main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic4128ymme: viewers · Ray
mic4128ymme-etched.glb Publish 0.1.0 · Ray
mic4128ymme-etched.step mic4128ymme: factory component page (tier=mfr) · Ray
mic4128ymme-hero.glb mic4128ymme: hero GLB from the etched model (keeps the MPN mark) · Ray
mic4128ymme-hero.overlay.json Publish 0.1.0 · Ray
mic4128ymme.glb Publish 0.1.0 · Ray
mic4128ymme.kicad_mod Publish 0.1.0 · Ray
mic4128ymme.kicad_sym Publish 0.1.0 · Ray
mic4128ymme.lbr Publish 0.1.0 · Ray
mic4128ymme.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MIC4128YMME

Microchip Tech · Gate Drive ICs · MSOP-8

MIC4128YMME from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not internally connected; the datasheet lists this pin as NC in the pin function table.
2 INA input Control Input A is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current.
3 GND power_in Ground pin, which should use an individual return or ground plane for optimum switching speed when driving inverting outputs.
4 INB input Control Input B is a TTL/CMOS compatible logic input with an approximate 1.5V threshold that recognizes up to VS as logic high and draws less than 1µA in that range, and unused inputs should be tied to ground for the lowest quiescent current.
5 OUTB output Output B is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground.
6 VS power_in Supply input with an operating range of +4.5V to +20V, to be bypassed with a 1.0µF film capacitor in parallel with one or two 0.1µF ceramic MLC capacitors.
7 OUTA output Output A is a CMOS totem-pole output rated for 1.5A peak output current, swinging within 25mV of VS or ground.
8 NC unconnected Not internally connected; the datasheet lists this pin as NC in the pin function table.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VS) VS 4.5 20 V 3
Supply Voltage 24 V 3
Input Voltage -5 V Referenced to GND; upper limit printed as VS + 0.3V 3
Logic 1 Input Voltage VIH 2.4 1.4 V 3
Logic 1 Input Voltage VIH 2.4 1.6 V 3
Logic 0 Input Voltage VIL 1.1 0.8 V 3
Logic 0 Input Voltage VIL 1.3 0.8 V 3
Input Current IIN -1 1 µA 0V ≤ VIN ≤ VS 3
Low Output Voltage VOL 0.025 V 3
Output Resistance RO 6 10 Ω 3
Output Resistance RO 8 12 Ω IOUT = 10 mA, VS = 20V 3
Latch-Up Protection Withstand Reverse Current I 200 mA Withstand Reverse Current 3
Rise Time tR 13 30 ns Test Figure 1-1 3
Rise Time tR 20 40 ns Test Figure 1-1 3
Fall Time tF 15 25 ns Test Figure 1-1 3
Fall Time tF 18 40 ns Test Figure 1-1 3
Delay Time tD1 37 50 ns Test Figure 1-1 3
Delay Time tD1 43 60 ns Test Figure 1-1 3
Delay Time tD2 40 60 ns Test Figure 1-1 3
Delay Time tD2 45 70 ns Test Figure 1-1 3
Power Supply Current IS 1.4 4.5 mA VINA = VINB 3.0V 4
Power Supply Current IS 1.5 8 mA 4
Power Supply Current IS 0.18 0.4 mA VINA = VINB 0.0V 4
Power Supply Current IS 0.19 0.6 mA 4
Maximum Junction Temperature TJ 150 °C 5
Storage Temperature Range TS -65 150 °C 5
Lead Temperature 300 °C 10 sec. 5
Junction Operating Temperature Range TJ -40 125 °C 5
Thermal Resistance, EP MSOP 8-Ld JA 60 °C/W 5

CAD (KiCad official)

  • Symbol: MIC4128YMME
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic4128ymme-etched.step / mic4128ymme-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4128ymme.step / mic4128ymme.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 d0c04b72c49670cc, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF