Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC2196YM-TR

Microchip Tech · DC-DC Controllers · SOIC-8

MIC2196YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Internal error amplifier output; connect to a capacitor or series RC network to compensate the regulator's control loop.
2 FB input Feedback input that regulates FB to 1.245V.
3 EN/UVLO input Enable/undervoltage lockout input; low level powers down the device to under 0.5 μA, output switching is disabled below 1.5V (accurate UVLO with 100 mV hysteresis) and micropower shutdown is forced below 0.9V.
4 CS input The (+) input to the current limit comparator and current amplifier; a built-in 100 mV offset between CS and GND with the sense resistor sets the current limit threshold.
5 VDD power_out 3V internal linear regulator output and supply bus for the chip; bypass to GND with 1 μF.
6 GND power_in Ground.
7 OUTN output High current drive for N-channel MOSFET with voltage swing from ground to VIN and RON typically 3Ω at 5V VIN.
8 VIN power_in Input voltage to the control IC (2.9V to 14V range) that also supplies power to the gate drive circuit.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage Reference (±1%) VFB 1.233 1.245 1.258 V ±1% 3
Feedback Voltage Reference (±2%) VFB 1.22 1.245 1.27 V ±2% 3
Output Voltage Total Regulation VOUT_TR 1.208 1.282 V 3V ≤ VIN ≤ 9V; 0 mV ≤ VCS ≤ 75 mV (±3%) 3
VIN Input Current IQ 1 2 mA Excluding external MOSFET gate current 3
Shutdown Quiescent Current IQ_SD 0.5 5 µA VEN/UVLO = 0V 3
Digital Supply Voltage VDD 2.82 3 3.18 V IL = 0 mA 3
Enable Input Threshold VEN_TH 0.6 0.9 1.2 V 3
UVLO Threshold UVLOTH 1.4 1.5 1.6 V 4
Enable Input Current IEN 0.2 5 µA VEN/UVLO = 5V 4
Current Limit Threshold Voltage VILIM_TH 90 110 130 mV Voltage on CS to trip current limit 4
Oscillator Frequency fO 360 400 440 kHz 4
Output Driver Impedance DRZ 2 6 Ω Source, VIN = 12V 4
Output Driver Impedance DRZ 3 7 Ω Source, VIN = 5V 4
Storage Temperature Range TS -65 150 °C 4
Junction Temperature Range TJ -40 125 °C 4
Supply Voltage (Operating Ratings) VIN 2.9 14 V 3
Supply Voltage VIN 15 V 3
Digital Supply Voltage VDD 7 V 3
Comp Pin Voltage VCOMP -0.3 3 V 3
Feedback Pin Voltage VFB -0.3 3 V 3
Enable Pin Voltage VEN/UVLO -0.3 15 V 3
Current Sense Voltage VCS -0.3 1 V 3
ESD Rating 2 kV Human body model, 1.5 kΩ in series with 100 pF 3
Thermal Resistance, SOIC 8-Ld θJA 140 °C/W 4
Feedback Bias Current IFB 50 nA 3
Output Voltage Line Regulation ΔVOUT/(VOUT×ΔVIN) 0.08 %/V 3V ≤ VIN ≤ 9V 3
Output Voltage Load Regulation ΔVOUT/VOUT -1.2 % 0 mV ≤ VCS ≤ 75 mV 3
Digital Supply Load Regulation VDD_LR 0.1 V IL = 0 mA to 5 mA 3
Undervoltage Lockout UVLO 2.65 V VDD upper threshold (turn-on threshold) 3
UVLO Hysteresis UVLOHYS 100 mV 3
Maximum Duty Cycle DCMAX 85 % VFB = 1.0V 4
Minimum On-Time tON(MIN) 165 ns VFB = 1.5V 4
Frequency Foldback Frequency fFOLD 90 kHz 4
Rise/Fall Time tr/tf 25 ns CL = 3300 pF 4

CAD (KiCad official)

  • Symbol: MIC2196YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic2196ym-tr-etched.step / mic2196ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2196ym-tr.step / mic2196ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 27e526992dbaa22b, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF