main
Ray
me2159bm6g: specified limits as data (metadata.characteristics, 26 rows from the datasheet)
ca05d21
ME2159BM6G
MICRONE · DC-DC Converters · SOT-23-6
ME2159BM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switch (drain) node of the internal N-channel power MOSFET; connects to the boost inductor and Schottky diode anode. Rated for 2A peak switch current with 0.18Ω RDS(on) and a maximum voltage of 16V (absolute max 12V per Abs Max table). |
| 2 | GND | power_in | Device ground return. Should be tied directly to the input and output capacitor grounds on a common ground plane for low-noise operation. |
| 3 | FB | input | Feedback input to the internal error amplifier; regulates to VFB = 0.6V (±2%). Output voltage is set by an external resistive divider: VOUT = 0.6 × (1 + R1/R2). If FB drops below ~0.3V a short-circuit comparator engages. |
| 4 | EN | input | Chip enable, active high. VEN ≥ 1.5V enables the converter; VEN ≤ 0.6V puts the device in shutdown (typ. 0.1µA quiescent). Do not leave floating; absolute max VIN referenced. |
| 5 | VIN | power_in | Main supply input, 2.5V to 5.5V operating range (absolute max 6.0V). UVLO threshold typ. 2.15V with 0.08V hysteresis. Bypass with a low-ESR ceramic capacitor (e.g., 22µF) placed close to the pin. |
| 6 | NC | unconnected | No internal connection. May be left floating or tied to GND for PCB routing convenience. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
ME2159BM6G
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VIN | -0.3 | 6 | V | 4 | ||
| Voltage at EN, FB pins | VEN,VFB | -0.3 | V | 4 | |||
| Voltage at SW pin | VLX | -0.3 | 12 | V | 4 | ||
| LX pin current | ILX | 2200 | mA | VIN=3.0V,VOUT=5.0V | 4 | ||
| Internal power dissipation (SOT23-6) | PD | 300 | mW | SOT23-6 | 4 | ||
| Operating ambient temperature | Topr | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 4 | ||
| Soldering temperature and time | Tsolder | 260 | °C | 10S | 4 | ||
| Input voltage range | VIN | 2.5 | 5.5 | V | 4 | ||
| Under voltage lockout | VUVLO | 2.15 | V | 4 | |||
| UVLO hysteresis | 0.08 | V | 4 | ||||
| Average supply current | ISS1 | 0.8 | 1.5 | mA | VFB=0.55V, Switching | 4 | |
| Quiescent current | ISS2 | 280 | 360 | μA | VFB=0.66V, No Switching | 4 | |
| Shutdown supply current | ISS3 | 0.1 | 5 | μA | VEN=GND | 4 | |
| Operation frequency | FOSC | 0.5 | 0.65 | 0.8 | MHz | VFB=1.0V | 4 |
| Maximum duty cycle | DMAX | 90 | % | 4 | |||
| Minimum duty cycle | DMIN | 22 | % | 4 | |||
| Reference voltage | VFB | 0.588 | 0.6 | 0.612 | V | 4 | |
| Line regulation | 0.03 | 0.1 | %/V | VIN=2.6V to 4.3V | 4 | ||
| Enable voltage | VEN | 1.5 | V | 5 | |||
| Shutdown voltage | VEN | 0.6 | V | 5 | |||
| On resistance of driver | RDS(ON) | 0.18 | Ω | ILX=2A | 5 | ||
| OCP current | IOCP | 2.2 | A | 5 | |||
| Over temperature protection | OTP | 165 | °C | 5 | |||
| OTP hysteresis | OTH | 25 | °C | 5 | |||
| Reference voltage accuracy | -2 | 2 | % | 1 |
CAD (KiCad official)
- Symbol:
ME2159BM6G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
me2159bm6g-etched.step/me2159bm6g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me2159bm6g.step/me2159bm6g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (9 pp, sha256
1556e28eebf27769, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME2159BM6G
**MICRONE** · DC-DC Converters · SOT-23-6
ME2159BM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switch (drain) node of the internal N-channel power MOSFET; connects to the boost inductor and Schottky diode anode. Rated for 2A peak switch current with 0.18Ω RDS(on) and a maximum voltage of 16V (absolute max 12V per Abs Max table). |
| 2 | GND | power_in | Device ground return. Should be tied directly to the input and output capacitor grounds on a common ground plane for low-noise operation. |
| 3 | FB | input | Feedback input to the internal error amplifier; regulates to VFB = 0.6V (±2%). Output voltage is set by an external resistive divider: VOUT = 0.6 × (1 + R1/R2). If FB drops below ~0.3V a short-circuit comparator engages. |
| 4 | EN | input | Chip enable, active high. VEN ≥ 1.5V enables the converter; VEN ≤ 0.6V puts the device in shutdown (typ. 0.1µA quiescent). Do not leave floating; absolute max VIN referenced. |
| 5 | VIN | power_in | Main supply input, 2.5V to 5.5V operating range (absolute max 6.0V). UVLO threshold typ. 2.15V with 0.08V hysteresis. Bypass with a low-ESR ceramic capacitor (e.g., 22µF) placed close to the pin. |
| 6 | NC | unconnected | No internal connection. May be left floating or tied to GND for PCB routing convenience. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `ME2159BM6G`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VIN | -0.3 | | 6 | V | | 4 |
| Voltage at EN, FB pins | VEN,VFB | -0.3 | | | V | | 4 |
| Voltage at SW pin | VLX | -0.3 | | 12 | V | | 4 |
| LX pin current | ILX | | | 2200 | mA | VIN=3.0V,VOUT=5.0V | 4 |
| Internal power dissipation (SOT23-6) | PD | | | 300 | mW | SOT23-6 | 4 |
| Operating ambient temperature | Topr | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 4 |
| Soldering temperature and time | Tsolder | | | 260 | °C | 10S | 4 |
| Input voltage range | VIN | 2.5 | | 5.5 | V | | 4 |
| Under voltage lockout | VUVLO | | 2.15 | | V | | 4 |
| UVLO hysteresis | | | 0.08 | | V | | 4 |
| Average supply current | ISS1 | | 0.8 | 1.5 | mA | VFB=0.55V, Switching | 4 |
| Quiescent current | ISS2 | | 280 | 360 | μA | VFB=0.66V, No Switching | 4 |
| Shutdown supply current | ISS3 | | 0.1 | 5 | μA | VEN=GND | 4 |
| Operation frequency | FOSC | 0.5 | 0.65 | 0.8 | MHz | VFB=1.0V | 4 |
| Maximum duty cycle | DMAX | | 90 | | % | | 4 |
| Minimum duty cycle | DMIN | | 22 | | % | | 4 |
| Reference voltage | VFB | 0.588 | 0.6 | 0.612 | V | | 4 |
| Line regulation | | | 0.03 | 0.1 | %/V | VIN=2.6V to 4.3V | 4 |
| Enable voltage | VEN | | 1.5 | | V | | 5 |
| Shutdown voltage | VEN | | 0.6 | | V | | 5 |
| On resistance of driver | RDS(ON) | | 0.18 | | Ω | ILX=2A | 5 |
| OCP current | IOCP | | 2.2 | | A | | 5 |
| Over temperature protection | OTP | | 165 | | °C | | 5 |
| OTP hysteresis | OTH | | 25 | | °C | | 5 |
| Reference voltage accuracy | | -2 | | 2 | % | | 1 |
## CAD (KiCad official)
- Symbol: `ME2159BM6G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `me2159bm6g-etched.step` / `me2159bm6g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me2159bm6g.step` / `me2159bm6g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me2159bm6g-datasheet.pdf) (9 pp, sha256 `1556e28eebf27769`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me2159bm6g-datasheet.pdf)