main
Ray
Publish 0.1.0
8fcbb64
MIC37252WU
Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5
MIC37252WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input is CMOS compatible: logic high enables the regulator and logic low shuts it down. |
| 2 | VIN | power_in | Input voltage supplies current to the output power device, with a supply range of 3.0V to 6.0V. |
| 3 | GND | power_in | Ground pin for the regulator. |
| 4 | VOUT | power_out | Regulator output. |
| 5 | ADJ | input | Adjustable regulator feedback input, connected to a resistor voltage divider that sets the output voltage between 1.24V and 5.5V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -2 | 2 | % | IL = 10mA | 3 | ||
| Output Voltage Accuracy | -3 | 3 | % | 10mA < IOUT < IL(max), VOUT + 1 ≤ VIN ≤ 6V | 3 | ||
| Output Voltage Line Regulation | 0.02 | 0.5 | % | VIN = VOUT + 1.0V to 6.0V, IL = 10mA | 3 | ||
| Output Voltage Load Regulation | 0.2 | 1 | % | IL = 10mA to 2.5A | 3 | ||
| Dropout Voltage | VIN - VOUT | 400 | 500 | mV | IL = 1.5A | 3 | |
| Dropout Voltage | VIN - VOUT | 550 | 1000 | mV | IL = 2.5A | 3 | |
| Ground Pin Current | IGND | 40 | 60 | mA | IL = 2.5A | 3 | |
| Ground Pin Current in Shutdown | IGND | 1 | µA | VIL ≤ 0.5V, VIN = VOUT + 1V | 3 | ||
| Current Limit | 3 | A | VOUT = 0; VIN = 3.3V | 3 | |||
| Start-up Time | 150 | 250 | µs | VEN = VIN, IOUT = 10mA, COUT = 47µF | 3 | ||
| Enable Input Threshold (Regulator enable) | 2.25 | V | Regulator enable | 3 | |||
| Enable Input Threshold (Regulator shutdown) | 0.8 | V | Regulator shutdown | 3 | |||
| Enable Pin Input Current (shutdown) | 2 | 4 | µA | VIL ≤ 0.8V (Regulator shutdown) | 3 | ||
| Enable Pin Input Current (enable) | 1 | 10 | 30 | µA | VIH ≥ 2.25V (Regulator enable) | 3 | |
| Reference Voltage | VREF | 1.215 | 1.24 | 1.265 | V | 3 | |
| Reference Voltage | VREF | 1.202 | 1.277 | V | bold values, -40°C < TJ < +125°C | 3 | |
| Adjust Pin Bias Current | IADJ | 40 | 80 | nA | 3 | ||
| Adjust Pin Bias Current | IADJ | 120 | nA | bold values, -40°C < TJ < +125°C | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| Lead Temperature | 260 | °C | soldering, 5sec. | 3 | |||
| Supply Voltage (VIN) | VIN | 3 | 6 | V | 3 | ||
| Enable Input Voltage (VEN) | VEN | 0 | 6 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Package Thermal Resistance TO-263-5 (θJC) | θJC | 2 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
MIC37252WU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic37252wu-etched.step/mic37252wu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic37252wu.step/mic37252wu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
6541759690c8c600, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC37252WU
**Microchip Tech** · Linear Voltage Regulators (LDO) · TO-263-5
MIC37252WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input is CMOS compatible: logic high enables the regulator and logic low shuts it down. |
| 2 | VIN | power_in | Input voltage supplies current to the output power device, with a supply range of 3.0V to 6.0V. |
| 3 | GND | power_in | Ground pin for the regulator. |
| 4 | VOUT | power_out | Regulator output. |
| 5 | ADJ | input | Adjustable regulator feedback input, connected to a resistor voltage divider that sets the output voltage between 1.24V and 5.5V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | | -2 | | 2 | % | IL = 10mA | 3 |
| Output Voltage Accuracy | | -3 | | 3 | % | 10mA < IOUT < IL(max), VOUT + 1 ≤ VIN ≤ 6V | 3 |
| Output Voltage Line Regulation | | | 0.02 | 0.5 | % | VIN = VOUT + 1.0V to 6.0V, IL = 10mA | 3 |
| Output Voltage Load Regulation | | | 0.2 | 1 | % | IL = 10mA to 2.5A | 3 |
| Dropout Voltage | VIN - VOUT | | 400 | 500 | mV | IL = 1.5A | 3 |
| Dropout Voltage | VIN - VOUT | | 550 | 1000 | mV | IL = 2.5A | 3 |
| Ground Pin Current | IGND | | 40 | 60 | mA | IL = 2.5A | 3 |
| Ground Pin Current in Shutdown | IGND | | | 1 | µA | VIL ≤ 0.5V, VIN = VOUT + 1V | 3 |
| Current Limit | | | 3 | | A | VOUT = 0; VIN = 3.3V | 3 |
| Start-up Time | | | 150 | 250 | µs | VEN = VIN, IOUT = 10mA, COUT = 47µF | 3 |
| Enable Input Threshold (Regulator enable) | | 2.25 | | | V | Regulator enable | 3 |
| Enable Input Threshold (Regulator shutdown) | | | | 0.8 | V | Regulator shutdown | 3 |
| Enable Pin Input Current (shutdown) | | | 2 | 4 | µA | VIL ≤ 0.8V (Regulator shutdown) | 3 |
| Enable Pin Input Current (enable) | | 1 | 10 | 30 | µA | VIH ≥ 2.25V (Regulator enable) | 3 |
| Reference Voltage | VREF | 1.215 | 1.24 | 1.265 | V | | 3 |
| Reference Voltage | VREF | 1.202 | | 1.277 | V | bold values, -40°C < TJ < +125°C | 3 |
| Adjust Pin Bias Current | IADJ | | 40 | 80 | nA | | 3 |
| Adjust Pin Bias Current | IADJ | | | 120 | nA | bold values, -40°C < TJ < +125°C | 3 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Storage Temperature | TS | -65 | | 150 | °C | | 3 |
| Lead Temperature | | | | 260 | °C | soldering, 5sec. | 3 |
| Supply Voltage (VIN) | VIN | 3 | | 6 | V | | 3 |
| Enable Input Voltage (VEN) | VEN | 0 | | 6 | V | | 3 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| Package Thermal Resistance TO-263-5 (θJC) | θJC | | 2 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `MIC37252WU`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `mic37252wu-etched.step` / `mic37252wu-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic37252wu.step` / `mic37252wu.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic37252wu-datasheet.pdf) (8 pp, sha256 `6541759690c8c600`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic37252wu-datasheet.pdf)