main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic4224ym-tr: viewers · Ray
mic4224ym-tr-etched.glb Publish 0.1.0 · Ray
mic4224ym-tr-etched.step mic4224ym-tr: factory component page (tier=lcsc) · Ray
mic4224ym-tr-hero.glb mic4224ym-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
mic4224ym-tr-hero.overlay.json Publish 0.1.0 · Ray
mic4224ym-tr.glb Publish 0.1.0 · Ray
mic4224ym-tr.kicad_mod Publish 0.1.0 · Ray
mic4224ym-tr.kicad_sym Publish 0.1.0 · Ray
mic4224ym-tr.lbr Publish 0.1.0 · Ray
mic4224ym-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

MIC4224YM-TR

Microchip Tech · Gate Drive ICs · SOIC-8

MIC4224YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable pin for output A, TTL/CMOS-compatible; logic high enables the device, internal pull-up enables the part if open, logic low forces output low regardless of input.
2 INA input Control Input A, TTL/CMOS-compatible logic input; connect to VDD or ground if not used and connect ENA to ground to disable driver A.
3 GND power_in Ground.
4 INB input Control Input B, TTL/CMOS-compatible logic input; connect to VDD or ground if not used and connect ENB to ground to disable driver B.
5 OUTB output Output B, parallel Bipolar/CMOS output.
6 VDD power_in Voltage supply input, +4.5V to +18V.
7 OUTA output Output A, parallel Bipolar/CMOS output.
8 ENB input Enable pin for output B, TTL/CMOS-compatible; logic high enables the device, internal pull-up enables the part if open, logic low forces output low regardless of input.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute max) VDD 20 V 3
Input Voltage lower limit VINA, VINB -5 V GND - 5V to VDD + 0.3V 3
Enable Voltage lower limit VENA, VENB -0.3 V to VDD + 0.3V 3
Junction Temperature (absolute) TJ -55 150 °C 3
Storage Temperature -65 150 °C 3
Lead Temperature 300 °C 10 sec. 3
ESD Rating HBM 2 kV HBM 3
ESD Rating MM 200 V MM 3
Supply Voltage (operating) VDD 4.5 18 V 3
Junction Temperature (operating) TJ -40 125 °C 3
Logic 1 Input Voltage VIH 2.4 2.2 V 4.5V ≤ VDD ≤ 18V 3
Logic 0 Input Voltage VIL 1.95 0.8 V 4.5V ≤ VDD ≤ 18V 3
Input Hysteresis 0.25 V 3
Input Current IIN -1 1 µA 0 ≤ VIN ≤ VDD, TA = 25°C 3
Input Current (full temp range) IIN -10 10 µA 0 ≤ VIN ≤ VDD, full operating junction temperature range 3
Input Current at negative input IIN -40 mA VIN = -5V 3
Low Output Voltage VOL 0.3 V IOUT = 10mA, VDD = 18V 3
Output Resistance, Source RO 30 45 Ω IOUT = -10mA, VDD = 18V 3
Output Resistance, Sink RO 16 30 Ω IOUT = 10mA, VDD = 18V 3
Peak Output Current IPK 3 A VDD = 8V (±3) 3
Peak Output Current IPK 4 A VDD = 12V (±4) 3
Latch-Up Protection Withstand reverse current I 500 mA >500 mA 3
Rise Time tR 15 40 ns Test Figure 1; CL = 2000pF 3
Fall Time tF 15 40 ns Test Figure 1; CL = 2000pF 3
Delay Time tD1 25 45 ns Test Figure 1; CL = 2000pF 3
Delay Time tD2 35 50 ns Test Figure 1; CL = 2000pF 3
High Level Enable Voltage VEN_H 2.4 1.9 V LO to HI transition 3
Low Level Enable Voltage VEN_L 1.55 0.8 V HI to LO transition 3
Enable Hysteresis 0.35 V 3
Enable Impedance REN 100 kΩ VDD = 18V, VENA = VENB = GND 3
Enable Propagation Delay Time tD3 20 60 ns CL = 2000pF 3
Enable Propagation Delay Time tD4 45 150 ns CL = 2000pF 3
Power Supply Current (inputs high) ISH 1.7 2.5 mA VINA = VINB = 3.0V, VENA = VENB = open 3
Power Supply Current (inputs low) ISL 0.7 1.5 mA VINA = VINB = 0.0V, VENA = VENB = open 3

CAD (KiCad official)

  • Symbol: MIC4224YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic4224ym-tr-etched.step / mic4224ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4224ym-tr.step / mic4224ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 7d64c30cb5fc69b8, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF