main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic3203ym: viewers · Ray
mic3203ym-etched.glb mic3203ym: factory component page (tier=mfr) · Ray
mic3203ym-etched.step mic3203ym: factory component page (tier=mfr) · Ray
mic3203ym-hero.glb mic3203ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic3203ym-hero.overlay.json mic3203ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic3203ym.glb Publish 0.1.0 · Ray
mic3203ym.kicad_mod Publish 0.1.0 · Ray
mic3203ym.kicad_sym Publish 0.1.0 · Ray
mic3203ym.lbr Publish 0.1.0 · Ray
mic3203ym.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MIC3203YM

Microchip Tech · LED Drivers · SOIC-8

MIC3203YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_out Voltage regulator output that supplies the internal circuitry, bypassed with a 1 μF ceramic capacitor placed as close as possible to VCC and AGND, and not to be connected to an external load.
2 CS input High-side current-sense input that sets the LED current with an external sense resistor.
3 VIN power_in Input supply pin for the internal circuitry and positive input to the current-sense comparator, bypassed with a 10 μF ceramic capacitor placed as close as possible to VIN and PGND.
4 AGND power_in Ground pin for analog circuitry, serving as the internal signal ground for all low-power sections.
5 EN input Logic-level enable input that must be at least 2.2V to enable the current regulator, must not be driven above the supply voltage, and reduces supply current below 1 μA when pulled low.
6 DIM input PWM dimming input that must be at least 2.0V to enable the output, and a low level disables the output regardless of the EN state.
7 PGND power_in Power ground for the high-current switching of the power FET, which should be kept as small as possible and separate from the AGND loop.
8 DRV output Gate-drive output that connects to the gate of an external N-channel MOSFET whose drain connects to the inductor, with its high-frequency, high-voltage switch node routed away from sensitive nodes.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 4.5 42 V 3
Supply Current IS 1 3 mA DRV = open 3
Shutdown Current ISD 1 μA VEN = 0V 3
VIN UVLO Threshold UVLO 3.2 4 4.5 V VIN rising 3
VCC Output Voltage VCC 4.5 5 5.5 V VIN = 12V, ICC = 10 mA 3
Current Sense Voltage Upper Threshold VCS(MAX) 201.4 212 222.6 mV 3
Current Sense Voltage Upper Threshold VCS(MAX) 199 212 225 mV VCS(MAX) = VIN, VCS 3
Current Sense Voltage Lower Threshold VCS(MIN) 168 177 186 mV 3
Current Sense Voltage Lower Threshold VCS(MIN) 165 177 189 mV VCS(MIN) = VIN, VCS 3
CS Input Current IIN(CS) 0.5 10 μA VIN, VCS = 220 mV 4
Switching Frequency fSW 1.5 MHz 4
VCS Hysteresis Dithering Range VDITH -6 6 mV 4
Frequency Dithering Range fDITHER -12 12 % Percent of Switching Frequency 4
EN Logic Level High VENH 2.2 V 4
EN Logic Level Low VENL 0.4 V 4
EN Bias Current IEN 60 μA VEN = 12V 4
EN Bias Current IEN 1 μA VEN = 0V 4
DIM Logic Level High VDIMH 2 V 4
DIM Logic Level Low VDIML 0.4 V 4
DIM Bias Current IDIM 20 50 μA 4
DIM Bias Current IDIM 1 μA VDIM = 0V 4
Maximum Dimming Frequency fDIM 20 kHz 4
VIN to PGND VIN -0.3 45 V 3
VCC to PGND VCC -0.3 6 V 3
CS to PGND VCS -0.3 V maximum (VIN + 0.3V) 3
EN to AGND VEN -0.3 V maximum (VIN + 0.3V) 3
DIM to AGND VDIM -0.3 V maximum (VIN + 0.3V) 3
DRV to PGND VDRV -0.3 V maximum (VCC + 0.3V) 3
PGND to AGND -0.3 0.3 V 3
ESD Rating HBM 1.5 kV Human body model, 1.5 kΩ in series with 100 pF 3
Supply Voltage VIN 4.5 42 V Operating Ratings 3
Enable Input Voltage VEN 0 V up to VIN 3
Dimming Input Voltage VDIM 0 V up to VIN 3
Operating Junction Temperature Range TJ -40 125 °C Note 1 5
Maximum Junction Temperature TJ(MAX) 150 °C 5
Storage Temperature Range TS -60 150 °C 5
Lead Temperature TLEAD 260 °C Soldering, 10 sec. 5
Thermal Resistance, SOIC 8-Ld junction to air θJA 98.9 °C/W 5
Thermal Resistance, SOIC 8-Ld junction to case θJC 48.8 °C/W 5

CAD (KiCad official)

  • Symbol: MIC3203YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic3203ym-etched.step / mic3203ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic3203ym.step / mic3203ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet, copy hosted by LCSC (28 pp, sha256 f0cc0338148ed5a7, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF