MIC2860-2DYD6-TR

{
  "slug": "mic2860-2dyd6-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Pre-ordered MCUs, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mic2860-2dyd6-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic2860-2dyd6-tr.kicad_sym",
    "mic2860-2dyd6-tr.kicad_mod",
    "mic2860-2dyd6-tr.glb",
    "mic2860-2dyd6-tr.step",
    "mic2860-2dyd6-tr.lbr",
    "docs/hero.png",
    "docs/mic2860-2dyd6-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic2860-2dyd6-tr-hero.glb",
    "mic2860-2dyd6-tr-hero.overlay.json",
    "mic2860-2dyd6-tr-etched.glb"
  ],
  "component": {
    "mpn": "MIC2860-2DYD6-TR",
    "manufacturer": "Microchip Tech",
    "package": "TSOT-23-6L",
    "pin_count": 6,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Pre-ordered MCUs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/14b7bad66ac05d4e6d4ea636da51a2f5.pdf",
    "parts": {
      "symbol": "mic2860-2dyd6-tr.kicad_sym",
      "footprint": "mic2860-2dyd6-tr.kicad_mod",
      "model_3d": "mic2860-2dyd6-tr-hero.glb",
      "model_3d_plain": "mic2860-2dyd6-tr-etched.glb",
      "model_3d_step": "mic2860-2dyd6-tr-etched.step",
      "model_3d_step_plain": "mic2860-2dyd6-tr.step",
      "lbr": "mic2860-2dyd6-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C625779",
      "digikey": "576-3939-2-ND",
      "mouser": "998-MIC2860-2DYD6TR"
    },
    "distributor_check": {
      "checked_at": "2026-10-25T20:10:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "576-3939-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "998-MIC2860-2DYD6TR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SC",
        "type": "input",
        "description": "Serial control digital input that acts as the enable for the linear drivers and the single-wire dimming input; VSC must stay between 0V and VIN, with logic low at 0.4V max and logic high at 1.4V min, and the pin must not be left floating."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground path for the linear drivers; the input capacitor ground should be routed with low impedance and kept as short as possible to this pin."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Voltage input with an operating range of 3.0V to 5.5V (absolute maximum -0.3V to +6V); connect at least a 1µF ceramic capacitor between VIN and GND."
      },
      {
        "number": "4",
        "name": "D2",
        "type": "output",
        "description": "LED2 driver: connect the LED anode to VIN and the cathode to this pin, with LED2 driver voltage limited to 0V to VIN and the pin not left floating."
      },
      {
        "number": "5",
        "name": "RSET",
        "type": "passive",
        "description": "Connect an external resistor from this pin to GND to set the maximum LED current, for example 9.53kΩ gives 30.2mA at 100% duty cycle."
      },
      {
        "number": "6",
        "name": "D1",
        "type": "output",
        "description": "LED1 driver: connect the LED anode to VIN and the cathode to this pin, with LED1 driver voltage limited to 0V to VIN and the pin not left floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The -TR suffix in the requested MPN is a tape-and-reel packaging code and does not appear in the dat; The Pin Configuration top-view drawings for the Thin SOT-23 package were not present in the extracte; The datasheet does not give pin types. The types for D1, D2 (output) and RSET (passive) are inferred"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0443,
        "at": "2026-10-25T20:10:00"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/14b7bad66ac05d4e6d4ea636da51a2f5.pdf",
        "pages": 12,
        "sha256": "f61f638666578ec6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic2860-2dyd6-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-25",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic2860-2dyd6-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "06b97a5e7c67916c556f427ed6adc434ec0b4d5dab5b7c9ab27cb3146bddd482",
        "checked": "2026-10-25",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}