Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC37252WU

Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5

MIC37252WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input is CMOS compatible: logic high enables the regulator and logic low shuts it down.
2 VIN power_in Input voltage supplies current to the output power device, with a supply range of 3.0V to 6.0V.
3 GND power_in Ground pin for the regulator.
4 VOUT power_out Regulator output.
5 ADJ input Adjustable regulator feedback input, connected to a resistor voltage divider that sets the output voltage between 1.24V and 5.5V.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy -2 2 % IL = 10mA 3
Output Voltage Accuracy -3 3 % 10mA < IOUT < IL(max), VOUT + 1 ≤ VIN ≤ 6V 3
Output Voltage Line Regulation 0.02 0.5 % VIN = VOUT + 1.0V to 6.0V, IL = 10mA 3
Output Voltage Load Regulation 0.2 1 % IL = 10mA to 2.5A 3
Dropout Voltage VIN - VOUT 400 500 mV IL = 1.5A 3
Dropout Voltage VIN - VOUT 550 1000 mV IL = 2.5A 3
Ground Pin Current IGND 40 60 mA IL = 2.5A 3
Ground Pin Current in Shutdown IGND 1 µA VIL ≤ 0.5V, VIN = VOUT + 1V 3
Current Limit 3 A VOUT = 0; VIN = 3.3V 3
Start-up Time 150 250 µs VEN = VIN, IOUT = 10mA, COUT = 47µF 3
Enable Input Threshold (Regulator enable) 2.25 V Regulator enable 3
Enable Input Threshold (Regulator shutdown) 0.8 V Regulator shutdown 3
Enable Pin Input Current (shutdown) 2 4 µA VIL ≤ 0.8V (Regulator shutdown) 3
Enable Pin Input Current (enable) 1 10 30 µA VIH ≥ 2.25V (Regulator enable) 3
Reference Voltage VREF 1.215 1.24 1.265 V 3
Reference Voltage VREF 1.202 1.277 V bold values, -40°C < TJ < +125°C 3
Adjust Pin Bias Current IADJ 40 80 nA 3
Adjust Pin Bias Current IADJ 120 nA bold values, -40°C < TJ < +125°C 3
Junction Temperature TJ -40 125 °C 3
Storage Temperature TS -65 150 °C 3
Lead Temperature 260 °C soldering, 5sec. 3
Supply Voltage (VIN) VIN 3 6 V 3
Enable Input Voltage (VEN) VEN 0 6 V 3
Junction Temperature Range TJ -40 125 °C 3
Package Thermal Resistance TO-263-5 (θJC) θJC 2 °C/W 3

CAD (KiCad official)

  • Symbol: MIC37252WU
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic37252wu-etched.step / mic37252wu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic37252wu.step / mic37252wu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (8 pp, sha256 6541759690c8c600, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF