main
Ray
md85e50sf4: laser-etched CAD + chip hero (factory 2.0.0 backfill)
2e6b009
MD85E50SF4
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
MD85E50SF4 from Shanghai Mingda Microelectronics, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin. Fixed 5.0V (±2%) with up to 300mA output current. Requires a low-ESR ceramic output capacitor of 2.2µF or greater placed close to the pin. |
| 2 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 4 | EN | input | Enable pin (active high). Drive high (VENH ≥ 1.5V, up to 40V) to enable the regulator; drive low (VENL ≤ 0.6V) to place the device in shutdown with < 1uA ISHUT. Do not leave floating. |
| 5 | GND | power_in | Ground reference for the device. Connect to the system ground plane along with the exposed thermal pad. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 8 | VIN | power_in | Power input pin. Operating range 2.2V to 40V (absolute maximum 45V). Requires a 2.2µF or larger input capacitor placed close to the pin to prevent oscillation. |
| 9 | GND/Thermal Pad | power_in | Exposed thermal pad on the ESOP-8 underside. Electrically connected to the GND node and MUST be soldered to the PCB GND plane for proper thermal performance (RθJB = 80°C/W, PD = 1800mW). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
Ordering variants
MD85E50SF4SF4MD85E50SF4QC3MD85E50SF4QA3MD85E50SF4PA1
CAD (KiCad official)
- Symbol:
MD85E50SF4 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
md85e50sf4-etched.step/md85e50sf4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md85e50sf4.step/md85e50sf4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (None pp, sha256
b57d90f008c009b2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD85E50SF4
**Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
MD85E50SF4 from Shanghai Mingda Microelectronics, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin. Fixed 5.0V (±2%) with up to 300mA output current. Requires a low-ESR ceramic output capacitor of 2.2µF or greater placed close to the pin. |
| 2 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 4 | EN | input | Enable pin (active high). Drive high (VENH ≥ 1.5V, up to 40V) to enable the regulator; drive low (VENL ≤ 0.6V) to place the device in shutdown with < 1uA ISHUT. Do not leave floating. |
| 5 | GND | power_in | Ground reference for the device. Connect to the system ground plane along with the exposed thermal pad. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to GND for improved layout. |
| 8 | VIN | power_in | Power input pin. Operating range 2.2V to 40V (absolute maximum 45V). Requires a 2.2µF or larger input capacitor placed close to the pin to prevent oscillation. |
| 9 | GND/Thermal Pad | power_in | Exposed thermal pad on the ESOP-8 underside. Electrically connected to the GND node and MUST be soldered to the PCB GND plane for proper thermal performance (RθJB = 80°C/W, PD = 1800mW). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
## Ordering variants
- `MD85E50SF4SF4`
- `MD85E50SF4QC3`
- `MD85E50SF4QA3`
- `MD85E50SF4PA1`
## CAD (KiCad official)
- Symbol: `MD85E50SF4`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `md85e50sf4-etched.step` / `md85e50sf4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md85e50sf4.step` / `md85e50sf4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md85e50sf4-datasheet.pdf) (None pp, sha256 `b57d90f008c009b2`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md85e50sf4-datasheet.pdf)