main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me8206asg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me8206asg: viewers · Ray
me8206asg-etched.fit.json me8206asg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8206asg-etched.glb me8206asg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8206asg-etched.step me8206asg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me8206asg.glb Publish 0.1.0 · Ray
me8206asg.kicad_mod Publish 0.1.0 · Ray
me8206asg.kicad_sym Publish 0.1.0 · Ray
me8206asg.lbr Publish 0.1.0 · Ray
me8206asg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json me8206asg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me8206asg: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME8206ASG

MICRONE · AC-DC Controllers and Regulators · SOP-8

ME8206ASG from MICRONE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DET input Valley detection input. Senses the auxiliary winding voltage; when DET crosses zero, the controller waits 300 ns (T_D_DET) then turns on the power MOSFET at the drain-source valley to minimize switching loss and EMI.
2 FB input Feedback input from the optocoupler. Open-circuit voltage ~5 V; short-circuit current ~0.5 mA. Enters green mode at 1.7 V, burst mode below 1.05 V (exits at 1.15 V), and asserts over-power protection above 3.7 V for 88 ms.
3 CS input Current sense input (SENSE). Monitors primary switch current across the sense resistor for cycle-by-cycle peak-current control. Max current-limit threshold ~0.85 V at FB=3.3 V; 300 ns leading-edge blanking; 120 ns detect-to-control delay.
4 GND power_in Device ground reference for VCC, signal, and driver return.
5 GATE output Gate-drive output for the external power MOSFET. Internally clamped to ~16 V (20 V max). Typical rise time ≥150 ns and fall time ≥100 ns into a 3 nF load (1 V-12 V transition).
6 VCC power_in Chip supply pin. Recommended operating range 10-30 V (30 V abs max). UVLO turn-on ~14.5 V, turn-off ~8.5 V. Internal 31-36 V clamp (10 mA); OVP trips at ~33 V. Operating current ~1.5 mA (typ) at V_FB=3 V.
7 NC unconnected No connection. Leave floating.
8 HV power_in High-voltage startup pin. Connects directly to the rectified DC bus (up to 650 V abs max). Internal JFET current source (~400 µA at V_HV=50 V) charges the VCC capacitor at startup, then turns off once VCC crosses UVLO_OFF to reduce standby loss.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ME8206ASG

CAD (KiCad official)

  • Symbol: ME8206ASG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: me8206asg-etched.step / me8206asg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me8206asg.step / me8206asg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (10 pp, sha256 e7567ae048e05da2, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF