off) | IIN | 35 | 100 | µA | VSHDN = 5V (Regulator off) | 3 | |
| Standby Quiescent Current | IIN | 1 | µA | VSHDN = VIN | 3 | ||
| Feedback Voltage (±1%) | VFB | 1.217 | 1.23 | 1.243 | V | (±1%) | 3 |
| Feedback Voltage (±2%, over temp) | VFB | 1.205 | 1.255 | V | (±2%) | 3 | |
| Feedback Voltage | VFB | 1.193 | 1.23 | 1.267 | V | 8V ≤ VIN ≤ 34V, 0.1A ≤ ILOAD ≤ 0.8A | 3 |
| Feedback Voltage (over temp) | VFB | 1.18 | 1.28 | V | 8V ≤ VIN ≤ 34V, 0.1A ≤ ILOAD ≤ 0.8A | 3 | |
| Current Limit Accuracy | ILIM | 0.9 | 1 | 1.1 | A | See Test Circuit, VOUT = 3.6V | 3 |
| Oscillator Frequency | fSW | 180 | 200 | 220 | kHz | 3 | |
| Maximum Duty Cycle | DMAX | 93 | 95 | % | VFB = 1.0V | 3 | |
| Switch Saturation Voltage | VSW | 1.4 | 1.8 | V | IOUT = 1A | 3 | |
| Switch Leakage Current | ISW | 2 | 100 | µA | VIN = 34V, VSHDN = 5V, VSW = 0V | 3 | |
| Switch Leakage Current | ISW | 2 | 10 | mA | VIN = 34V, VSHDN = 5V, VSW = -1V | 3 | |
| Shutdown Input Logic Level, Regulator Off | VSHDN | 1.4 | 2 | V | Regulator Off | 3 | |
| Shutdown Input Logic Level, Regulator On | VSHDN | 1.25 | 0.8 | V | Regulator On | 3 | |
| Shutdown Input Current | ISHDN | -10 | -0.5 | 1 | µA | VSHDN = 5V (Regulator Off) | 3 |
| Thermal Shutdown | TJ | 160 | °C | 3 | |||
| Supply Voltage (absolute max) | VIN | 38 | V | Note 3, transients only | 3 | ||
| Shutdown Voltage | VSHDN | -0.3 | 38 | V | 3 | ||
| Steady-State Output Switch Voltage | VSW | -1 | V | 3 | |||
| Feedback Voltage (absolute max) | VFB | 12 | V | 3 | |||
| Current Limit Set Voltage | VISET | 1.23 | 7 | V | 3 | ||
| Ambient Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| ESD Rating | 2 | kV | Human body model, 1.5kΩ in series with 100pF | 3 | |||
| Supply Voltage (operating) | VIN | 4 | 34 | V | Notes 4, 7 | 3 | |
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 6. Measured on 1.5” square of 1oz. copper FR4 printed circuit board connected to the device ground leads. | 3 |
CAD (KiCad official)
- Symbol:
MIC4682YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4682ym-etched.step/mic4682ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4682ym.step/mic4682ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (15 pp, sha256
bb9934959c04a60e, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).