main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs md85e30qc3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers md85e30qc3: viewers · Ray
md85e30qc3-etched.fit.json md85e30qc3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md85e30qc3-etched.glb md85e30qc3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md85e30qc3-etched.step md85e30qc3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md85e30qc3.glb Publish 0.1.0 · Ray
md85e30qc3.kicad_mod Publish 0.1.0 · Ray
md85e30qc3.kicad_sym Publish 0.1.0 · Ray
md85e30qc3.lbr Publish 0.1.0 · Ray
md85e30qc3.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json md85e30qc3: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray
README.md md85e30qc3: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray

MD85E30QC3

Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

MD85E30QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input pin. Operating range 2.2V to 40V; absolute max 45V. Requires a >=2.2uF input capacitor placed close to the pin.
2 GND power_in Ground reference for the regulator. Quiescent (GND) current is typically 1.2-2.3uA depending on output setting.
3 EN input Enable pin (active high). Drive high (VENH >= 1.5V, up to 40V) to enable the regulator; drive low (VENL <= 0.6V) to enter shutdown (ISHUT ~0.1uA at VIN=40V). Not internally pulled; must be driven.
4 NC unconnected No internal connection. Leave floating or tie to a convenient net; do not use for signal routing.
5 VOUT power_out Regulated output voltage pin. Fixed 3.0V (+/-2%) for the MD8530 option, up to 300mA output current with foldback current limiting (~65mA short-circuit). Requires a >=2.2uF low-ESR ceramic output capacitor.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MD85E30QC3
  • MD85E33QC3
  • MD85E36QC3
  • MD85E50QC3
  • MD85A30QC3
  • MD85A33QC3
  • MD85A36QC3
  • MD85A50QC3
  • MD85E30QA3
  • MD85E33QA3
  • MD85E36QA3
  • MD85E50QA3
  • MD85E30PA1
  • MD85E33PA1
  • MD85E36PA1
  • MD85E50PA1
  • MD85E53PA1
  • MD85E57PA1
  • MD85EC0PA1
  • MD85EF0PA1
  • MD85A30PA1
  • MD85A33PA1
  • MD85A36PA1
  • MD85A50PA1
  • MD85AC0PA1
  • MD85E33SF4
  • MD85E50SF4
  • MD85EC0SF4
  • MD85EF0SF4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 2.2 40 V 4
Output Voltage accuracy (multiplier of VOUT(S), as printed) VOUT(S) 0.98 1.02 V VIN= VOUT(S)+2V, IOUT=1mA 4
Dropout Voltage VDROP 4 8 mV VEN=VIN, VOUT(S)=3.3V, IOUT=1mA 4
Dropout Voltage VDROP 1200 1800 mV VEN=VIN, VOUT(S)=3.3V, IOUT=300mA 4
Line Regulation 0.01 0.02 %/V VOUT(S)+2V≤VIN≤40V, IOUT=1mA 4
Load Regulation 20 40 mV VIN = VOUT(S)+2V, 1mA≤IOUT≤300mA, VOUT(S)≤5.3V 4
Temperature Stability -50 50 ppm/℃ VIN = VOUT(S)+2V, IOUT=10mA, -40℃≤Ta≤125℃ 4
GND Current (no load, VOUT(S) 3.0V to 5.3V band) IGND 1 1.5 2.5 uA VEN=VIN, no load, 3.0≤VOUT(S)≤5.3V 4
GND Current at IOUT=100mA IGND 420 uA IOUT=100mA 4
Shutdown Current ISHUT 0.1 1 uA VIN=40.0V, VEN=0 4
Maximum Output Current IOUTMAX 300 350 mA 4
Current Limit ILIM 350 550 mA VIN= VOUT(S)+2V, VOUT = 0.95 ×VOUT(S) 4
Short Circuit Current ISHORT 65 mA VIN=VEN=VOUT(S)+2.0V, VOUT=0V 4
Power Supply Rejection Ratio at 100Hz PSRR 79 dB f=100Hz, IOUT=10mA 4
Power Supply Rejection Ratio at 1kHz PSRR 62 dB f=1kHz, IOUT=10mA 4
Power Supply Rejection Ratio at 10kHz PSRR 48 dB f=10kHz, IOUT=10mA 4
Power Supply Rejection Ratio at 100kHz PSRR 40 dB f=100kHz, IOUT=10mA 4
EN 'H' Level Voltage VENH 1.5 40 V 4
EN 'L' Level Voltage VENL 0 0.6 V 4
EN 'H' Level Current IENH -0.1 0.1 uA VIN=40V, VEN=VIN 4
EN 'L' Level Current IENL -0.1 0.1 uA VIN=40V, VEN=0 4
Over Temperature Protection OTP 170 ℃ IOUT=1mA 4
Input Voltage (absolute maximum) VIN -0.3 45 V 3
Power Dissipation, SOT23-5 PD 250 mW 3
Operating Ambient Temperature Topr -40 85 ℃ 3
Storage Temperature Tstg -40 125 ℃ 3
ESD Protection HBM ESD HBM 5000 V 3
Thermal Resistance junction-to-board, SOT23-5 RθJB 180 ℃/W Mounted on JEDEC standard 4-layer (2s2p) PCB test board 3

CAD (KiCad official)

  • Symbol: MD85E30QC3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: md85e30qc3-etched.step / md85e30qc3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md85e30qc3.step / md85e30qc3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256 b57d90f008c009b2, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF