Generated by kicad-footprint-generator · KiCad file format 20260206
MD2134K7-G
Microchip Tech · Power Management Specialized - PMIC · QFN-40(5x5)
MD2134K7-G from Microchip Tech, in a QFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | KA | passive | Kelvin connection A for the A-side output return. |
| 2 | GND | power_in | High current output ground. |
| 3 | C1A | passive | Bypass capacitor to KA; 10nF low ESR X7R ceramic capacitor. |
| 4 | GND | power_in | High current output ground. |
| 5 | VDD | power_in | Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ). |
| 6 | C3A | passive | Bypass capacitor to GND of pin 7; 10nF low ESR X7R ceramic capacitor. |
| 7 | GND | power_in | High current output ground. |
| 8 | VLL | power_in | Supply voltage of logic circuit; VLL is 2.25V to 2.75V (2.5V typ). |
| 9 | DGND | power_in | Digital logic ground. |
| 10 | SCK | input | Serial clock input. |
| 11 | SDI | input | Serial data input. |
| 12 | M3 | input | Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description. |
| 13 | M2 | input | Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description. |
| 14 | M1 | input | Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description. |
| 15 | M0 | input | Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description. |
| 16 | VDD | power_in | Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ). |
| 17 | AGND | power_in | Analog reference ground. |
| 18 | SDO | output | Serial data output. |
| 19 | CS | input | Serial chip select, active low; buffer register loads on rising edge. |
| 20 | LD | input | DAC data register loading clock, active on rising edge. |
| 21 | EN | input | Enable; EN low sets PA and PB to Hi-Z and freezes all internal registers until the next clock rising edge. |
| 22 | VREF | power_in | External reference voltage input; 1.25V to 2.5V. |
| 23 | RFB | passive | Resistor to GND; 71.1kΩ 0.1% for the best accuracy. |
| 24 | GND | power_in | High current output ground. |
| 25 | C3B | passive | Bypass capacitor to GND of pin 24; 10nF low ESR X7R ceramic capacitor. |
| 26 | VDD | power_in | Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ). |
| 27 | GND | power_in | High current output ground. |
| 28 | C1B | passive | Bypass capacitor to KB; 10nF low ESR X7R ceramic capacitor. |
| 29 | GND | power_in | High current output ground. |
| 30 | KB | passive | Kelvin connection B for the B-side output return. |
| 31 | C2B | passive | Bypass capacitor to KB; 10nF low ESR X7R ceramic capacitor. |
| 32 | PB | output | Current sinking source driver output B; external Schottky diode to VDD. |
| 33 | PB | output | Current sinking source driver output B; external Schottky diode to VDD. |
| 34 | PB | output | Current sinking source driver output B; external Schottky diode to VDD. |
| 35 | VSUB | power_in | Substrate voltage must connect to the lowest potential of the IC, the ground; internally connected to the center thermal pad. |
| 36 | VSUB | power_in | Substrate voltage must connect to the lowest potential of the IC, the ground; internally connected to the center thermal pad. |
| 37 | PA | output | Current sinking source driver output A; external Schottky diode to VDD. |
| 38 | PA | output | Current sinking source driver output A; external Schottky diode to VDD. |
| 39 | PA | output | Current sinking source driver output A; external Schottky diode to VDD. |
| 40 | C2A | passive | Bypass capacitor to KA; 10nF low ESR X7R ceramic capacitor. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-40(5x5) |
| Category | Power Supply Chip |
| Pins | 41 |
CAD (KiCad official)
- Symbol:
MD2134K7-G - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40(5x5) (KiCad packages3D, STEP)
- 3D model files:
md2134k7-g-etched.step/md2134k7-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md2134k7-g.step/md2134k7-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (9 pp, sha256
092869a4d07bfd51, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).