Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4102YM-TR

Microchip Tech · Gate Drive ICs · SOIC-8

MIC4102YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply to the lower gate drivers; decouple this pin to VSS (pin 7), and the on-chip bootstrap diode connects VDD to HB (pin 2).
2 HB power_in High-side bootstrap supply; an external bootstrap capacitor is required, with its positive side connected to this pin, and the bootstrap diode is on-chip.
3 HO output High-side output that connects to the gate of the high-side power MOSFET.
4 HS power_in High-side source connection that connects to the source of the high-side power MOSFET and to the negative side of the bootstrap capacitor.
5 PWM input Control input where a PWM high drives HO high and LO low, and a PWM low drives HO low and LO high.
6 LS input Low-side disable which, when pulled low, immediately terminates LO drive and keeps LO low until the signal is removed, without affecting HS drive.
7 VSS power_in Chip negative supply, generally grounded.
8 LO output Low-side output that connects to the gate of the low-side power MOSFET.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDD, VHB, VHS) VDD, VHB, VHS -0.3 18 V 3
Input Voltages (VPWM, VLS) VPWM, VLS -0.3 V max printed as VDD + 0.3V 3
Voltage on LO (VLO) VLO -0.3 V max printed as VDD + 0.3V 3
Voltage on HS (Continuous) VHS -1 110 V 3
Voltage on HB VHB 118 V 3
Average Current in VDD to HB Diode 100 mA 3
Supply Voltage (VDD) VDD 9 16 V 3
Voltage on HS VHS -1 100 V 3
Voltage on HS (Repetitive Transient) VHS -5 105 V 3
HS Slew Rate 50 V/ns 3
VDD Quiescent Current IDD 150 450 µA PWM = 0V 4
VDD Quiescent Current (bold) IDD 600 µA PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C 4
VDD Operating Current IDDO 3 3.5 mA f = 500 kHz 4
VDD Operating Current (bold) IDDO 4 mA f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C 4
Total HB Quiescent Current IHB 25 150 µA PWM = 0V 4
Total HB Quiescent Current (bold) IHB 200 µA PWM = 0V; bold: -40°C ≤ TJ ≤ +125°C 4
Total HB Operating Current IHBO 1.5 2.5 mA f = 500 kHz 4
Total HB Operating Current (bold) IHBO 3 mA f = 500 kHz; bold: -40°C ≤ TJ ≤ +125°C 4
HB to VSS Quiescent Current IHBS 0.05 1 µA VHS = VHB = 110V 4
HB to VSS Quiescent Current (bold) IHBS 30 µA VHS = VHB = 110V; bold: -40°C ≤ TJ ≤ +125°C 4
Low Level Input Voltage Threshold VIL 0.8 1.5 V 4
High Level Input Voltage Threshold VIH 1.5 2.2 V 4
Input Pull-Down Resistance RI 100 200 500 kΩ 4
VDD Rising Threshold VDDR 6.5 7.3 8 V 4
HB Rising Threshold VHBR 6 7 8 V 4
Low-Current Forward Voltage VDL 0.4 0.55 V VIVDD-HB = 100 µA 4
Low-Current Forward Voltage (bold) VDL 0.7 V VIVDD-HB = 100 µA; bold: -40°C ≤ TJ ≤ +125°C 4
High-Current Forward Voltage VDH 0.7 0.8 V VIVDD-HB = 100 mA 4
High-Current Forward Voltage (bold) VDH 1 V VIVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C 4
Dynamic Resistance RD 1 1.5 Ω IVDD-HB = 100 mA 4
Dynamic Resistance (bold) RD 2 Ω IVDD-HB = 100 mA; bold: -40°C ≤ TJ ≤ +125°C 4
Low Level Output Voltage (LO gate driver) VOLL 0.18 0.3 V VILO = 160 mA 4
Low Level Output Voltage (LO gate driver) (bold) VOLL 0.4 V VILO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C 4
High Level Output Voltage (LO gate driver) VOHL 0.25 0.3 V ILO = -100 mA, VOHL = VDD, VLO 4
High Level Output Voltage (LO gate driver) (bold) VOHL 0.45 V ILO = -100 mA, VOHL = VDD, VLO; bold: -40°C ≤ TJ ≤ +125°C 4
Low Level Output Voltage (HO gate driver) VOLH 0.22 0.3 V VIHO = 160 mA 5
Low Level Output Voltage (HO gate driver) (bold) VOLH 0.4 V VIHO = 160 mA; bold: -40°C ≤ TJ ≤ +125°C 5
High Level Output Voltage (HO gate driver) VOHH 0.25 0.3 V IHO = -100 mA, VOHH = VHB, VHO 5
High Level Output Voltage (HO gate driver) (bold) VOHH 0.45 V IHO = -100 mA, VOHH = VHB, VHO; bold: -40°C ≤ TJ ≤ +125°C 5
Delay between PWM going high to LO going low tLOOFF 30 45 ns 5
Delay between PWM going high to LO going low (bold) tLOOFF 60 ns bold: -40°C ≤ TJ ≤ +125°C 5
Delay between LO OFF to HO going High tHOON 30 50 ns 5
Delay between LO OFF to HO going High (bold) tHOON 60 ns bold: -40°C ≤ TJ ≤ +125°C 5
Delay between PWM going Low to HO going low tHOOFF 45 65 ns 5
Delay between PWM going Low to HO going low (bold) tHOOFF 70 ns bold: -40°C ≤ TJ ≤ +125°C 5
Switch Node Voltage Threshold when HO turns off VSWth 1 2.5 4 V 5
Delay between HO MOSFET being considered off to LO turning ON tLOON 30 60 ns 5
Delay between HO MOSFET being considered off to LO turning ON (bold) tLOON 70 ns bold: -40°C ≤ TJ ≤ +125°C 5
Delay between LS going low and LO turning OFF tLSOFF 36 45 ns CL = 1000 pF 5
Delay between LS going low and LO turning OFF (bold) tLSOFF 70 ns CL = 1000 pF; bold: -40°C ≤ TJ ≤ +125°C 5
Forced LO ON, if VLOTH is not detected tSWTO 120 250 450 ns 5
Either Output Rise Time (3V to 9V) tR 0.33 0.6 µs CL = 0.1 µF 5
Either Output Rise Time (3V to 9V) (bold) tR 0.8 µs CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C 5
Either Output Fall Time (3V to 9V) tF 0.2 0.3 µs CL = 0.1 µF 5
Either Output Fall Time (3V to 9V) (bold) tF 0.4 µs CL = 0.1 µF; bold: -40°C ≤ TJ ≤ +125°C 5
Minimum Input Pulse Width that changes the output with LS = 5V tPW 40 60 ns CL = 0, Note 3 5
Minimum Input Pulse Width that changes the output with LS = 0V tPW 13 20 ns CL = 0, Note 3 6
Max. Junction Temperature Range TJ -55 150 °C Note 1 7
Storage Temperature Range TS -60 150 °C 7
Operating Junction Temperature Range TJ -40 125 °C 7

CAD (KiCad official)

  • Symbol: MIC4102YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic4102ym-tr-etched.step / mic4102ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4102ym-tr.step / mic4102ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 eec1b5080fb32c26, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF