Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC29503WU-TR

Microchip Tech · Power Management Specialized - PMIC · TO-263-5

MIC29503WU-TR from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FLAG output Active-low error flag output that indicates an output fault condition; it is an open-collector output that may sink 10 mA.
2 INPUT power_in Supplies the current to the output power device; the overvoltage sensor disables the regulator when the input voltage exceeds approximately 32V.
3 GND power_in Ground pin; the TAB is also connected internally to the IC ground.
4 OUTPUT power_out The regulator output voltage.
5 ADJUST input Adjustable regulator feedback input that connects to the resistor divider from OUTPUT to GND to set the output voltage, which can be programmed between 1.25V and 25V.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT -1 1 % IOUT = 10 mA 5
Output Voltage VOUT -2 2 % 10 mA ≤ IOUT ≤ IFL, (VOUT + 1V) ≤ VIN ≤26V (Note 3) 5
Line Regulation 0.06 0.5 % IOUT = 10 mA, (VOUT + 1V) ≤ VIN ≤ 26V 5
Load Regulation 0.2 1 % VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 1.5A (Note 3, Note 4) 5
Output Voltage Temperature Coefficient ΔVO/ΔT 20 100 ppm/°C Output Voltage (Note 4) 5
Dropout Voltage 125 250 mV MIC2950x IOUT = 250 mA 5
Dropout Voltage 370 600 mV MIC2950x IOUT = 5A 5
Ground Current IGND 15 50 mA MIC2950x IOUT = 2.5A, VIN = VOUT + 1V 5
Current Limit ILIM 7.5 10 A MIC2950x, VOUT = 0V, (Note 7) 5
Reference Voltage 1.228 1.24 1.252 V 6
Reference Voltage 1.215 1.265 V Bold values: -40°C ≤ TJ ≤ +125°C 6
Reference Voltage 1.203 1.277 V Note 8 6
Adjust Pin Bias Current 40 80 nA 6
Adjust Pin Bias Current 120 nA Bold values: -40°C ≤ TJ ≤ +125°C 6
Output Leakage Current (Flag) 0.01 1 µA VOH = 26V 6
Output Leakage Current (Flag) 2 µA VOH = 26V; bold values: -40°C ≤ TJ ≤ +125°C 6
Output Low Voltage VOL 220 300 mV Device set for 5V, VIN = 4.5V 6
Output Low Voltage VOL 400 mV IOL = 250 µA; bold values: -40°C ≤ TJ ≤ +125°C 6
Upper Threshold Voltage 40 60 mV Device set for 5V, (Note 10) 6
Upper Threshold Voltage 25 mV Device set for 5V, (Note 10); bold values: -40°C ≤ TJ ≤ +125°C 6
Lower Threshold Voltage 75 95 mV Device set for 5V, (Note 10) 6
Lower Threshold Voltage 140 mV Device set for 5V, (Note 10); bold values: -40°C ≤ TJ ≤ +125°C 6
Input Supply Voltage VIN -20 60 V Note 1 4
Enable Input Voltage VEN -0.3 V Upper limit printed as VIN 4
Maximum Operating Input Voltage 26 V 4
Storage Temperature Range TS -65 150 °C 8
Operating Junction Temperature TJ -40 125 °C 8
Lead Temperature 260 °C Soldering, 5 sec. 8
Dropout Voltage 250 mV MIC2950x IOUT = 2.5A 5
Ground Current IGND 70 mA MIC2950x IOUT = 5A 5
Ground Pin Current at Dropout IGRNDDO 2.1 mA MIC2950x, VIN = 0.5V less than specified VOUT × IOUT = 10 mA 5
Thermal Resistance TO-263 (junction to case) θJC 2 °C/W 8

CAD (KiCad official)

  • Symbol: MIC29503WU-TR
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic29503wu-tr-etched.step / mic29503wu-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic29503wu-tr.step / mic29503wu-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (42 pp, sha256 e4243475719303fc, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF