Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MD2134K7-G

Microchip Tech · Power Management Specialized - PMIC · QFN-40(5x5)

MD2134K7-G from Microchip Tech, in a QFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 KA passive Kelvin connection A for the A-side output return.
2 GND power_in High current output ground.
3 C1A passive Bypass capacitor to KA; 10nF low ESR X7R ceramic capacitor.
4 GND power_in High current output ground.
5 VDD power_in Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ).
6 C3A passive Bypass capacitor to GND of pin 7; 10nF low ESR X7R ceramic capacitor.
7 GND power_in High current output ground.
8 VLL power_in Supply voltage of logic circuit; VLL is 2.25V to 2.75V (2.5V typ).
9 DGND power_in Digital logic ground.
10 SCK input Serial clock input.
11 SDI input Serial data input.
12 M3 input Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description.
13 M2 input Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description.
14 M1 input Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description.
15 M0 input Control logic for selecting output current level; see the Fast Output Current Level Control Pin Description.
16 VDD power_in Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ).
17 AGND power_in Analog reference ground.
18 SDO output Serial data output.
19 CS input Serial chip select, active low; buffer register loads on rising edge.
20 LD input DAC data register loading clock, active on rising edge.
21 EN input Enable; EN low sets PA and PB to Hi-Z and freezes all internal registers until the next clock rising edge.
22 VREF power_in External reference voltage input; 1.25V to 2.5V.
23 RFB passive Resistor to GND; 71.1kΩ 0.1% for the best accuracy.
24 GND power_in High current output ground.
25 C3B passive Bypass capacitor to GND of pin 24; 10nF low ESR X7R ceramic capacitor.
26 VDD power_in Supplies voltage of the gate driver and internal analog circuit; VDD is 4.75V to 5.25V (5.0V typ).
27 GND power_in High current output ground.
28 C1B passive Bypass capacitor to KB; 10nF low ESR X7R ceramic capacitor.
29 GND power_in High current output ground.
30 KB passive Kelvin connection B for the B-side output return.
31 C2B passive Bypass capacitor to KB; 10nF low ESR X7R ceramic capacitor.
32 PB output Current sinking source driver output B; external Schottky diode to VDD.
33 PB output Current sinking source driver output B; external Schottky diode to VDD.
34 PB output Current sinking source driver output B; external Schottky diode to VDD.
35 VSUB power_in Substrate voltage must connect to the lowest potential of the IC, the ground; internally connected to the center thermal pad.
36 VSUB power_in Substrate voltage must connect to the lowest potential of the IC, the ground; internally connected to the center thermal pad.
37 PA output Current sinking source driver output A; external Schottky diode to VDD.
38 PA output Current sinking source driver output A; external Schottky diode to VDD.
39 PA output Current sinking source driver output A; external Schottky diode to VDD.
40 C2A passive Bypass capacitor to KA; 10nF low ESR X7R ceramic capacitor.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-40(5x5)
Category Power Supply Chip
Pins 41

CAD (KiCad official)

  • Symbol: MD2134K7-G
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: QFN-40(5x5) (KiCad packages3D, STEP)
  • 3D model files: md2134k7-g-etched.step / md2134k7-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md2134k7-g.step / md2134k7-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (9 pp, sha256 092869a4d07bfd51, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF