main
Ray
Publish 0.1.0
c44998c
MIC4605-2YM-T5
Microchip Tech · Gate Drive ICs · SOIC-8
MIC4605-2YM-T5 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Input supply for the gate drivers (5.5V to 16V operating range), to be decoupled to VSS with a >0.1 µF capacitor. |
| 2 | HB | power_in | High-side bootstrap supply; an external bootstrap capacitor is required across HB and HS, and an on-board bootstrap diode connects from VDD to HB. |
| 3 | HO | output | High-side drive output, connected to the gate of the external high-side power MOSFET. |
| 4 | HS | passive | High-side drive reference connection, connected to the source of the external high-side MOSFET and to the bottom of the bootstrap capacitor. |
| 5 | PWM | input | Single PWM input that drives both the high-side and low-side outputs out of phase. |
| 6 | NC | unconnected | No connect; this pin is not connected internally. |
| 7 | VSS | power_in | Driver reference supply input, generally connected to the power ground of the external circuitry. |
| 8 | LO | output | Low-side drive output, connected to the gate of the external low-side power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Quiescent Current | IDD | 100 | 250 | µA | LI = HI = 0V | 3 | |
| VDD Shutdown Current | IDDSH | 2.2 | 10 | µA | EN = 0V with HS = floating | 3 | |
| VDD Shutdown Current | IDDSH | 25 | 50 | µA | EN = 0V | 3 | |
| VDD Operating Current | IDDO | 170 | 500 | µA | f = 20 kHz | 3 | |
| Total HB Quiescent Current | IHB | 35 | 75 | µA | LI = HI = 0V or LI = 0V and HI = 5V | 3 | |
| Total HB Operating Current | IHBO | 50 | 400 | µA | f = 20 kHz | 3 | |
| HB to VSS Quiescent Current | IHBS | 0.05 | 5 | µA | VHS = VHB = 90V | 3 | |
| HB to VSS Operating Current | IHBSO | 30 | 300 | µA | f = 20 kHz | 3 | |
| Low-Level Input Voltage | VIL | 0.8 | V | 3 | |||
| High-Level Input Voltage | VIH | 2.2 | V | 3 | |||
| Input Pull-Down Resistance | RI | 50 | 130 | 250 | kΩ | PWM | 4 |
| VDD Falling Threshold | VDDF | 4 | 4.4 | 4.9 | V | 4 | |
| HB Falling Threshold | VHBF | 4 | 4.4 | 4.9 | V | 4 | |
| Bootstrap Low-Current Forward Voltage | VDL | 0.4 | 0.7 | V | IVDD-HB = 100 µA | 4 | |
| Bootstrap High-Current Forward Voltage | VDH | 0.7 | 1 | V | IVDD-HB = 50 mA | 4 | |
| Bootstrap Dynamic Resistance | RD | 2 | 5 | Ω | IVDD-HB = 50 mA | 4 | |
| LO Low-Level Output Voltage | VOLL | 0.3 | 0.6 | V | ILO = 50 mA | 4 | |
| LO High-Level Output Voltage | VOHL | 0.5 | 1 | V | ILO = -50 mA, VOHL = VDD, VLO | 4 | |
| HO Low-Level Output Voltage | VOLH | 0.3 | 0.6 | V | IHO = 50 mA | 4 | |
| HO High-Level Output Voltage | VOHH | 0.5 | 1 | V | IHO = -50 mA, VOHH = VHB, VHO | 4 | |
| Lower Turn-Off Propagation Delay | tLPHL | 35 | 75 | ns | LI Falling to LO Falling | 4 | |
| Upper Turn-Off Propagation Delay | tHPHL | 35 | 75 | ns | HI Falling to HO Falling | 4 | |
| Lower Turn-On Propagation Delay | tLPLH | 35 | 75 | ns | LI Rising to LO Rising | 4 | |
| Upper Turn-On Propagation Delay | tHPLH | 35 | 75 | ns | HI Rising to HO Rising | 4 | |
| Delay from PWM Going High to LO Going Low | tLOOFF | 35 | 75 | ns | 5 | ||
| Delay from LO Off to HO Going High | tHOON | 35 | 75 | ns | 5 | ||
| Delay from PWM Going Low to HO Going Low | tHOOFF | 35 | 75 | ns | 5 | ||
| Switch Node Voltage Threshold Signaling HO is Off | VSWTH | 1 | 2.2 | 4 | V | 5 | |
| Delay Between HO FET Considered Off to LO Turning On | tLOON | 35 | 75 | ns | 5 | ||
| Delay from PWM/HI Low to LO Going HI | tLOONHI | 80 | 150 | ns | For HS Low/LI High | 5 | |
| Force LO On if VSWTH is Not Detected | tSWTO | 100 | 250 | 500 | ns | 5 | |
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TS | -60 | 150 | °C | 5 | ||
| Supply Voltage | VDD, VHB, VHS | -0.3 | 18 | V | 3 | ||
| Input Voltages | VLI, VHI, VEN | -0.3 | V | max is VDD + 0.3V | 3 | ||
| Voltage on LO | VLO | -0.3 | V | max is VDD + 0.3V | 3 | ||
| Voltage on HS (Continuous) | -0.3 | 90 | V | 3 | |||
| Voltage on HB | 108 | V | 3 | ||||
| Average Current in VDD to HB Diode | 100 | mA | 3 | ||||
| ESD Rating HBM | 1 | kV | HBM | 3 | |||
| ESD Rating MM | 200 | V | MM | 3 | |||
| Supply Voltage (VDD) Decreasing | VDD | 5.25 | 16 | V | Decreasing VDD | 3 | |
| Supply Voltage (VDD) Increasing | VDD | 5.5 | 16 | V | Increasing VDD | 3 | |
| Voltage on HS | -0.3 | 85 | V | 3 | |||
| Voltage on HS (Repetitive Transient < 5 µs) | -2 | 90 | V | 3 | |||
| HS Slew Rate | 50 | V/ns | 3 | ||||
| Thermal Resistance 8-Lead SOIC | θJA | 99 | °C/W | 5 | |||
| Input Voltage Hysteresis | VHYS | 0.1 | V | 3 | |||
| VDD Threshold Hysteresis | VDDH | 0.25 | V | 4 | |||
| HB Threshold Hysteresis | VHBH | 0.25 | V | 4 | |||
| LO Peak Sink Current | IOHL | 1 | A | VLO = 0V (Note 3) | 4 | ||
| LO Peak Source Current | IOLL | 1 | A | VLO = 12V (Note 3) | 4 | ||
| HO Peak Sink Current | IOHH | 1 | A | VHO = 0V (Note 3) | 4 | ||
| HO Peak Source Current | IOLH | 1 | A | VHO = 12V (Note 3) | 4 | ||
| Output Rise/Fall Time | tRC/FC | 20 | ns | CL = 1000 pF | 4 | ||
| Minimum Input Pulse Width that Changes the Output | tPW | 50 | ns | Notes 2, 3 | 4 | ||
| LO Output Voltage Threshold for LO FET Off | VLOOFF | 1.9 | V | Note 3 | 5 |
CAD (KiCad official)
- Symbol:
MIC4605-2YM-T5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4605-2ym-t5-etched.step/mic4605-2ym-t5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4605-2ym-t5.step/mic4605-2ym-t5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
9d50d9f07993c95a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4605-2YM-T5
**Microchip Tech** · Gate Drive ICs · SOIC-8
MIC4605-2YM-T5 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Input supply for the gate drivers (5.5V to 16V operating range), to be decoupled to VSS with a >0.1 µF capacitor. |
| 2 | HB | power_in | High-side bootstrap supply; an external bootstrap capacitor is required across HB and HS, and an on-board bootstrap diode connects from VDD to HB. |
| 3 | HO | output | High-side drive output, connected to the gate of the external high-side power MOSFET. |
| 4 | HS | passive | High-side drive reference connection, connected to the source of the external high-side MOSFET and to the bottom of the bootstrap capacitor. |
| 5 | PWM | input | Single PWM input that drives both the high-side and low-side outputs out of phase. |
| 6 | NC | unconnected | No connect; this pin is not connected internally. |
| 7 | VSS | power_in | Driver reference supply input, generally connected to the power ground of the external circuitry. |
| 8 | LO | output | Low-side drive output, connected to the gate of the external low-side power MOSFET. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Quiescent Current | IDD | | 100 | 250 | µA | LI = HI = 0V | 3 |
| VDD Shutdown Current | IDDSH | | 2.2 | 10 | µA | EN = 0V with HS = floating | 3 |
| VDD Shutdown Current | IDDSH | | 25 | 50 | µA | EN = 0V | 3 |
| VDD Operating Current | IDDO | | 170 | 500 | µA | f = 20 kHz | 3 |
| Total HB Quiescent Current | IHB | | 35 | 75 | µA | LI = HI = 0V or LI = 0V and HI = 5V | 3 |
| Total HB Operating Current | IHBO | | 50 | 400 | µA | f = 20 kHz | 3 |
| HB to VSS Quiescent Current | IHBS | | 0.05 | 5 | µA | VHS = VHB = 90V | 3 |
| HB to VSS Operating Current | IHBSO | | 30 | 300 | µA | f = 20 kHz | 3 |
| Low-Level Input Voltage | VIL | | | 0.8 | V | | 3 |
| High-Level Input Voltage | VIH | 2.2 | | | V | | 3 |
| Input Pull-Down Resistance | RI | 50 | 130 | 250 | kΩ | PWM | 4 |
| VDD Falling Threshold | VDDF | 4 | 4.4 | 4.9 | V | | 4 |
| HB Falling Threshold | VHBF | 4 | 4.4 | 4.9 | V | | 4 |
| Bootstrap Low-Current Forward Voltage | VDL | | 0.4 | 0.7 | V | IVDD-HB = 100 µA | 4 |
| Bootstrap High-Current Forward Voltage | VDH | | 0.7 | 1 | V | IVDD-HB = 50 mA | 4 |
| Bootstrap Dynamic Resistance | RD | | 2 | 5 | Ω | IVDD-HB = 50 mA | 4 |
| LO Low-Level Output Voltage | VOLL | | 0.3 | 0.6 | V | ILO = 50 mA | 4 |
| LO High-Level Output Voltage | VOHL | | 0.5 | 1 | V | ILO = -50 mA, VOHL = VDD, VLO | 4 |
| HO Low-Level Output Voltage | VOLH | | 0.3 | 0.6 | V | IHO = 50 mA | 4 |
| HO High-Level Output Voltage | VOHH | | 0.5 | 1 | V | IHO = -50 mA, VOHH = VHB, VHO | 4 |
| Lower Turn-Off Propagation Delay | tLPHL | | 35 | 75 | ns | LI Falling to LO Falling | 4 |
| Upper Turn-Off Propagation Delay | tHPHL | | 35 | 75 | ns | HI Falling to HO Falling | 4 |
| Lower Turn-On Propagation Delay | tLPLH | | 35 | 75 | ns | LI Rising to LO Rising | 4 |
| Upper Turn-On Propagation Delay | tHPLH | | 35 | 75 | ns | HI Rising to HO Rising | 4 |
| Delay from PWM Going High to LO Going Low | tLOOFF | | 35 | 75 | ns | | 5 |
| Delay from LO Off to HO Going High | tHOON | | 35 | 75 | ns | | 5 |
| Delay from PWM Going Low to HO Going Low | tHOOFF | | 35 | 75 | ns | | 5 |
| Switch Node Voltage Threshold Signaling HO is Off | VSWTH | 1 | 2.2 | 4 | V | | 5 |
| Delay Between HO FET Considered Off to LO Turning On | tLOON | | 35 | 75 | ns | | 5 |
| Delay from PWM/HI Low to LO Going HI | tLOONHI | | 80 | 150 | ns | For HS Low/LI High | 5 |
| Force LO On if VSWTH is Not Detected | tSWTO | 100 | 250 | 500 | ns | | 5 |
| Junction Operating Temperature Range | TJ | -40 | | 125 | °C | | 5 |
| Storage Temperature Range | TS | -60 | | 150 | °C | | 5 |
| Supply Voltage | VDD, VHB, VHS | -0.3 | | 18 | V | | 3 |
| Input Voltages | VLI, VHI, VEN | -0.3 | | | V | max is VDD + 0.3V | 3 |
| Voltage on LO | VLO | -0.3 | | | V | max is VDD + 0.3V | 3 |
| Voltage on HS (Continuous) | | -0.3 | | 90 | V | | 3 |
| Voltage on HB | | | | 108 | V | | 3 |
| Average Current in VDD to HB Diode | | | | 100 | mA | | 3 |
| ESD Rating HBM | | | | 1 | kV | HBM | 3 |
| ESD Rating MM | | | | 200 | V | MM | 3 |
| Supply Voltage (VDD) Decreasing | VDD | 5.25 | | 16 | V | Decreasing VDD | 3 |
| Supply Voltage (VDD) Increasing | VDD | 5.5 | | 16 | V | Increasing VDD | 3 |
| Voltage on HS | | -0.3 | | 85 | V | | 3 |
| Voltage on HS (Repetitive Transient < 5 µs) | | -2 | | 90 | V | | 3 |
| HS Slew Rate | | | | 50 | V/ns | | 3 |
| Thermal Resistance 8-Lead SOIC | θJA | | 99 | | °C/W | | 5 |
| Input Voltage Hysteresis | VHYS | | 0.1 | | V | | 3 |
| VDD Threshold Hysteresis | VDDH | | 0.25 | | V | | 4 |
| HB Threshold Hysteresis | VHBH | | 0.25 | | V | | 4 |
| LO Peak Sink Current | IOHL | | 1 | | A | VLO = 0V (Note 3) | 4 |
| LO Peak Source Current | IOLL | | 1 | | A | VLO = 12V (Note 3) | 4 |
| HO Peak Sink Current | IOHH | | 1 | | A | VHO = 0V (Note 3) | 4 |
| HO Peak Source Current | IOLH | | 1 | | A | VHO = 12V (Note 3) | 4 |
| Output Rise/Fall Time | tRC/FC | | 20 | | ns | CL = 1000 pF | 4 |
| Minimum Input Pulse Width that Changes the Output | tPW | | 50 | | ns | Notes 2, 3 | 4 |
| LO Output Voltage Threshold for LO FET Off | VLOOFF | | 1.9 | | V | Note 3 | 5 |
## CAD (KiCad official)
- Symbol: `MIC4605-2YM-T5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mic4605-2ym-t5-etched.step` / `mic4605-2ym-t5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4605-2ym-t5.step` / `mic4605-2ym-t5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4605-2ym-t5-datasheet.pdf) (34 pp, sha256 `9d50d9f07993c95a`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4605-2ym-t5-datasheet.pdf)