main
History Download
Ray Publish 0.1.0 24f2b16

ME6211C30M5G

MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5

ME6211C30M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power input; the datasheet gives an operating voltage range of 1.2V to 6.0V and an absolute maximum input voltage of 6.5V.
2 VSS power_in Ground reference pin; the absolute maximum voltage range for the CE and VOUT pins is specified relative to VSS (VSS-0.3V to VIN+0.3V).
3 CE input ON/OFF control; for the ME6211C30 the CE High voltage is at least 1.0V to start up and the CE Low voltage is at most 0.5V to shut down, with an absolute maximum CE pin voltage of VSS-0.3V to VIN+0.3V.
4 NC unconnected No connect pin, listed as NC in the pin table with no internal function stated.
5 VOUT power_out Regulated output; for the ME6211C30 the maximum output current is 500mA, and the absolute maximum output voltage range is VSS-0.3V to VIN+0.3V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current ISS 30 60 μA VIN= VOUT+1V 8
Stand-by Current ICEL 0.1 1 μA VCE=0V 8
Maximum Output Current IOUTMAX 500 mA VIN= VOUT+1V 8
Load Regulation ∆VOUT 8 mV VIN= VOUT+1V, 1mA≤IOUT≤100mA 8
Dropout Voltage VDIF1 VDIF1 100 mV IOUT =100mA 8
Dropout Voltage VDIF2 VDIF2 210 mV IOUT =200mA 8
Line Regulation ∆VOUT/∆VIN • VOUT 0.05 %/V IOUT =30mA, VOUT+1V ≤VIN≤6.5V 8
CE High Voltage VCEH 1 V Start up 8
CE Low Voltage VCEL 0.5 V Shut down 8
Output Noise EN 50 uVrms IOUT =40mA,300Hz~50kHz 8
Ripple Rejection Rate PSRR 70 dB VIN=[VOUT+1]V +1Vp-pAC, IOUT=10mA, 1kHz 8
Ripple Rejection Rate PSRR 62 dB VIN=[VOUT+1]V +1Vp-pAC, IOUT=100mA, 10kHz 8
Ripple Rejection Rate PSRR 62 dB VIN=[VOUT+1]V +1Vp-pAC, IOUT=200mA, 10kHz 9
Short-circuit Current ISHORT 65 mA VIN= VOUT+1V, VCE=VIN, VOUT=0V 8
Input Voltage VIN 6.5 V 5
Output Current IOUT 600 mA 5
Operating Temperature Range TOPR -40 150 ℃ 5
Storage Temperature Range TSTG -40 150 ℃ 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro 23

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ME6211C30M5G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: me6211c30m5g-etched.step / me6211c30m5g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me6211c30m5g.step / me6211c30m5g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (23 pp, sha256 23084e9d0d0fd762, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF