3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC23158YML-TR
Microchip Tech · DC-DC Converters · QFN-20-EP(4x3)
MIC23158YML-TR from Microchip Tech, in a QFN-20-EP(4x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN1 | power_in | Power input voltage for regulator 1, with a 2.7V to 5.5V operating range; connect a capacitor to ground to decouple noise and switching transients. |
| 2 | PGND1 | power_in | Power ground for regulator 1, carrying the high current in PWM mode. |
| 3 | SW1 | output | Switch output from the internal power MOSFETs of regulator 1, connected to one end of the inductor. |
| 4 | SW2 | output | Switch output from the internal power MOSFETs of regulator 2, connected to one end of the inductor. |
| 5 | PGND2 | power_in | Power ground for regulator 2, carrying the high current in PWM mode. |
| 6 | VIN2 | power_in | Power input voltage for regulator 2, with a 2.7V to 5.5V operating range; connect a capacitor to ground to decouple noise and switching transients. |
| 7 | AVIN2 | power_in | Analog input voltage for regulator 2 that must be tied to VIN2 and decoupled to ground with a capacitor. |
| 8 | AGND2 | power_in | Analog ground for regulator 2, to be connected at a central ground point where the high-current paths meet (CIN, COUT, PGND2). |
| 9 | EN2 | input | Enable input for regulator 2: logic high enables operation, logic low shuts it down, and it must not be left floating. |
| 10 | SNS2 | input | Sense input for regulator 2, connected to the regulator 2 output as close to the output capacitor as possible. |
| 11 | FB2 | input | Feedback input for regulator 2, fed by a resistor divider from the VOUT2 output to ground to set the output voltage against the 0.62V reference. |
| 12 | PG2 | output | Open-drain power good output for regulator 2, which needs a pull-up resistor to VOUT2 to indicate a power good condition. |
| 13 | SS2 | passive | Soft-start for regulator 2; connect a minimum of 200 pF to ground to set its turn-on time, and do not leave it floating. |
| 14 | SS1 | passive | Soft-start for regulator 1; connect a minimum of 200 pF to ground to set its turn-on time, and do not leave it floating. |
| 15 | PG1 | output | Open-drain power good output for regulator 1, which needs a pull-up resistor to VOUT1 to indicate a power good condition. |
| 16 | FB1 | input | Feedback input for regulator 1, fed by a resistor divider from the VOUT1 output to ground to set the output voltage against the 0.62V reference. |
| 17 | SNS1 | input | Sense input for regulator 1, connected to the regulator 1 output as close to the output capacitor as possible. |
| 18 | EN1 | input | Enable input for regulator 1: logic high enables operation, logic low shuts it down, and it must not be left floating. |
| 19 | AGND1 | power_in | Analog ground for regulator 1, to be connected at a central ground point where the high-current paths meet (CIN, COUT, PGND1). |
| 20 | AVIN1 | power_in | Analog input voltage for regulator 1 that must be tied to VIN1 and decoupled to ground with a capacitor. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-20-EP(4x3) |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | 2.7 | 5.5 | V | 4 | |||
| Undervoltage Lockout Threshold | 2.45 | 2.55 | 2.65 | V | Rising | 4 | |
| Quiescent Current | 45 | 90 | µA | IOUT = 0 mA, SNS > 1.2 * VOUTNOM (both outputs) | 4 | ||
| Shutdown Current | ISHDN | 0.1 | 5 | µA | VEN = 0V; VIN = 5.5V (per output) | 4 | |
| Feedback Regulation Voltage | VFB | 0.6045 | 0.62 | 0.6355 | V | VIOUT = 20 mA | 4 |
| Current Limit | ILIM | 2.2 | 4.3 | A | SNS = 0.9 * VOUTNOM | 4 | |
| Power Good Threshold | 86 | 92 | 96 | % | Rising | 5 | |
| Enable Input Voltage (logic low) | 0.4 | V | Logic low | 5 | |||
| Enable Input Voltage (logic high) | 1.2 | V | Logic high | 5 | |||
| Enable Input Current | 0.1 | 2 | µA | 5 | |||
| Supply Voltage (AVIN1, VIN1) | 2.7 | 5.5 | V | 4 | |||
| Supply Voltage (AVIN2, VIN2) | 2.7 | 5.5 | V | 4 | |||
| Enable Input Voltage (VEN1, VEN2) | VEN1, VEN2 | 0 | V | 4 | |||
| Output Voltage Range (VSNS1, VSNS2) | VSNS1, VSNS2 | 1 | 3.3 | V | 4 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| Supply Voltage (AVIN1, AVIN2, VIN1, VIN2) | -0.3 | 6 | V | 4 | |||
| Switch1 (VSW1), Sense1 (VSNS1) | VSW1, VSNS1 | -0.3 | V | 4 | |||
| Enable1 (VEN1), Power Good (VPG1) | VEN1, VPG1 | -0.3 | V | 4 | |||
| Feedback1 (VFB1) | VFB1 | -0.3 | V | 4 | |||
| Switch2 (VSW2), Sense2 (VSNS2) | VSW2, VSNS2 | -0.3 | V | 4 | |||
| Enable2 (VEN2), Power Good2 (VPG2) | VEN2, VPG2 | -0.3 | V | 4 | |||
| Feedback2 (VFB2) | VFB2 | -0.3 | V | 4 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 10s | 6 | |||
| Thermal Resistance 3 mm x 4 mm QFN-20 | JA | 53 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
MIC23158YML-TR - Footprint:
Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm - 3D model: QFN-20-EP(4x3) (KiCad packages3D, STEP)
- 3D model files:
mic23158yml-tr-etched.step/mic23158yml-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic23158yml-tr.step/mic23158yml-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
9aa210b7a7cfdba4, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).