3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownMIC2288YD5-TR
Microchip · DC-DC Converters · TSOT-23-5
MIC2288YD5-TR from Microchip, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch Node (Input): Internal power bipolar collector. Connects to the external boost inductor and Schottky diode. Rated up to 34V switch voltage, 1A typical / 2A absolute max switch current. |
| 2 | GND | power_in | Ground (Return). Device ground return for both signal and power paths on the SOT-23-5 variant. |
| 3 | FB | input | Feedback (Input): 1.24V output voltage sense node. VOUT = 1.24V x (1 + R1/R2). Feedback input current ~-450nA at VFB = 1.24V. |
| 4 | EN | input | Enable (Input): Logic high (>=1.5V) enables the regulator; logic low (<=0.4V) shuts it down. Absolute max range -0.3V to VIN. Enable pin current ~20uA at VEN=10V. |
| 5 | VIN | power_in | Supply (Input): 2.5V to 10V input voltage rail. Absolute max 12V. Quiescent current ~2.8mA (not switching), shutdown current <1uA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | TSOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MIC2288YD5-TRBD5MIC2288YD5-TRMIC2288YD5-TRBMLMIC2288YD5-TRYML
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Supply Voltage Range | VIN | 2.5 | 10 | V | 3 | ||
| Under Voltage Lockout | VUVLO | 1.8 | 2.1 | 2.4 | V | 3 | |
| Feedback Voltage (±1%) | VFB | 1.227 | 1.24 | 1.252 | V | ±1% | 3 |
| Feedback Voltage (±2%) (Over Temp) | VFB | 1.215 | 1.265 | V | ±2%, over temperature | 3 | |
| Line Regulation | 0.1 | 1 | % | 3V ≤ VIN ≤ 5V | 3 | ||
| Maximum Duty Cycle | DMAX | 85 | 90 | % | 3 | ||
| Oscillator Frequency | fSW | 1.05 | 1.2 | 1.35 | MHz | 3 | |
| Switch Leakage Current | ISW | 0.01 | 5 | µA | VEN = 0V, VSW = 10V | 3 | |
| Enable Pin Current | IEN | 20 | 40 | µA | VEN = 10V | 3 | |
| VIN Quiescent Current | IVIN | 2.8 | 5 | mA | VFB = 2V, (not switching) | 3 | |
| Shutdown Current | ISD | 0.1 | 1 | µA | VEN = 0V | 3 | |
| Load Regulation | 0.2 | % | 5mA ≤ IOUT ≤ 40mA | 3 | |||
| Feedback Input Current | IFB | -450 | nA | VFB = 1.24V | 3 | ||
| Switch Current Limit | ISW | 1.2 | A | 3 | |||
| Switch Saturation Voltage | VSW | 550 | mV | ISW = 1A | 3 | ||
| Enable Threshold, turn on | VEN | 1.5 | V | Turn on | 3 | ||
| Enable Threshold, turn off | VEN | 0.4 | V | Turn off | 3 | ||
| Overtemperature Threshold | TJ | 150 | °C | 3 | |||
| Overtemperature Shutdown Hysteresis | TJ | 10 | °C | 3 | |||
| Supply Voltage (VIN) | VIN | 12 | V | 3 | |||
| Switch Voltage | VSW | -0.3 | 34 | V | 3 | ||
| Enable Pin Voltage | VEN | -0.3 | V | upper limit printed as VIN | 3 | ||
| FB Voltage | VFB | 6 | V | 3 | |||
| Switch Current | ISW | 2 | A | 3 | |||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| ESD Rating | 2 | kV | Human body model, 1.5K in series with 100pF | 3 | |||
| Supply Voltage (VIN) operating range | VIN | 2.5 | 10 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Thin SOT-23-5 Package Thermal Impedance | θJA | 256 | °C/W | Thin SOT-23-5 | 3 |
CAD (KiCad official)
- Symbol:
MIC2288YD5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic2288yd5-tr-etched.step/mic2288yd5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2288yd5-tr.step/mic2288yd5-tr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
mic2288yd5-tr.step |
85 KB | You want the bare part, or you mark your own boards. |
mic2288yd5-tr-etched.step |
2.4 MB | You want the part with MIC2288YD5-TR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 572 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip datasheet (11 pp, sha256
50fa671174731710, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).