main
Ray Publish 0.1.1 bb609bc
{
  "slug": "me3118aspg",
  "version": "0.1.1",
  "type": "component",
  "description": "MICRONE DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "me3118aspg"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "me3118aspg.kicad_sym",
    "me3118aspg.kicad_mod",
    "me3118aspg.glb",
    "me3118aspg.step",
    "me3118aspg.lbr",
    "docs/hero.png",
    "docs/me3118aspg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "me3118aspg-etched.step",
    "me3118aspg-etched.glb"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "ME3118ASPG",
    "manufacturer": "MICRONE",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "DC-DC Converters",
    "parts": {
      "symbol": "me3118aspg.kicad_sym",
      "footprint": "me3118aspg.kicad_mod",
      "model_3d": "me3118aspg-etched.glb",
      "model_3d_plain": "me3118aspg.glb",
      "model_3d_step": "me3118aspg-etched.step",
      "model_3d_step_plain": "me3118aspg.step",
      "lbr": "me3118aspg.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground. Return path for the internal low-side NMOS power switch. Must be connected to AGND (recommended star-tie at a single point to avoid PGND noise coupling into AGND)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input, 4.5 V to 18 V (absolute max 20 V). The device starts operating when VIN is above the UVLO threshold (typ. 4.0 V rising / 3.6 V falling) and EN is high. Bypass with a low-ESR ceramic input capacitor placed close to this pin and PGND."
      },
      {
        "number": "3",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground and reference potential for the internal controller. Must be connected to PGND (single-point tie when a ground plane is not used)."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the internal error amplifier. Set the output voltage with a resistor divider from VOUT to AGND: VO = 0.8 V × (1 + R1/R2). Internal reference VFB = 0.8 V (788-812 mV); input bias current is 200 nA max."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "output",
        "description": "External loop compensation node - output of the internal transconductance error amplifier. Connect a series RC network from COMP to AGND to place the compensation pole/zero pair. Internal clamp limits COMP swing to approximately 0.4 V to 2.5 V."
      },
      {
        "number": "6",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Drive high (≥2 V) to enable the regulator; drive low (≤0.6 V) to shut it down (IOFF ≈ 1 µA typ.). Input hysteresis ~200 mV; input current ≤1 µA. Do not float - tie to VIN if enable control is not needed."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "output",
        "description": "Soft-start pin. An internal 5 µA current source charges an external capacitor from SS to AGND, ramping the internal reference during startup to limit inrush current and provide a monotonic output rise. Typical soft-start time is ~3 ms."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to ground for best PCB layout; do not use as a routing via."
      },
      {
        "number": "9",
        "name": "LX",
        "type": "power_out",
        "description": "Switch node - exposed thermal pad on the ESOP-8. Internally the common drain of the high-side PMOS and low-side NMOS power switches; connect to the external filter inductor. Also serves as the primary thermal dissipation path - solder to a large copper area to lower θJA. Absolute max: −0.7 V to VIN+0.3 V DC (−5 V to 22 V for 20 ns transients)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C427570",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:09:12Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "me3118aspg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "aa1f86df473b51d6fffa82d4ff5a0ca030b07835b04d46a38a7b8cb0f27e418e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "me3118aspg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "14b602835e54f72383e0f7e8560a7ad525e986b237aa53423e34ad034dd619e1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}