3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC39301-2.5WU
Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5
MIC39301-2.5WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input is TTL/CMOS compatible: logic-high enables the regulator, while logic-low or open puts it in shutdown, and it can be connected to up to 20V per the enable input section. |
| 2 | IN | power_in | Unregulated input with a +16V maximum supply; the operating supply voltage range is +2.5V to +16V. |
| 3 | GND | power_in | Ground pin, internally connected to the TAB. |
| 4 | OUT | power_out | Regulator output. |
| 5 | FLG | output | Error flag is an open-collector, active-low output that signals an output fault condition, can sink 10 mA during a fault, and requires a pull-up resistor from FLG to VIN or VOUT. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (10 mA) | VOUT | -1 | 1 | % | 10 mA | 4 | |
| Output Voltage (10 mA ≤ IOUT ≤ 3A) | VOUT | -2 | 2 | % | 10 mA ≤ IOUT ≤ 3A, VOUT + 1V ≤ VIN ≤ 8V | 4 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.06 | 0.5 | % | IOUT = 10 mA, VOUT + 1V ≤ VIN ≤ 8V | 4 | |
| Load Regulation | ΔVOUT/VOUT | 0.2 | 1 | % | VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 3A | 4 | |
| Output Voltage Temperature Coefficient | ΔVOUT/ΔT | 20 | 100 | ppm/°C | 4 | ||
| Dropout Voltage | VDO | 65 | 200 | mV | IOUT = 100 mA, ΔVOUT = -1% | 4 | |
| Dropout Voltage | VDO | 185 | mV | IOUT = 750 mA, ΔVOUT = -1% | 4 | ||
| Dropout Voltage | VDO | 250 | mV | IOUT = 1.5A, ΔVOUT = -1% | 4 | ||
| Dropout Voltage | VDO | 385 | 550 | mV | IOUT = 3A, ΔVOUT = -1% | 4 | |
| Ground Current | IGND | 10 | 20 | mA | IOUT = 750 mA, VIN = VOUT + 1V | 4 | |
| Ground Current | IGND | 17 | mA | IOUT = 1.5A, VIN = VOUT + 1V | 4 | ||
| Ground Current | IGND | 45 | mA | IOUT = 3A, VIN = VOUT + 1V | 4 | ||
| Enable Input Voltage (logic low, OFF) | VEN | 0.8 | V | Logic low (OFF) | 4 | ||
| Enable Input Voltage (logic high, ON) | VEN | 2.5 | V | Logic high (ON) | 4 | ||
| Enable Input Current | IIN | 15 | 75 | µA | VEN = 2.5V | 4 | |
| Enable Input Current | IIN | 90 | µA | VEN = 16V | 4 | ||
| Enable Input Current | IIN | 4 | µA | VEN = 0.8V | 4 | ||
| Shutdown Output Current | IOUT(shdn) | 10 | 20 | µA | 5 | ||
| Output Leakage Current (Flag) | IFLG(leak) | 0.01 | 1 | µA | VIN = 16V | 5 | |
| Output Leakage Current (Flag) | IFLG(leak) | 2 | µA | VIN = 16V | 5 | ||
| Output Low Voltage (Flag) | VFLG(do) | 220 | 300 | mV | VIN = 2.50V, IOL = 250 µA | 5 | |
| Output Low Voltage (Flag) | VFLG(do) | 400 | mV | VIN = 2.50V, IOL = 250 µA | 5 | ||
| Low Threshold (Flag) | VFLG | 93 | % | % of VOUT | 5 | ||
| High Threshold (Flag) | VFLG | 99.2 | % | % of VOUT | 5 | ||
| Supply Voltage (VIN) absolute maximum | VIN | -20 | 20 | V | 4 | ||
| Enable Voltage (VEN) absolute maximum | VEN | 20 | V | 4 | |||
| Supply Voltage (VIN) operating range | VIN | 2.5 | 16 | V | 4 | ||
| Enable Voltage (VEN) operating range | VEN | 16 | V | 4 | |||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 5 sec. | 6 | |||
| Thermal Resistance TO-263 (junction to case) | JC | 2 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
MIC39301-2.5WU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic39301-2-5wu-etched.step/mic39301-2-5wu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic39301-2-5wu.step/mic39301-2-5wu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
c73342827d6fee55, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).