main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mic2288yd5-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mic2288yd5-tr: viewers · Ray
mic2288yd5-tr-etched.fit.json mic2288yd5-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mic2288yd5-tr-etched.glb mic2288yd5-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mic2288yd5-tr-etched.step mic2288yd5-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mic2288yd5-tr.glb Publish 0.1.0 · Ray
mic2288yd5-tr.kicad_mod Publish 0.1.0 · Ray
mic2288yd5-tr.kicad_sym Publish 0.1.0 · Ray
mic2288yd5-tr.lbr Publish 0.1.0 · Ray
mic2288yd5-tr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json mic2288yd5-tr: specified limits as data (metadata.characteristics, 29 rows from the datasheet) · Ray
README.md mic2288yd5-tr: specified limits as data (metadata.characteristics, 29 rows from the datasheet) · Ray

MIC2288YD5-TR

Microchip · DC-DC Converters · TSOT-23-5

MIC2288YD5-TR from Microchip, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch Node (Input): Internal power bipolar collector. Connects to the external boost inductor and Schottky diode. Rated up to 34V switch voltage, 1A typical / 2A absolute max switch current.
2 GND power_in Ground (Return). Device ground return for both signal and power paths on the SOT-23-5 variant.
3 FB input Feedback (Input): 1.24V output voltage sense node. VOUT = 1.24V x (1 + R1/R2). Feedback input current ~-450nA at VFB = 1.24V.
4 EN input Enable (Input): Logic high (>=1.5V) enables the regulator; logic low (<=0.4V) shuts it down. Absolute max range -0.3V to VIN. Enable pin current ~20uA at VEN=10V.
5 VIN power_in Supply (Input): 2.5V to 10V input voltage rail. Absolute max 12V. Quiescent current ~2.8mA (not switching), shutdown current <1uA.

Key specifications

Parameter Value
Manufacturer Microchip
Package TSOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MIC2288YD5-TRBD5
  • MIC2288YD5-TR
  • MIC2288YD5-TRBML
  • MIC2288YD5-TRYML

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Supply Voltage Range VIN 2.5 10 V 3
Under Voltage Lockout VUVLO 1.8 2.1 2.4 V 3
Feedback Voltage (±1%) VFB 1.227 1.24 1.252 V ±1% 3
Feedback Voltage (±2%) (Over Temp) VFB 1.215 1.265 V ±2%, over temperature 3
Line Regulation 0.1 1 % 3V ≤ VIN ≤ 5V 3
Maximum Duty Cycle DMAX 85 90 % 3
Oscillator Frequency fSW 1.05 1.2 1.35 MHz 3
Switch Leakage Current ISW 0.01 5 µA VEN = 0V, VSW = 10V 3
Enable Pin Current IEN 20 40 µA VEN = 10V 3
VIN Quiescent Current IVIN 2.8 5 mA VFB = 2V, (not switching) 3
Shutdown Current ISD 0.1 1 µA VEN = 0V 3
Load Regulation 0.2 % 5mA ≤ IOUT ≤ 40mA 3
Feedback Input Current IFB -450 nA VFB = 1.24V 3
Switch Current Limit ISW 1.2 A 3
Switch Saturation Voltage VSW 550 mV ISW = 1A 3
Enable Threshold, turn on VEN 1.5 V Turn on 3
Enable Threshold, turn off VEN 0.4 V Turn off 3
Overtemperature Threshold TJ 150 °C 3
Overtemperature Shutdown Hysteresis TJ 10 °C 3
Supply Voltage (VIN) VIN 12 V 3
Switch Voltage VSW -0.3 34 V 3
Enable Pin Voltage VEN -0.3 V upper limit printed as VIN 3
FB Voltage VFB 6 V 3
Switch Current ISW 2 A 3
Storage Temperature TS -65 150 °C 3
ESD Rating 2 kV Human body model, 1.5K in series with 100pF 3
Supply Voltage (VIN) operating range VIN 2.5 10 V 3
Junction Temperature Range TJ -40 125 °C 3
Thin SOT-23-5 Package Thermal Impedance θJA 256 °C/W Thin SOT-23-5 3

CAD (KiCad official)

  • Symbol: MIC2288YD5-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mic2288yd5-tr-etched.step / mic2288yd5-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2288yd5-tr.step / mic2288yd5-tr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mic2288yd5-tr.step 85 KB You want the bare part, or you mark your own boards.
mic2288yd5-tr-etched.step 2.4 MB You want the part with MIC2288YD5-TR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 572 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (11 pp, sha256 50fa671174731710, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF