main
Ray
Publish 0.1.0
3181509
MIC4102YM-TR
Microchip Tech · Gate Drive ICs · SOIC-8
MIC4102YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply to the lower gate drivers; decouple this pin to VSS (pin 7), and the on-chip bootstrap diode connects VDD to HB (pin 2). |
| 2 | HB | power_in | High-side bootstrap supply; an external bootstrap capacitor is required, with its positive side connected to this pin, and the bootstrap diode is on-chip. |
| 3 | HO | output | High-side output that connects to the gate of the high-side power MOSFET. |
| 4 | HS | power_in | High-side source connection that connects to the source of the high-side power MOSFET and to the negative side of the bootstrap capacitor. |
| 5 | PWM | input | Control input where a PWM high drives HO high and LO low, and a PWM low drives HO low and LO high. |
| 6 | LS | input | Low-side disable which, when pulled low, immediately terminates LO drive and keeps LO low until the signal is removed, without affecting HS drive. |
| 7 | VSS | power_in | Chip negative supply, generally grounded. |
| 8 | LO | output | Low-side output that connects to the gate of the low-side power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDD, VHB, VHS) | VDD, VHB, VHS | -0.3 | 18 | V | 3 | ||
| Input Voltages (VPWM, VLS) | VPWM, VLS | -0.3 | V | max printed as VDD + 0.3V | 3 | ||
| Voltage on LO (VLO) | VLO | -0.3 | V | max printed as VDD + 0.3V | 3 | ||
| Voltage on HS (Continuous) | VHS | -1 | 110 | V | 3 | ||
| Voltage on HB | VHB | 118 | V | 3 | |||
| Average Current in VDD to HB Diode | 100 | mA | 3 | ||||
| Supply Voltage (VDD) | VDD | 9 | 16 | V | 3 | ||
| Voltage on HS | VHS | -1 | 100 | V | 3 | ||
| Voltage on HS (Repetitive Transient) | VHS | -5 | 105 | V | 3 | ||
| HS Slew Rate | 50 | V/ns | 3 | ||||
| VDD Quiescent Current | IDD | 150 | 450 | µA | PWM = 0V | 4 | |
| VDD Quiescent Current (bold) | IDD | 600 | µA | PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| VDD Operating Current | IDDO | 3 | 3.5 | mA | f = 500 kHz | 4 | |
| VDD Operating Current (bold) | IDDO | 4 | mA | f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Total HB Quiescent Current | IHB | 25 | 150 | µA | PWM = 0V | 4 | |
| Total HB Quiescent Current (bold) | IHB | 200 | µA | PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Total HB Operating Current | IHBO | 1.5 | 2.5 | mA | f = 500 kHz | 4 | |
| Total HB Operating Current (bold) | IHBO | 3 | mA | f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| HB to VSS Quiescent Current | IHBS | 0.05 | 1 | µA | VHS = VHB = 110V | 4 | |
| HB to VSS Quiescent Current (bold) | IHBS | 30 | µA | VHS = VHB = 110V; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Low Level Input Voltage Threshold | VIL | 0.8 | 1.5 | V | 4 | ||
| High Level Input Voltage Threshold | VIH | 1.5 | 2.2 | V | 4 | ||
| Input Pull-Down Resistance | RI | 100 | 200 | 500 | kΩ | 4 | |
| VDD Rising Threshold | VDDR | 6.5 | 7.3 | 8 | V | 4 | |
| HB Rising Threshold | VHBR | 6 | 7 | 8 | V | 4 | |
| Low-Current Forward Voltage | VDL | 0.4 | 0.55 | V | VIVDD-HB = 100 µA | 4 | |
| Low-Current Forward Voltage (bold) | VDL | 0.7 | V | VIVDD-HB = 100 µA; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| High-Current Forward Voltage | VDH | 0.7 | 0.8 | V | VIVDD-HB = 100 mA | 4 | |
| High-Current Forward Voltage (bold) | VDH | 1 | V | VIVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Dynamic Resistance | RD | 1 | 1.5 | Ω | IVDD-HB = 100 mA | 4 | |
| Dynamic Resistance (bold) | RD | 2 | Ω | IVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Low Level Output Voltage (LO gate driver) | VOLL | 0.18 | 0.3 | V | VILO = 160 mA | 4 | |
| Low Level Output Voltage (LO gate driver) (bold) | VOLL | 0.4 | V | VILO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| High Level Output Voltage (LO gate driver) | VOHL | 0.25 | 0.3 | V | ILO = -100 mA, VOHL = VDD, VLO | 4 | |
| High Level Output Voltage (LO gate driver) (bold) | VOHL | 0.45 | V | ILO = -100 mA, VOHL = VDD, VLO; bold: -40°C ≤ TJ ≤ +125°C | 4 | ||
| Low Level Output Voltage (HO gate driver) | VOLH | 0.22 | 0.3 | V | VIHO = 160 mA | 5 | |
| Low Level Output Voltage (HO gate driver) (bold) | VOLH | 0.4 | V | VIHO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| High Level Output Voltage (HO gate driver) | VOHH | 0.25 | 0.3 | V | IHO = -100 mA, VOHH = VHB, VHO | 5 | |
| High Level Output Voltage (HO gate driver) (bold) | VOHH | 0.45 | V | IHO = -100 mA, VOHH = VHB, VHO; bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Delay between PWM going high to LO going low | tLOOFF | 30 | 45 | ns | 5 | ||
| Delay between PWM going high to LO going low (bold) | tLOOFF | 60 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Delay between LO OFF to HO going High | tHOON | 30 | 50 | ns | 5 | ||
| Delay between LO OFF to HO going High (bold) | tHOON | 60 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Delay between PWM going Low to HO going low | tHOOFF | 45 | 65 | ns | 5 | ||
| Delay between PWM going Low to HO going low (bold) | tHOOFF | 70 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Switch Node Voltage Threshold when HO turns off | VSWth | 1 | 2.5 | 4 | V | 5 | |
| Delay between HO MOSFET being considered off to LO turning ON | tLOON | 30 | 60 | ns | 5 | ||
| Delay between HO MOSFET being considered off to LO turning ON (bold) | tLOON | 70 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Delay between LS going low and LO turning OFF | tLSOFF | 36 | 45 | ns | CL = 1000 pF | 5 | |
| Delay between LS going low and LO turning OFF (bold) | tLSOFF | 70 | ns | CL = 1000 pF; bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Forced LO ON, if VLOTH is not detected | tSWTO | 120 | 250 | 450 | ns | 5 | |
| Either Output Rise Time (3V to 9V) | tR | 0.33 | 0.6 | µs | CL = 0.1 µF | 5 | |
| Either Output Rise Time (3V to 9V) (bold) | tR | 0.8 | µs | CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Either Output Fall Time (3V to 9V) | tF | 0.2 | 0.3 | µs | CL = 0.1 µF | 5 | |
| Either Output Fall Time (3V to 9V) (bold) | tF | 0.4 | µs | CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C | 5 | ||
| Minimum Input Pulse Width that changes the output with LS = 5V | tPW | 40 | 60 | ns | CL = 0, Note 3 | 5 | |
| Minimum Input Pulse Width that changes the output with LS = 0V | tPW | 13 | 20 | ns | CL = 0, Note 3 | 6 | |
| Max. Junction Temperature Range | TJ | -55 | 150 | °C | Note 1 | 7 | |
| Storage Temperature Range | TS | -60 | 150 | °C | 7 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 7 |
CAD (KiCad official)
- Symbol:
MIC4102YM-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4102ym-tr-etched.step/mic4102ym-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4102ym-tr.step/mic4102ym-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
eec1b5080fb32c26, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4102YM-TR
**Microchip Tech** · Gate Drive ICs · SOIC-8
MIC4102YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply to the lower gate drivers; decouple this pin to VSS (pin 7), and the on-chip bootstrap diode connects VDD to HB (pin 2). |
| 2 | HB | power_in | High-side bootstrap supply; an external bootstrap capacitor is required, with its positive side connected to this pin, and the bootstrap diode is on-chip. |
| 3 | HO | output | High-side output that connects to the gate of the high-side power MOSFET. |
| 4 | HS | power_in | High-side source connection that connects to the source of the high-side power MOSFET and to the negative side of the bootstrap capacitor. |
| 5 | PWM | input | Control input where a PWM high drives HO high and LO low, and a PWM low drives HO low and LO high. |
| 6 | LS | input | Low-side disable which, when pulled low, immediately terminates LO drive and keeps LO low until the signal is removed, without affecting HS drive. |
| 7 | VSS | power_in | Chip negative supply, generally grounded. |
| 8 | LO | output | Low-side output that connects to the gate of the low-side power MOSFET. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDD, VHB, VHS) | VDD, VHB, VHS | -0.3 | | 18 | V | | 3 |
| Input Voltages (VPWM, VLS) | VPWM, VLS | -0.3 | | | V | max printed as VDD + 0.3V | 3 |
| Voltage on LO (VLO) | VLO | -0.3 | | | V | max printed as VDD + 0.3V | 3 |
| Voltage on HS (Continuous) | VHS | -1 | | 110 | V | | 3 |
| Voltage on HB | VHB | | | 118 | V | | 3 |
| Average Current in VDD to HB Diode | | | | 100 | mA | | 3 |
| Supply Voltage (VDD) | VDD | 9 | | 16 | V | | 3 |
| Voltage on HS | VHS | -1 | | 100 | V | | 3 |
| Voltage on HS (Repetitive Transient) | VHS | -5 | | 105 | V | | 3 |
| HS Slew Rate | | | | 50 | V/ns | | 3 |
| VDD Quiescent Current | IDD | | 150 | 450 | µA | PWM = 0V | 4 |
| VDD Quiescent Current (bold) | IDD | | | 600 | µA | PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| VDD Operating Current | IDDO | | 3 | 3.5 | mA | f = 500 kHz | 4 |
| VDD Operating Current (bold) | IDDO | | | 4 | mA | f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Total HB Quiescent Current | IHB | | 25 | 150 | µA | PWM = 0V | 4 |
| Total HB Quiescent Current (bold) | IHB | | | 200 | µA | PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Total HB Operating Current | IHBO | | 1.5 | 2.5 | mA | f = 500 kHz | 4 |
| Total HB Operating Current (bold) | IHBO | | | 3 | mA | f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| HB to VSS Quiescent Current | IHBS | | 0.05 | 1 | µA | VHS = VHB = 110V | 4 |
| HB to VSS Quiescent Current (bold) | IHBS | | | 30 | µA | VHS = VHB = 110V; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Low Level Input Voltage Threshold | VIL | 0.8 | 1.5 | | V | | 4 |
| High Level Input Voltage Threshold | VIH | | 1.5 | 2.2 | V | | 4 |
| Input Pull-Down Resistance | RI | 100 | 200 | 500 | kΩ | | 4 |
| VDD Rising Threshold | VDDR | 6.5 | 7.3 | 8 | V | | 4 |
| HB Rising Threshold | VHBR | 6 | 7 | 8 | V | | 4 |
| Low-Current Forward Voltage | VDL | | 0.4 | 0.55 | V | VIVDD-HB = 100 µA | 4 |
| Low-Current Forward Voltage (bold) | VDL | | | 0.7 | V | VIVDD-HB = 100 µA; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| High-Current Forward Voltage | VDH | | 0.7 | 0.8 | V | VIVDD-HB = 100 mA | 4 |
| High-Current Forward Voltage (bold) | VDH | | | 1 | V | VIVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Dynamic Resistance | RD | | 1 | 1.5 | Ω | IVDD-HB = 100 mA | 4 |
