main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic23158yml-tr: viewers · Ray
mic23158yml-tr-etched.glb Publish 0.1.0 · Ray
mic23158yml-tr-etched.step mic23158yml-tr: factory component page (tier=mfr) · Ray
mic23158yml-tr-hero.glb mic23158yml-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
mic23158yml-tr-hero.overlay.json Publish 0.1.0 · Ray
mic23158yml-tr.glb Publish 0.1.0 · Ray
mic23158yml-tr.kicad_mod Publish 0.1.0 · Ray
mic23158yml-tr.kicad_sym Publish 0.1.0 · Ray
mic23158yml-tr.lbr Publish 0.1.0 · Ray
mic23158yml-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 21 pins · Ray

MIC23158YML-TR

Microchip Tech · DC-DC Converters · QFN-20-EP(4x3)

MIC23158YML-TR from Microchip Tech, in a QFN-20-EP(4x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN1 power_in Power input voltage for regulator 1, with a 2.7V to 5.5V operating range; connect a capacitor to ground to decouple noise and switching transients.
2 PGND1 power_in Power ground for regulator 1, carrying the high current in PWM mode.
3 SW1 output Switch output from the internal power MOSFETs of regulator 1, connected to one end of the inductor.
4 SW2 output Switch output from the internal power MOSFETs of regulator 2, connected to one end of the inductor.
5 PGND2 power_in Power ground for regulator 2, carrying the high current in PWM mode.
6 VIN2 power_in Power input voltage for regulator 2, with a 2.7V to 5.5V operating range; connect a capacitor to ground to decouple noise and switching transients.
7 AVIN2 power_in Analog input voltage for regulator 2 that must be tied to VIN2 and decoupled to ground with a capacitor.
8 AGND2 power_in Analog ground for regulator 2, to be connected at a central ground point where the high-current paths meet (CIN, COUT, PGND2).
9 EN2 input Enable input for regulator 2: logic high enables operation, logic low shuts it down, and it must not be left floating.
10 SNS2 input Sense input for regulator 2, connected to the regulator 2 output as close to the output capacitor as possible.
11 FB2 input Feedback input for regulator 2, fed by a resistor divider from the VOUT2 output to ground to set the output voltage against the 0.62V reference.
12 PG2 output Open-drain power good output for regulator 2, which needs a pull-up resistor to VOUT2 to indicate a power good condition.
13 SS2 passive Soft-start for regulator 2; connect a minimum of 200 pF to ground to set its turn-on time, and do not leave it floating.
14 SS1 passive Soft-start for regulator 1; connect a minimum of 200 pF to ground to set its turn-on time, and do not leave it floating.
15 PG1 output Open-drain power good output for regulator 1, which needs a pull-up resistor to VOUT1 to indicate a power good condition.
16 FB1 input Feedback input for regulator 1, fed by a resistor divider from the VOUT1 output to ground to set the output voltage against the 0.62V reference.
17 SNS1 input Sense input for regulator 1, connected to the regulator 1 output as close to the output capacitor as possible.
18 EN1 input Enable input for regulator 1: logic high enables operation, logic low shuts it down, and it must not be left floating.
19 AGND1 power_in Analog ground for regulator 1, to be connected at a central ground point where the high-current paths meet (CIN, COUT, PGND1).
20 AVIN1 power_in Analog input voltage for regulator 1 that must be tied to VIN1 and decoupled to ground with a capacitor.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20-EP(4x3)
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range 2.7 5.5 V 4
Undervoltage Lockout Threshold 2.45 2.55 2.65 V Rising 4
Quiescent Current 45 90 µA IOUT = 0 mA, SNS > 1.2 * VOUTNOM (both outputs) 4
Shutdown Current ISHDN 0.1 5 µA VEN = 0V; VIN = 5.5V (per output) 4
Feedback Regulation Voltage VFB 0.6045 0.62 0.6355 V VIOUT = 20 mA 4
Current Limit ILIM 2.2 4.3 A SNS = 0.9 * VOUTNOM 4
Power Good Threshold 86 92 96 % Rising 5
Enable Input Voltage (logic low) 0.4 V Logic low 5
Enable Input Voltage (logic high) 1.2 V Logic high 5
Enable Input Current 0.1 2 µA 5
Supply Voltage (AVIN1, VIN1) 2.7 5.5 V 4
Supply Voltage (AVIN2, VIN2) 2.7 5.5 V 4
Enable Input Voltage (VEN1, VEN2) VEN1, VEN2 0 V 4
Output Voltage Range (VSNS1, VSNS2) VSNS1, VSNS2 1 3.3 V 4
Operating Junction Temperature Range TJ -40 125 °C 6
Supply Voltage (AVIN1, AVIN2, VIN1, VIN2) -0.3 6 V 4
Switch1 (VSW1), Sense1 (VSNS1) VSW1, VSNS1 -0.3 V 4
Enable1 (VEN1), Power Good (VPG1) VEN1, VPG1 -0.3 V 4
Feedback1 (VFB1) VFB1 -0.3 V 4
Switch2 (VSW2), Sense2 (VSNS2) VSW2, VSNS2 -0.3 V 4
Enable2 (VEN2), Power Good2 (VPG2) VEN2, VPG2 -0.3 V 4
Feedback2 (VFB2) VFB2 -0.3 V 4
Storage Temperature Range TS -65 150 °C 6
Lead Temperature 260 °C Soldering, 10s 6
Thermal Resistance 3 mm x 4 mm QFN-20 JA 53 °C/W 6

CAD (KiCad official)

  • Symbol: MIC23158YML-TR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm
  • 3D model: QFN-20-EP(4x3) (KiCad packages3D, STEP)
  • 3D model files: mic23158yml-tr-etched.step / mic23158yml-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic23158yml-tr.step / mic23158yml-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 9aa210b7a7cfdba4, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF