3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC4224YM-TR
Microchip Tech · Gate Drive ICs · SOIC-8
MIC4224YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable pin for output A, TTL/CMOS-compatible; logic high enables the device, internal pull-up enables the part if open, logic low forces output low regardless of input. |
| 2 | INA | input | Control Input A, TTL/CMOS-compatible logic input; connect to VDD or ground if not used and connect ENA to ground to disable driver A. |
| 3 | GND | power_in | Ground. |
| 4 | INB | input | Control Input B, TTL/CMOS-compatible logic input; connect to VDD or ground if not used and connect ENB to ground to disable driver B. |
| 5 | OUTB | output | Output B, parallel Bipolar/CMOS output. |
| 6 | VDD | power_in | Voltage supply input, +4.5V to +18V. |
| 7 | OUTA | output | Output A, parallel Bipolar/CMOS output. |
| 8 | ENB | input | Enable pin for output B, TTL/CMOS-compatible; logic high enables the device, internal pull-up enables the part if open, logic low forces output low regardless of input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (absolute max) | VDD | 20 | V | 3 | |||
| Input Voltage lower limit | VINA, VINB | -5 | V | GND - 5V to VDD + 0.3V | 3 | ||
| Enable Voltage lower limit | VENA, VENB | -0.3 | V | to VDD + 0.3V | 3 | ||
| Junction Temperature (absolute) | TJ | -55 | 150 | °C | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature | 300 | °C | 10 sec. | 3 | |||
| ESD Rating HBM | 2 | kV | HBM | 3 | |||
| ESD Rating MM | 200 | V | MM | 3 | |||
| Supply Voltage (operating) | VDD | 4.5 | 18 | V | 3 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 3 | ||
| Logic 1 Input Voltage | VIH | 2.4 | 2.2 | V | 4.5V ≤ VDD ≤ 18V | 3 | |
| Logic 0 Input Voltage | VIL | 1.95 | 0.8 | V | 4.5V ≤ VDD ≤ 18V | 3 | |
| Input Hysteresis | 0.25 | V | 3 | ||||
| Input Current | IIN | -1 | 1 | µA | 0 ≤ VIN ≤ VDD, TA = 25°C | 3 | |
| Input Current (full temp range) | IIN | -10 | 10 | µA | 0 ≤ VIN ≤ VDD, full operating junction temperature range | 3 | |
| Input Current at negative input | IIN | -40 | mA | VIN = -5V | 3 | ||
| Low Output Voltage | VOL | 0.3 | V | IOUT = 10mA, VDD = 18V | 3 | ||
| Output Resistance, Source | RO | 30 | 45 | Ω | IOUT = -10mA, VDD = 18V | 3 | |
| Output Resistance, Sink | RO | 16 | 30 | Ω | IOUT = 10mA, VDD = 18V | 3 | |
| Peak Output Current | IPK | 3 | A | VDD = 8V (±3) | 3 | ||
| Peak Output Current | IPK | 4 | A | VDD = 12V (±4) | 3 | ||
| Latch-Up Protection Withstand reverse current | I | 500 | mA | >500 mA | 3 | ||
| Rise Time | tR | 15 | 40 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Fall Time | tF | 15 | 40 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Delay Time | tD1 | 25 | 45 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Delay Time | tD2 | 35 | 50 | ns | Test Figure 1; CL = 2000pF | 3 | |
| High Level Enable Voltage | VEN_H | 2.4 | 1.9 | V | LO to HI transition | 3 | |
| Low Level Enable Voltage | VEN_L | 1.55 | 0.8 | V | HI to LO transition | 3 | |
| Enable Hysteresis | 0.35 | V | 3 | ||||
| Enable Impedance | REN | 100 | kΩ | VDD = 18V, VENA = VENB = GND | 3 | ||
| Enable Propagation Delay Time | tD3 | 20 | 60 | ns | CL = 2000pF | 3 | |
| Enable Propagation Delay Time | tD4 | 45 | 150 | ns | CL = 2000pF | 3 | |
| Power Supply Current (inputs high) | ISH | 1.7 | 2.5 | mA | VINA = VINB = 3.0V, VENA = VENB = open | 3 | |
| Power Supply Current (inputs low) | ISL | 0.7 | 1.5 | mA | VINA = VINB = 0.0V, VENA = VENB = open | 3 |
CAD (KiCad official)
- Symbol:
MIC4224YM-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4224ym-tr-etched.step/mic4224ym-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4224ym-tr.step/mic4224ym-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
7d64c30cb5fc69b8, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).