| Dynamic Resistance (bold) | RD | | | 2 | Ω | IVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Low Level Output Voltage (LO gate driver) | VOLL | | 0.18 | 0.3 | V | VILO = 160 mA | 4 |
| Low Level Output Voltage (LO gate driver) (bold) | VOLL | | | 0.4 | V | VILO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| High Level Output Voltage (LO gate driver) | VOHL | | 0.25 | 0.3 | V | ILO = -100 mA, VOHL = VDD, VLO | 4 |
| High Level Output Voltage (LO gate driver) (bold) | VOHL | | | 0.45 | V | ILO = -100 mA, VOHL = VDD, VLO; bold: -40°C ≤ TJ ≤ +125°C | 4 |
| Low Level Output Voltage (HO gate driver) | VOLH | | 0.22 | 0.3 | V | VIHO = 160 mA | 5 |
| Low Level Output Voltage (HO gate driver) (bold) | VOLH | | | 0.4 | V | VIHO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C | 5 |
| High Level Output Voltage (HO gate driver) | VOHH | | 0.25 | 0.3 | V | IHO = -100 mA, VOHH = VHB, VHO | 5 |
| High Level Output Voltage (HO gate driver) (bold) | VOHH | | | 0.45 | V | IHO = -100 mA, VOHH = VHB, VHO; bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Delay between PWM going high to LO going low | tLOOFF | | 30 | 45 | ns | | 5 |
| Delay between PWM going high to LO going low (bold) | tLOOFF | | | 60 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Delay between LO OFF to HO going High | tHOON | | 30 | 50 | ns | | 5 |
| Delay between LO OFF to HO going High (bold) | tHOON | | | 60 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Delay between PWM going Low to HO going low | tHOOFF | | 45 | 65 | ns | | 5 |
| Delay between PWM going Low to HO going low (bold) | tHOOFF | | | 70 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Switch Node Voltage Threshold when HO turns off | VSWth | 1 | 2.5 | 4 | V | | 5 |
| Delay between HO MOSFET being considered off to LO turning ON | tLOON | | 30 | 60 | ns | | 5 |
| Delay between HO MOSFET being considered off to LO turning ON (bold) | tLOON | | | 70 | ns | bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Delay between LS going low and LO turning OFF | tLSOFF | | 36 | 45 | ns | CL = 1000 pF | 5 |
| Delay between LS going low and LO turning OFF (bold) | tLSOFF | | | 70 | ns | CL = 1000 pF; bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Forced LO ON, if VLOTH is not detected | tSWTO | 120 | 250 | 450 | ns | | 5 |
| Either Output Rise Time (3V to 9V) | tR | | 0.33 | 0.6 | µs | CL = 0.1 µF | 5 |
| Either Output Rise Time (3V to 9V) (bold) | tR | | | 0.8 | µs | CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Either Output Fall Time (3V to 9V) | tF | | 0.2 | 0.3 | µs | CL = 0.1 µF | 5 |
| Either Output Fall Time (3V to 9V) (bold) | tF | | | 0.4 | µs | CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C | 5 |
| Minimum Input Pulse Width that changes the output with LS = 5V | tPW | | 40 | 60 | ns | CL = 0, Note 3 | 5 |
| Minimum Input Pulse Width that changes the output with LS = 0V | tPW | | 13 | 20 | ns | CL = 0, Note 3 | 6 |
| Max. Junction Temperature Range | TJ | -55 | | 150 | °C | Note 1 | 7 |
| Storage Temperature Range | TS | -60 | | 150 | °C | | 7 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 7 |
## CAD (KiCad official)
- Symbol: `MIC4102YM-TR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mic4102ym-tr-etched.step` / `mic4102ym-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4102ym-tr.step` / `mic4102ym-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4102ym-tr-datasheet.pdf) (28 pp, sha256 `eec1b5080fb32c26`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4102ym-tr-datasheet.pdf)