Generated by kicad-footprint-generator · KiCad file format 20260206
MIC2196YM-TR
Microchip Tech · DC-DC Controllers · SOIC-8
MIC2196YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Internal error amplifier output; connect to a capacitor or series RC network to compensate the regulator's control loop. |
| 2 | FB | input | Feedback input that regulates FB to 1.245V. |
| 3 | EN/UVLO | input | Enable/undervoltage lockout input; low level powers down the device to under 0.5 μA, output switching is disabled below 1.5V (accurate UVLO with 100 mV hysteresis) and micropower shutdown is forced below 0.9V. |
| 4 | CS | input | The (+) input to the current limit comparator and current amplifier; a built-in 100 mV offset between CS and GND with the sense resistor sets the current limit threshold. |
| 5 | VDD | power_out | 3V internal linear regulator output and supply bus for the chip; bypass to GND with 1 μF. |
| 6 | GND | power_in | Ground. |
| 7 | OUTN | output | High current drive for N-channel MOSFET with voltage swing from ground to VIN and RON typically 3Ω at 5V VIN. |
| 8 | VIN | power_in | Input voltage to the control IC (2.9V to 14V range) that also supplies power to the gate drive circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage Reference (±1%) | VFB | 1.233 | 1.245 | 1.258 | V | ±1% | 3 |
| Feedback Voltage Reference (±2%) | VFB | 1.22 | 1.245 | 1.27 | V | ±2% | 3 |
| Output Voltage Total Regulation | VOUT_TR | 1.208 | 1.282 | V | 3V ≤ VIN ≤ 9V; 0 mV ≤ VCS ≤ 75 mV (±3%) | 3 | |
| VIN Input Current | IQ | 1 | 2 | mA | Excluding external MOSFET gate current | 3 | |
| Shutdown Quiescent Current | IQ_SD | 0.5 | 5 | µA | VEN/UVLO = 0V | 3 | |
| Digital Supply Voltage | VDD | 2.82 | 3 | 3.18 | V | IL = 0 mA | 3 |
| Enable Input Threshold | VEN_TH | 0.6 | 0.9 | 1.2 | V | 3 | |
| UVLO Threshold | UVLOTH | 1.4 | 1.5 | 1.6 | V | 4 | |
| Enable Input Current | IEN | 0.2 | 5 | µA | VEN/UVLO = 5V | 4 | |
| Current Limit Threshold Voltage | VILIM_TH | 90 | 110 | 130 | mV | Voltage on CS to trip current limit | 4 |
| Oscillator Frequency | fO | 360 | 400 | 440 | kHz | 4 | |
| Output Driver Impedance | DRZ | 2 | 6 | Ω | Source, VIN = 12V | 4 | |
| Output Driver Impedance | DRZ | 3 | 7 | Ω | Source, VIN = 5V | 4 | |
| Storage Temperature Range | TS | -65 | 150 | °C | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Supply Voltage (Operating Ratings) | VIN | 2.9 | 14 | V | 3 | ||
| Supply Voltage | VIN | 15 | V | 3 | |||
| Digital Supply Voltage | VDD | 7 | V | 3 | |||
| Comp Pin Voltage | VCOMP | -0.3 | 3 | V | 3 | ||
| Feedback Pin Voltage | VFB | -0.3 | 3 | V | 3 | ||
| Enable Pin Voltage | VEN/UVLO | -0.3 | 15 | V | 3 | ||
| Current Sense Voltage | VCS | -0.3 | 1 | V | 3 | ||
| ESD Rating | 2 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Thermal Resistance, SOIC 8-Ld | θJA | 140 | °C/W | 4 | |||
| Feedback Bias Current | IFB | 50 | nA | 3 | |||
| Output Voltage Line Regulation | ΔVOUT/(VOUT×ΔVIN) | 0.08 | %/V | 3V ≤ VIN ≤ 9V | 3 | ||
| Output Voltage Load Regulation | ΔVOUT/VOUT | -1.2 | % | 0 mV ≤ VCS ≤ 75 mV | 3 | ||
| Digital Supply Load Regulation | VDD_LR | 0.1 | V | IL = 0 mA to 5 mA | 3 | ||
| Undervoltage Lockout | UVLO | 2.65 | V | VDD upper threshold (turn-on threshold) | 3 | ||
| UVLO Hysteresis | UVLOHYS | 100 | mV | 3 | |||
| Maximum Duty Cycle | DCMAX | 85 | % | VFB = 1.0V | 4 | ||
| Minimum On-Time | tON(MIN) | 165 | ns | VFB = 1.5V | 4 | ||
| Frequency Foldback Frequency | fFOLD | 90 | kHz | 4 | |||
| Rise/Fall Time | tr/tf | 25 | ns | CL = 3300 pF | 4 |
CAD (KiCad official)
- Symbol:
MIC2196YM-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic2196ym-tr-etched.step/mic2196ym-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2196ym-tr.step/mic2196ym-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
27e526992dbaa22b, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).