main
Ray me8206asg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 8b3fa7b
{
  "schema_version": 1,
  "type": "component",
  "slug": "me8206asg",
  "title": "ME8206ASG",
  "brief": "MICRONE AC-DC Controllers and Regulators, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "me8206asg"
  ],
  "component": {
    "mpn": "ME8206ASG",
    "manufacturer": "MICRONE",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/76bc721590349eeda5ccbedfb35fdf3c.pdf",
    "parts": {
      "symbol": "me8206asg.kicad_sym",
      "footprint": "me8206asg.kicad_mod",
      "model_3d": "me8206asg-etched.glb",
      "model_3d_plain": "me8206asg.glb",
      "model_3d_step": "me8206asg-etched.step",
      "model_3d_step_plain": "me8206asg.step",
      "lbr": "me8206asg.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "DET",
        "type": "input",
        "description": "Valley detection input. Senses the auxiliary winding voltage; when DET crosses zero, the controller waits 300 ns (T_D_DET) then turns on the power MOSFET at the drain-source valley to minimize switching loss and EMI."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from the optocoupler. Open-circuit voltage ~5 V; short-circuit current ~0.5 mA. Enters green mode at 1.7 V, burst mode below 1.05 V (exits at 1.15 V), and asserts over-power protection above 3.7 V for 88 ms."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input (SENSE). Monitors primary switch current across the sense resistor for cycle-by-cycle peak-current control. Max current-limit threshold ~0.85 V at FB=3.3 V; 300 ns leading-edge blanking; 120 ns detect-to-control delay."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference for VCC, signal, and driver return."
      },
      {
        "number": "5",
        "name": "GATE",
        "type": "output",
        "description": "Gate-drive output for the external power MOSFET. Internally clamped to ~16 V (20 V max). Typical rise time ≥150 ns and fall time ≥100 ns into a 3 nF load (1 V-12 V transition)."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Chip supply pin. Recommended operating range 10-30 V (30 V abs max). UVLO turn-on ~14.5 V, turn-off ~8.5 V. Internal 31-36 V clamp (10 mA); OVP trips at ~33 V. Operating current ~1.5 mA (typ) at V_FB=3 V."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Leave floating."
      },
      {
        "number": "8",
        "name": "HV",
        "type": "power_in",
        "description": "High-voltage startup pin. Connects directly to the rectified DC bus (up to 650 V abs max). Internal JFET current source (~400 µA at V_HV=50 V) charges the VCC capacitor at startup, then turns off once VCC crosses UVLO_OFF to reduce standby loss."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/76bc721590349eeda5ccbedfb35fdf3c.pdf",
        "pages": 10,
        "sha256": "e7567ae048e05da2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "me8206asg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "me8206asg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2853cd889f828a5170b25be6678b6a64e08c2eca13cc0b2a0ffb3181bd44964a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "MICRONE",
      "Package": "SOP-8",
      "Category": "PMIC",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "me8206asg"
  ],
  "discovery_pitch": "ME8206ASG (MICRONE) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "me8206asg.kicad_sym",
    "me8206asg.kicad_mod",
    "me8206asg.glb",
    "me8206asg.step",
    "me8206asg.lbr",
    "docs/hero.png",
    "docs/me8206asg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "me8206asg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "ME8206ASG",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T01:55:47.121Z"
}