main
Ray
Publish 0.1.0
6d7086c
MIC4128YMME
Microchip Tech · Gate Drive ICs · MSOP-8
MIC4128YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected; the datasheet lists this pin as NC in the pin function table. |
| 2 | INA | input | Control Input A is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current. |
| 3 | GND | power_in | Ground pin, which should use an individual return or ground plane for optimum switching speed when driving inverting outputs. |
| 4 | INB | input | Control Input B is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current. |
| 5 | OUTB | output | Output B is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground. |
| 6 | VS | power_in | Supply input with an operating range of +4.5V to +20V, to be bypassed with a 1.0µF film capacitor in parallel with one or two 0.1µF ceramic MLC capacitors. |
| 7 | OUTA | output | Output A is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground. |
| 8 | NC | unconnected | Not internally connected; the datasheet lists this pin as NC in the pin function table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VS) | VS | 4.5 | 20 | V | 3 | ||
| Supply Voltage | 24 | V | 3 | ||||
| Input Voltage | -5 | V | Referenced to GND; upper limit printed as VS + 0.3V | 3 | |||
| Logic 1 Input Voltage | VIH | 2.4 | 1.4 | V | 3 | ||
| Logic 1 Input Voltage | VIH | 2.4 | 1.6 | V | 3 | ||
| Logic 0 Input Voltage | VIL | 1.1 | 0.8 | V | 3 | ||
| Logic 0 Input Voltage | VIL | 1.3 | 0.8 | V | 3 | ||
| Input Current | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VS | 3 | |
| Low Output Voltage | VOL | 0.025 | V | 3 | |||
| Output Resistance | RO | 6 | 10 | Ω | 3 | ||
| Output Resistance | RO | 8 | 12 | Ω | IOUT = 10 mA, VS = 20V | 3 | |
| Latch-Up Protection Withstand Reverse Current | I | 200 | mA | Withstand Reverse Current | 3 | ||
| Rise Time | tR | 13 | 30 | ns | Test Figure 1-1 | 3 | |
| Rise Time | tR | 20 | 40 | ns | Test Figure 1-1 | 3 | |
| Fall Time | tF | 15 | 25 | ns | Test Figure 1-1 | 3 | |
| Fall Time | tF | 18 | 40 | ns | Test Figure 1-1 | 3 | |
| Delay Time | tD1 | 37 | 50 | ns | Test Figure 1-1 | 3 | |
| Delay Time | tD1 | 43 | 60 | ns | Test Figure 1-1 | 3 | |
| Delay Time | tD2 | 40 | 60 | ns | Test Figure 1-1 | 3 | |
| Delay Time | tD2 | 45 | 70 | ns | Test Figure 1-1 | 3 | |
| Power Supply Current | IS | 1.4 | 4.5 | mA | VINA = VINB 3.0V | 4 | |
| Power Supply Current | IS | 1.5 | 8 | mA | 4 | ||
| Power Supply Current | IS | 0.18 | 0.4 | mA | VINA = VINB 0.0V | 4 | |
| Power Supply Current | IS | 0.19 | 0.6 | mA | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Lead Temperature | 300 | °C | 10 sec. | 5 | |||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Thermal Resistance, EP MSOP 8-Ld | JA | 60 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC4128YMME - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic4128ymme-etched.step/mic4128ymme-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4128ymme.step/mic4128ymme.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
d0c04b72c49670cc, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4128YMME
**Microchip Tech** · Gate Drive ICs · MSOP-8
MIC4128YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected; the datasheet lists this pin as NC in the pin function table. |
| 2 | INA | input | Control Input A is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current. |
| 3 | GND | power_in | Ground pin, which should use an individual return or ground plane for optimum switching speed when driving inverting outputs. |
| 4 | INB | input | Control Input B is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current. |
| 5 | OUTB | output | Output B is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground. |
| 6 | VS | power_in | Supply input with an operating range of +4.5V to +20V, to be bypassed with a 1.0µF film capacitor in parallel with one or two 0.1µF ceramic MLC capacitors. |
| 7 | OUTA | output | Output A is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground. |
| 8 | NC | unconnected | Not internally connected; the datasheet lists this pin as NC in the pin function table. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VS) | VS | 4.5 | | 20 | V | | 3 |
| Supply Voltage | | | | 24 | V | | 3 |
| Input Voltage | | -5 | | | V | Referenced to GND; upper limit printed as VS + 0.3V | 3 |
| Logic 1 Input Voltage | VIH | 2.4 | 1.4 | | V | | 3 |
| Logic 1 Input Voltage | VIH | 2.4 | 1.6 | | V | | 3 |
| Logic 0 Input Voltage | VIL | | 1.1 | 0.8 | V | | 3 |
| Logic 0 Input Voltage | VIL | | 1.3 | 0.8 | V | | 3 |
| Input Current | IIN | -1 | | 1 | µA | 0V ≤ VIN ≤ VS | 3 |
| Low Output Voltage | VOL | | | 0.025 | V | | 3 |
| Output Resistance | RO | | 6 | 10 | Ω | | 3 |
| Output Resistance | RO | | 8 | 12 | Ω | IOUT = 10 mA, VS = 20V | 3 |
| Latch-Up Protection Withstand Reverse Current | I | 200 | | | mA | Withstand Reverse Current | 3 |
| Rise Time | tR | | 13 | 30 | ns | Test Figure 1-1 | 3 |
| Rise Time | tR | | 20 | 40 | ns | Test Figure 1-1 | 3 |
| Fall Time | tF | | 15 | 25 | ns | Test Figure 1-1 | 3 |
| Fall Time | tF | | 18 | 40 | ns | Test Figure 1-1 | 3 |
| Delay Time | tD1 | | 37 | 50 | ns | Test Figure 1-1 | 3 |
| Delay Time | tD1 | | 43 | 60 | ns | Test Figure 1-1 | 3 |
| Delay Time | tD2 | | 40 | 60 | ns | Test Figure 1-1 | 3 |
| Delay Time | tD2 | | 45 | 70 | ns | Test Figure 1-1 | 3 |
| Power Supply Current | IS | | 1.4 | 4.5 | mA | VINA = VINB 3.0V | 4 |
| Power Supply Current | IS | | 1.5 | 8 | mA | | 4 |
| Power Supply Current | IS | | 0.18 | 0.4 | mA | VINA = VINB 0.0V | 4 |
| Power Supply Current | IS | | 0.19 | 0.6 | mA | | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 5 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 5 |
| Lead Temperature | | | | 300 | °C | 10 sec. | 5 |
| Junction Operating Temperature Range | TJ | -40 | | 125 | °C | | 5 |
| Thermal Resistance, EP MSOP 8-Ld | JA | | 60 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `MIC4128YMME`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic4128ymme-etched.step` / `mic4128ymme-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4128ymme.step` / `mic4128ymme.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4128ymme-datasheet.pdf) (22 pp, sha256 `d0c04b72c49670cc`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4128ymme-datasheet.pdf)