main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic39301-2-5wu: viewers · Ray
mic39301-2-5wu-etched.glb Publish 0.1.0 · Ray
mic39301-2-5wu-etched.step mic39301-2-5wu: factory component page (tier=mfr) · Ray
mic39301-2-5wu-hero.glb mic39301-2-5wu: hero GLB from the etched model (keeps the MPN mark) · Ray
mic39301-2-5wu-hero.overlay.json Publish 0.1.0 · Ray
mic39301-2-5wu.glb Publish 0.1.0 · Ray
mic39301-2-5wu.kicad_mod Publish 0.1.0 · Ray
mic39301-2-5wu.kicad_sym Publish 0.1.0 · Ray
mic39301-2-5wu.lbr Publish 0.1.0 · Ray
mic39301-2-5wu.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

MIC39301-2.5WU

Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5

MIC39301-2.5WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input is TTL/CMOS compatible: logic-high enables the regulator, while logic-low or open puts it in shutdown, and it can be connected to up to 20V per the enable input section.
2 IN power_in Unregulated input with a +16V maximum supply; the operating supply voltage range is +2.5V to +16V.
3 GND power_in Ground pin, internally connected to the TAB.
4 OUT power_out Regulator output.
5 FLG output Error flag is an open-collector, active-low output that signals an output fault condition, can sink 10 mA during a fault, and requires a pull-up resistor from FLG to VIN or VOUT.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (10 mA) VOUT -1 1 % 10 mA 4
Output Voltage (10 mA ≤ IOUT ≤ 3A) VOUT -2 2 % 10 mA ≤ IOUT ≤ 3A, VOUT + 1V ≤ VIN ≤ 8V 4
Line Regulation ΔVOUT/ΔVIN 0.06 0.5 % IOUT = 10 mA, VOUT + 1V ≤ VIN ≤ 8V 4
Load Regulation ΔVOUT/VOUT 0.2 1 % VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 3A 4
Output Voltage Temperature Coefficient ΔVOUT/ΔT 20 100 ppm/°C 4
Dropout Voltage VDO 65 200 mV IOUT = 100 mA, ΔVOUT = -1% 4
Dropout Voltage VDO 185 mV IOUT = 750 mA, ΔVOUT = -1% 4
Dropout Voltage VDO 250 mV IOUT = 1.5A, ΔVOUT = -1% 4
Dropout Voltage VDO 385 550 mV IOUT = 3A, ΔVOUT = -1% 4
Ground Current IGND 10 20 mA IOUT = 750 mA, VIN = VOUT + 1V 4
Ground Current IGND 17 mA IOUT = 1.5A, VIN = VOUT + 1V 4
Ground Current IGND 45 mA IOUT = 3A, VIN = VOUT + 1V 4
Enable Input Voltage (logic low, OFF) VEN 0.8 V Logic low (OFF) 4
Enable Input Voltage (logic high, ON) VEN 2.5 V Logic high (ON) 4
Enable Input Current IIN 15 75 µA VEN = 2.5V 4
Enable Input Current IIN 90 µA VEN = 16V 4
Enable Input Current IIN 4 µA VEN = 0.8V 4
Shutdown Output Current IOUT(shdn) 10 20 µA 5
Output Leakage Current (Flag) IFLG(leak) 0.01 1 µA VIN = 16V 5
Output Leakage Current (Flag) IFLG(leak) 2 µA VIN = 16V 5
Output Low Voltage (Flag) VFLG(do) 220 300 mV VIN = 2.50V, IOL = 250 µA 5
Output Low Voltage (Flag) VFLG(do) 400 mV VIN = 2.50V, IOL = 250 µA 5
Low Threshold (Flag) VFLG 93 % % of VOUT 5
High Threshold (Flag) VFLG 99.2 % % of VOUT 5
Supply Voltage (VIN) absolute maximum VIN -20 20 V 4
Enable Voltage (VEN) absolute maximum VEN 20 V 4
Supply Voltage (VIN) operating range VIN 2.5 16 V 4
Enable Voltage (VEN) operating range VEN 16 V 4
Junction Operating Temperature Range TJ -40 125 °C 6
Storage Temperature Range TS -65 150 °C 6
Lead Temperature 260 °C Soldering, 5 sec. 6
Thermal Resistance TO-263 (junction to case) JC 2 °C/W 6

CAD (KiCad official)

  • Symbol: MIC39301-2.5WU
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic39301-2-5wu-etched.step / mic39301-2-5wu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic39301-2-5wu.step / mic39301-2-5wu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 c73342827d6fee55, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF