Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ME2159BM6G

MICRONE · DC-DC Converters · SOT-23-6

ME2159BM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Power switch (drain) node of the internal N-channel power MOSFET; connects to the boost inductor and Schottky diode anode. Rated for 2A peak switch current with 0.18Ω RDS(on) and a maximum voltage of 16V (absolute max 12V per Abs Max table).
2 GND power_in Device ground return. Should be tied directly to the input and output capacitor grounds on a common ground plane for low-noise operation.
3 FB input Feedback input to the internal error amplifier; regulates to VFB = 0.6V (±2%). Output voltage is set by an external resistive divider: VOUT = 0.6 × (1 + R1/R2). If FB drops below ~0.3V a short-circuit comparator engages.
4 EN input Chip enable, active high. VEN ≥ 1.5V enables the converter; VEN ≤ 0.6V puts the device in shutdown (typ. 0.1µA quiescent). Do not leave floating; absolute max VIN referenced.
5 VIN power_in Main supply input, 2.5V to 5.5V operating range (absolute max 6.0V). UVLO threshold typ. 2.15V with 0.08V hysteresis. Bypass with a low-ESR ceramic capacitor (e.g., 22µF) placed close to the pin.
6 NC unconnected No internal connection. May be left floating or tied to GND for PCB routing convenience.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • ME2159BM6G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VIN -0.3 6 V 4
Voltage at EN, FB pins VEN,VFB -0.3 V 4
Voltage at SW pin VLX -0.3 12 V 4
LX pin current ILX 2200 mA VIN=3.0V,VOUT=5.0V 4
Internal power dissipation (SOT23-6) PD 300 mW SOT23-6 4
Operating ambient temperature Topr -40 125 °C 4
Storage temperature Tstg -40 150 °C 4
Soldering temperature and time Tsolder 260 °C 10S 4
Input voltage range VIN 2.5 5.5 V 4
Under voltage lockout VUVLO 2.15 V 4
UVLO hysteresis 0.08 V 4
Average supply current ISS1 0.8 1.5 mA VFB=0.55V, Switching 4
Quiescent current ISS2 280 360 μA VFB=0.66V, No Switching 4
Shutdown supply current ISS3 0.1 5 μA VEN=GND 4
Operation frequency FOSC 0.5 0.65 0.8 MHz VFB=1.0V 4
Maximum duty cycle DMAX 90 % 4
Minimum duty cycle DMIN 22 % 4
Reference voltage VFB 0.588 0.6 0.612 V 4
Line regulation 0.03 0.1 %/V VIN=2.6V to 4.3V 4
Enable voltage VEN 1.5 V 5
Shutdown voltage VEN 0.6 V 5
On resistance of driver RDS(ON) 0.18 Ω ILX=2A 5
OCP current IOCP 2.2 A 5
Over temperature protection OTP 165 °C 5
OTP hysteresis OTH 25 °C 5
Reference voltage accuracy -2 2 % 1

CAD (KiCad official)

  • Symbol: ME2159BM6G
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: me2159bm6g-etched.step / me2159bm6g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me2159bm6g.step / me2159bm6g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (9 pp, sha256 1556e28eebf27769, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF