3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME6211C30M5G
MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5
ME6211C30M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; the datasheet gives an operating voltage range of 1.2V to 6.0V and an absolute maximum input voltage of 6.5V. |
| 2 | VSS | power_in | Ground reference pin; the absolute maximum voltage range for the CE and VOUT pins is specified relative to VSS (VSS-0.3V to VIN+0.3V). |
| 3 | CE | input | ON/OFF control; for the ME6211C30 the CE High voltage is at least 1.0V to start up and the CE Low voltage is at most 0.5V to shut down, with an absolute maximum CE pin voltage of VSS-0.3V to VIN+0.3V. |
| 4 | NC | unconnected | No connect pin, listed as NC in the pin table with no internal function stated. |
| 5 | VOUT | power_out | Regulated output; for the ME6211C30 the maximum output current is 500mA, and the absolute maximum output voltage range is VSS-0.3V to VIN+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | ISS | 30 | 60 | μA | VIN= VOUT+1V | 8 | |
| Stand-by Current | ICEL | 0.1 | 1 | μA | VCE=0V | 8 | |
| Maximum Output Current | IOUTMAX | 500 | mA | VIN= VOUT+1V | 8 | ||
| Load Regulation | ∆VOUT | 8 | mV | VIN= VOUT+1V, 1mA≤IOUT≤100mA | 8 | ||
| Dropout Voltage VDIF1 | VDIF1 | 100 | mV | IOUT =100mA | 8 | ||
| Dropout Voltage VDIF2 | VDIF2 | 210 | mV | IOUT =200mA | 8 | ||
| Line Regulation | ∆VOUT/∆VIN • VOUT | 0.05 | %/V | IOUT =30mA, VOUT+1V ≤VIN≤6.5V | 8 | ||
| CE High Voltage | VCEH | 1 | V | Start up | 8 | ||
| CE Low Voltage | VCEL | 0.5 | V | Shut down | 8 | ||
| Output Noise | EN | 50 | uVrms | IOUT =40mA,300Hz~50kHz | 8 | ||
| Ripple Rejection Rate | PSRR | 70 | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=10mA, 1kHz | 8 | ||
| Ripple Rejection Rate | PSRR | 62 | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=100mA, 10kHz | 8 | ||
| Ripple Rejection Rate | PSRR | 62 | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=200mA, 10kHz | 9 | ||
| Short-circuit Current | ISHORT | 65 | mA | VIN= VOUT+1V, VCE=VIN, VOUT=0V | 8 | ||
| Input Voltage | VIN | 6.5 | V | 5 | |||
| Output Current | IOUT | 600 | mA | 5 | |||
| Operating Temperature Range | TOPR | -40 | 150 | ℃ | 5 | ||
| Storage Temperature Range | TSTG | -40 | 150 | ℃ | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 23 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ME6211C30M5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
me6211c30m5g-etched.step/me6211c30m5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6211c30m5g.step/me6211c30m5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (23 pp, sha256
23084e9d0d0fd762, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).