Generated by kicad-footprint-generator · KiCad file format 20260206
MIC26603YJL-TR
Microchip Tech · DC-DC Converters · QFN-28(5x6)
MIC26603YJL-TR from Microchip Tech, in a QFN-28(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PVDD | power_out | 5V internal LDO output from VIN that supplies the power MOSFET gate drive, tied to PVIN when VIN < 5.5V, with a 2.2µF ceramic capacitor to PGND (pin 2) placed next to the IC. |
| 2 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 3 | NC | unconnected | No connect. |
| 4 | SW | power_out | Switch node connecting the high-side MOSFET source and low-side MOSFET drain, to be routed away from sensitive nodes due to high-speed switching. |
| 5 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 6 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 7 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 8 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 9 | SW | power_out | Switch node connecting the high-side MOSFET source and low-side MOSFET drain, to be routed away from sensitive nodes due to high-speed switching. |
| 10 | SW | power_out | Switch node connecting the high-side MOSFET source and low-side MOSFET drain, to be routed away from sensitive nodes due to high-speed switching. |
| 11 | SW | power_out | Switch node connecting the high-side MOSFET source and low-side MOSFET drain, to be routed away from sensitive nodes due to high-speed switching. |
| 12 | SW | power_out | Switch node connecting the high-side MOSFET source and low-side MOSFET drain, to be routed away from sensitive nodes due to high-speed switching. |
| 13 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 14 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 15 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 16 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 17 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 18 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 19 | PVIN | power_in | High-side N-MOSFET drain input with 4.5V to 26V operating range, requiring input capacitors to PGND with short connections. |
| 20 | BST | passive | Bootstrapped supply for the high-side N-channel MOSFET driver, with a Schottky diode to PVDD, a 0.1µF capacitor to SW, and an optional small series resistor to slow high-side turn-on. |
| 21 | PGND | power_in | Power ground for the buck converter power stage, connecting to the low-side MOSFET gate drive return, MOSFET sources and input/output capacitor negative terminals, with the loop kept small and separate from the SGND loop. |
| 22 | CS | input | Current sense input monitoring the low-side MOSFET voltage during OFF-time for short-circuit protection and zero-current detection, connected to the low-side MOSFET drain via Kelvin connection to SW, and also the high-side MOSFET driver return. |
| 23 | SGND | power_in | Signal ground that must be connected directly to the ground planes and not routed to the PGND pad on the top layer. |
| 24 | FB | input | Feedback input to the transconductance amplifier, regulated to 0.8V, with a resistor divider from the output setting the output voltage. |
| 25 | PG | output | Open-drain power good output pulled up externally with a resistor to VDD, asserted high when VOUT is above 92% of nominal. |
| 26 | EN | input | CMOS-compatible enable input where logic high enables and logic low shuts down (typically 5µA supply current), and it must not be left open. |
| 27 | VIN | power_in | Power supply input (4.5V to 28V operating) requiring a bypass capacitor to SGND. |
| 28 | VDD | power_out | 5V internal LDO output from VIN supplying the IC control circuit, tied to PVIN pins when VIN < 5.5V, with a 1.0µF ceramic capacitor to SGND placed next to the IC. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28(5x6) |
| Category | Power Management |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range (VIN, PVIN) | VIN | 4.5 | 28 | V | 4 | ||
| Quiescent Supply Current | IQ | 450 | 750 | µA | VFB = 1.5V (non-switching) | 4 | |
| Shutdown Supply Current | 5 | 10 | µA | VEN = 0V | 4 | ||
| VDD Output Voltage | VDD | 4.8 | 5 | 5.4 | V | VIN = 7V to 28V, IDD = 40mA | 4 |
| VDD UVLO Threshold | 3.7 | 4.2 | 4.5 | V | VDD Rising | 4 | |
| Dropout Voltage (VIN, VDD) | 380 | 600 | mV | IDD = 25mA | 4 | ||
| Output-Voltage Adjust Range | VOUT | 0.8 | 5.5 | V | 4 | ||
| Reference (±1.0%) | VREF | 0.792 | 0.8 | 0.808 | V | 0°C ≤ TJ ≤ 85°C | 4 |
| Reference (±1.5%) | VREF | 0.788 | 0.8 | 0.812 | V | −40°C ≤ TJ ≤ 125°C | 4 |
| FB Bias Current | 50 | 500 | nA | VFB = 0.8V | 4 | ||
| EN Logic Level High | 1.8 | V | 4 | ||||
| EN Logic Level Low | 0.6 | V | 4 | ||||
| EN Bias Current | 6 | 30 | µA | VEN = 12V | 4 | ||
| Switching Frequency | 450 | 600 | 750 | kHz | Measured in test mode | 4 | |
| Current-Limit Threshold (25°C) | 7.5 | 13 | 17 | A | VFB = 0.8V, TJ = 25°C | 5 | |
| Current-Limit Threshold (125°C) | 6.6 | 13 | 17 | A | VFB = 0.8V, TJ = 125°C | 5 | |
| Power Good Threshold Voltage | 85 | 92 | 95 | %VOUT | Sweep VFB from Low to High | 5 | |
| Power Good Low Voltage | 70 | 200 | mV | Sweep VFB < 0.9 × VNOM, IPG = 1mA | 5 | ||
| Load Regulation | 0.25 | % | IOUT = 1A to 6A (Continuous Mode) | 4 | |||
| Line Regulation | 0.25 | % | VIN = 4.5V to 28V | 4 | |||
| VDD UVLO Hysteresis | 400 | mV | 4 | ||||
| Maximum Duty Cycle | 82 | % | VFB = 0V | 4 | |||
| Minimum Duty Cycle | 0 | % | VFB = 1.0V | 4 | |||
| Minimum Off-Time | 300 | ns | 4 | ||||
| Soft-Start time | 5 | ms | 5 | ||||
| Short-Circuit Current | 2.7 | A | VFB = 0V | 5 | |||
| Top-MOSFET RDS(ON) | RDS(ON) | 42 | mΩ | ISW = 3A | 5 | ||
| Bottom-MOSFET RDS(ON) | RDS(ON) | 12.5 | mΩ | ISW = 3A | 5 | ||
| SW Leakage Current | 60 | µA | VEN = 0V | 5 | |||
| VIN Leakage Current | 25 | µA | VEN = 0V | 5 | |||
| Power Good Hysteresis | 5.5 | %VOUT | Sweep VFB from High to Low | 5 | |||
| Power Good Delay Time | 100 | µs | Sweep VFB from Low to High | 5 | |||
| Over-Temperature Shutdown | 160 | °C | TJ Rising | 5 | |||
| Over-Temperature Shutdown Hysteresis | 15 | °C | 5 | ||||
| PVIN to PGND | -0.3 | 29 | V | 4 | |||
| VIN to PGND | -0.3 | V | upper limit PVIN | 4 | |||
| PVDD, VDD to PGND | -0.3 | 6 | V | 4 | |||
| VBST to VSW | -0.3 | 6 | V | 4 | |||
| VBST to PGND | -0.3 | 35 | V | 4 | |||
| PGND to SGND | -0.3 | 0.3 | V | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| Lead Temperature | 260 | °C | soldering, 10sec | 4 | |||
| Supply Voltage (PVIN, VIN) | 4.5 | 28 | V | 4 | |||
| PVDD, VDD Supply Voltage | 4.5 | 5.5 | V | 4 | |||
| Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Package Thermal Resistance | θJA | 28 | °C/W | 5 sq in 4-layer FR-4 PCB, 2oz copper | 4 |
CAD (KiCad official)
- Symbol:
MIC26603YJL-TR - Footprint:
Package_DFN_QFN:QFN-28-1EP_5x6mm_P0.5mm_EP3.65x4.65mm - 3D model: QFN-28(5x6) (KiCad packages3D, STEP)
- 3D model files:
mic26603yjl-tr-etched.step/mic26603yjl-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic26603yjl-tr.step/mic26603yjl-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
da013cde7364f29e, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).