main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic4605-2ym-t5: viewers · Ray
mic4605-2ym-t5-etched.glb Publish 0.1.0 · Ray
mic4605-2ym-t5-etched.step mic4605-2ym-t5: factory component page (tier=mfr) · Ray
mic4605-2ym-t5-hero.glb mic4605-2ym-t5: hero GLB from the etched model (keeps the MPN mark) · Ray
mic4605-2ym-t5-hero.overlay.json Publish 0.1.0 · Ray
mic4605-2ym-t5.glb Publish 0.1.0 · Ray
mic4605-2ym-t5.kicad_mod Publish 0.1.0 · Ray
mic4605-2ym-t5.kicad_sym Publish 0.1.0 · Ray
mic4605-2ym-t5.lbr Publish 0.1.0 · Ray
mic4605-2ym-t5.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MIC4605-2YM-T5

Microchip Tech · Gate Drive ICs · SOIC-8

MIC4605-2YM-T5 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Input supply for the gate drivers (5.5V to 16V operating range), to be decoupled to VSS with a >0.1 µF capacitor.
2 HB power_in High-side bootstrap supply; an external bootstrap capacitor is required across HB and HS, and an on-board bootstrap diode connects from VDD to HB.
3 HO output High-side drive output, connected to the gate of the external high-side power MOSFET.
4 HS passive High-side drive reference connection, connected to the source of the external high-side MOSFET and to the bottom of the bootstrap capacitor.
5 PWM input Single PWM input that drives both the high-side and low-side outputs out of phase.
6 NC unconnected No connect; this pin is not connected internally.
7 VSS power_in Driver reference supply input, generally connected to the power ground of the external circuitry.
8 LO output Low-side drive output, connected to the gate of the external low-side power MOSFET.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Quiescent Current IDD 100 250 µA LI = HI = 0V 3
VDD Shutdown Current IDDSH 2.2 10 µA EN = 0V with HS = floating 3
VDD Shutdown Current IDDSH 25 50 µA EN = 0V 3
VDD Operating Current IDDO 170 500 µA f = 20 kHz 3
Total HB Quiescent Current IHB 35 75 µA LI = HI = 0V or LI = 0V and HI = 5V 3
Total HB Operating Current IHBO 50 400 µA f = 20 kHz 3
HB to VSS Quiescent Current IHBS 0.05 5 µA VHS = VHB = 90V 3
HB to VSS Operating Current IHBSO 30 300 µA f = 20 kHz 3
Low-Level Input Voltage VIL 0.8 V 3
High-Level Input Voltage VIH 2.2 V 3
Input Pull-Down Resistance RI 50 130 250 kΩ PWM 4
VDD Falling Threshold VDDF 4 4.4 4.9 V 4
HB Falling Threshold VHBF 4 4.4 4.9 V 4
Bootstrap Low-Current Forward Voltage VDL 0.4 0.7 V IVDD-HB = 100 µA 4
Bootstrap High-Current Forward Voltage VDH 0.7 1 V IVDD-HB = 50 mA 4
Bootstrap Dynamic Resistance RD 2 5 Ω IVDD-HB = 50 mA 4
LO Low-Level Output Voltage VOLL 0.3 0.6 V ILO = 50 mA 4
LO High-Level Output Voltage VOHL 0.5 1 V ILO = -50 mA, VOHL = VDD, VLO 4
HO Low-Level Output Voltage VOLH 0.3 0.6 V IHO = 50 mA 4
HO High-Level Output Voltage VOHH 0.5 1 V IHO = -50 mA, VOHH = VHB, VHO 4
Lower Turn-Off Propagation Delay tLPHL 35 75 ns LI Falling to LO Falling 4
Upper Turn-Off Propagation Delay tHPHL 35 75 ns HI Falling to HO Falling 4
Lower Turn-On Propagation Delay tLPLH 35 75 ns LI Rising to LO Rising 4
Upper Turn-On Propagation Delay tHPLH 35 75 ns HI Rising to HO Rising 4
Delay from PWM Going High to LO Going Low tLOOFF 35 75 ns 5
Delay from LO Off to HO Going High tHOON 35 75 ns 5
Delay from PWM Going Low to HO Going Low tHOOFF 35 75 ns 5
Switch Node Voltage Threshold Signaling HO is Off VSWTH 1 2.2 4 V 5
Delay Between HO FET Considered Off to LO Turning On tLOON 35 75 ns 5
Delay from PWM/HI Low to LO Going HI tLOONHI 80 150 ns For HS Low/LI High 5
Force LO On if VSWTH is Not Detected tSWTO 100 250 500 ns 5
Junction Operating Temperature Range TJ -40 125 °C 5
Storage Temperature Range TS -60 150 °C 5
Supply Voltage VDD, VHB, VHS -0.3 18 V 3
Input Voltages VLI, VHI, VEN -0.3 V max is VDD + 0.3V 3
Voltage on LO VLO -0.3 V max is VDD + 0.3V 3
Voltage on HS (Continuous) -0.3 90 V 3
Voltage on HB 108 V 3
Average Current in VDD to HB Diode 100 mA 3
ESD Rating HBM 1 kV HBM 3
ESD Rating MM 200 V MM 3
Supply Voltage (VDD) Decreasing VDD 5.25 16 V Decreasing VDD 3
Supply Voltage (VDD) Increasing VDD 5.5 16 V Increasing VDD 3
Voltage on HS -0.3 85 V 3
Voltage on HS (Repetitive Transient < 5 µs) -2 90 V 3
HS Slew Rate 50 V/ns 3
Thermal Resistance 8-Lead SOIC θJA 99 °C/W 5
Input Voltage Hysteresis VHYS 0.1 V 3
VDD Threshold Hysteresis VDDH 0.25 V 4
HB Threshold Hysteresis VHBH 0.25 V 4
LO Peak Sink Current IOHL 1 A VLO = 0V (Note 3) 4
LO Peak Source Current IOLL 1 A VLO = 12V (Note 3) 4
HO Peak Sink Current IOHH 1 A VHO = 0V (Note 3) 4
HO Peak Source Current IOLH 1 A VHO = 12V (Note 3) 4
Output Rise/Fall Time tRC/FC 20 ns CL = 1000 pF 4
Minimum Input Pulse Width that Changes the Output tPW 50 ns Notes 2, 3 4
LO Output Voltage Threshold for LO FET Off VLOOFF 1.9 V Note 3 5

CAD (KiCad official)

  • Symbol: MIC4605-2YM-T5
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic4605-2ym-t5-etched.step / mic4605-2ym-t5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4605-2ym-t5.step / mic4605-2ym-t5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 9d50d9f07993c95a, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF