3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMD85E30QC3
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
MD85E30QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin. Operating range 2.2V to 40V; absolute max 45V. Requires a >=2.2uF input capacitor placed close to the pin. |
| 2 | GND | power_in | Ground reference for the regulator. Quiescent (GND) current is typically 1.2-2.3uA depending on output setting. |
| 3 | EN | input | Enable pin (active high). Drive high (VENH >= 1.5V, up to 40V) to enable the regulator; drive low (VENL <= 0.6V) to enter shutdown (ISHUT ~0.1uA at VIN=40V). Not internally pulled; must be driven. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; do not use for signal routing. |
| 5 | VOUT | power_out | Regulated output voltage pin. Fixed 3.0V (+/-2%) for the MD8530 option, up to 300mA output current with foldback current limiting (~65mA short-circuit). Requires a >=2.2uF low-ESR ceramic output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MD85E30QC3MD85E33QC3MD85E36QC3MD85E50QC3MD85A30QC3MD85A33QC3MD85A36QC3MD85A50QC3MD85E30QA3MD85E33QA3MD85E36QA3MD85E50QA3MD85E30PA1MD85E33PA1MD85E36PA1MD85E50PA1MD85E53PA1MD85E57PA1MD85EC0PA1MD85EF0PA1MD85A30PA1MD85A33PA1MD85A36PA1MD85A50PA1MD85AC0PA1MD85E33SF4MD85E50SF4MD85EC0SF4MD85EF0SF4
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.2 | 40 | V | 4 | ||
| Output Voltage accuracy (multiplier of VOUT(S), as printed) | VOUT(S) | 0.98 | 1.02 | V | VIN= VOUT(S)+2V, IOUT=1mA | 4 | |
| Dropout Voltage | VDROP | 4 | 8 | mV | VEN=VIN, VOUT(S)=3.3V, IOUT=1mA | 4 | |
| Dropout Voltage | VDROP | 1200 | 1800 | mV | VEN=VIN, VOUT(S)=3.3V, IOUT=300mA | 4 | |
| Line Regulation | 0.01 | 0.02 | %/V | VOUT(S)+2V≤VIN≤40V, IOUT=1mA | 4 | ||
| Load Regulation | 20 | 40 | mV | VIN = VOUT(S)+2V, 1mA≤IOUT≤300mA, VOUT(S)≤5.3V | 4 | ||
| Temperature Stability | -50 | 50 | ppm/℃ | VIN = VOUT(S)+2V, IOUT=10mA, -40℃≤Ta≤125℃ | 4 | ||
| GND Current (no load, VOUT(S) 3.0V to 5.3V band) | IGND | 1 | 1.5 | 2.5 | uA | VEN=VIN, no load, 3.0≤VOUT(S)≤5.3V | 4 |
| GND Current at IOUT=100mA | IGND | 420 | uA | IOUT=100mA | 4 | ||
| Shutdown Current | ISHUT | 0.1 | 1 | uA | VIN=40.0V, VEN=0 | 4 | |
| Maximum Output Current | IOUTMAX | 300 | 350 | mA | 4 | ||
| Current Limit | ILIM | 350 | 550 | mA | VIN= VOUT(S)+2V, VOUT = 0.95 ×VOUT(S) | 4 | |
| Short Circuit Current | ISHORT | 65 | mA | VIN=VEN=VOUT(S)+2.0V, VOUT=0V | 4 | ||
| Power Supply Rejection Ratio at 100Hz | PSRR | 79 | dB | f=100Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio at 1kHz | PSRR | 62 | dB | f=1kHz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio at 10kHz | PSRR | 48 | dB | f=10kHz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio at 100kHz | PSRR | 40 | dB | f=100kHz, IOUT=10mA | 4 | ||
| EN 'H' Level Voltage | VENH | 1.5 | 40 | V | 4 | ||
| EN 'L' Level Voltage | VENL | 0 | 0.6 | V | 4 | ||
| EN 'H' Level Current | IENH | -0.1 | 0.1 | uA | VIN=40V, VEN=VIN | 4 | |
| EN 'L' Level Current | IENL | -0.1 | 0.1 | uA | VIN=40V, VEN=0 | 4 | |
| Over Temperature Protection | OTP | 170 | ℃ | IOUT=1mA | 4 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 45 | V | 3 | ||
| Power Dissipation, SOT23-5 | PD | 250 | mW | 3 | |||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| ESD Protection HBM | ESD HBM | 5000 | V | 3 | |||
| Thermal Resistance junction-to-board, SOT23-5 | RθJB | 180 | ℃/W | Mounted on JEDEC standard 4-layer (2s2p) PCB test board | 3 |
CAD (KiCad official)
- Symbol:
MD85E30QC3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
md85e30qc3-etched.step/md85e30qc3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md85e30qc3.step/md85e30qc3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256
b57d90f008c009b2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).