main
Ray
Publish 0.1.0
64a1c4e
MCP9801-M
Microchip Tech · Temperature Sensors · MSOP-8
MCP9801-M from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | SDA is the bidirectional serial data pin used to transmit data to and from the host controller and requires a pull-up resistor to output data. |
| 2 | SCLK | input | SCLK is the serial clock input pin, and all communication and timing is relative to the clock signal generated by the host controller on the bus. |
| 3 | ALERT | output | ALERT is an open-drain temperature alert output that signals when the ambient temperature goes beyond the user-programmed temperature limit. |
| 4 | GND | power_in | GND is the system ground pin. |
| 5 | A2 | input | A2 is the device address select pin (bit 2), the third least significant bit of the device address, and is available only on the MCP9801/03. |
| 6 | A1 | input | A1 is the device address select pin (bit 1), the second least significant bit of the device address, and is available only on the MCP9801/03. |
| 7 | A0 | input | A0 is the device address select pin (bit 0), the least significant bit of the device address, and is available only on the MCP9801/03. |
| 8 | VDD | power_in | VDD is the power supply input pin, to which the operating voltage specified in the DC electrical specification table is applied. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 3 | ||
| Supply voltage absolute maximum | VDD | 6 | V | 3 | |||
| Voltage at all Input/Output pins | -0.3 | 5.5 | V | 3 | |||
| Ambient temperature with power applied | -55 | 125 | °C | with power applied | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Latch-up current at each pin | -200 | 200 | mA | each pin | 3 | ||
| Operating Current | IDD | 200 | 400 | µA | Continuous Operation | 3 | |
| Shutdown Current | ISHDN | 0.1 | 1 | µA | Shutdown mode | 3 | |
| Temperature Sensor Accuracy, 12-bit, -10°C to +85°C | TACY | -1 | 1 | °C | -10°C < TA +85°C, VDD = 3.3V | 3 | |
| Temperature Sensor Accuracy, 12-bit, -10°C to +125°C | TACY | -2 | 2 | °C | -10°C < TA +125°C, VDD = 3.3V | 3 | |
| Temperature Sensor Accuracy, 12-bit, -55°C to +125°C | TACY | -3 | 3 | °C | -55°C < TA +125°C, VDD = 3.3V | 3 | |
| Conversion time, 9-bit resolution | tCONV | 30 | 75 | ms | 33 samples/sec (typical) | 3 | |
| Conversion time, 10-bit resolution | tCONV | 60 | 150 | ms | 17 samples/sec (typical) | 3 | |
| Conversion time, 11-bit resolution | tCONV | 120 | 300 | ms | 8 samples/sec (typical) | 3 | |
| Conversion time, 12-bit resolution | tCONV | 240 | 600 | ms | 4 samples/sec (typical) | 3 | |
| Alert output high-level current | IOH | 1 | µA | VOH = 5V | 3 | ||
| Alert output low-level voltage | VOL | 0.4 | V | IOL= 3 mA | 3 | ||
| Input current (SCLK, SDA, A0, A1, A2) | IIN | -1 | 1 | µA | 4 | ||
| Output (SDA) low-level voltage | VOL | 0.4 | V | IOL= 3 mA | 4 | ||
| Output (SDA) high-level current | IOH | 1 | µA | VOH = 5V | 4 | ||
| Output (SDA) low-level current | IOL | 6 | mA | VOL = 0.6V | 4 | ||
| Specified temperature range | TA | -55 | 125 | °C | (Note 1) | 4 | |
| Operating temperature range | TA | -55 | 125 | °C | 4 | ||
| Storage temperature range | TA | -65 | 150 | °C | 4 | ||
| Serial port frequency | fSC | 0 | 400 | kHz | I2C MCP9800/01 | 5 | |
| Clock period | tSC | 2.5 | µs | 5 | |||
| Low clock | tLOW | 1.3 | µs | 5 | |||
| High clock | tHIGH | 0.6 | µs | 5 | |||
| Rise time | tR | 20 | 300 | ns | 10% to 90% of VDD (SCLK, SDA) | 5 | |
| Fall time | tF | 20 | 300 | ns | 90% to 10% of VDD (SCLK, SDA) | 5 | |
| Data setup before SCLK high | tSU-DATA | 0.1 | µs | 5 | |||
| Data hold after SCLK low | tH-DATA | 0 | 0.9 | µs | 5 | ||
| Start condition setup time | tSU-START | 0.6 | µs | 5 | |||
| Start condition hold time | tH-START | 0.6 | µs | 5 | |||
| Stop condition setup time | tSU-STOP | 0.6 | µs | 5 | |||
| Bus idle | tIDLE | 1.3 | µs | 5 | |||
| Thermal resistance, junction to ambient, 8L-MSOP | JA | 206 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | MS = Plastic Micro Small Outline (MSOP), 8-lead SN = Plastic SOIC, (150 mil Body), 8-lead | 39 |
CAD (KiCad official)
- Symbol:
MCP9801-M - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp9801-m-etched.step/mcp9801-m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp9801-m.step/mcp9801-m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
258fb1fd5fe119dc, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP9801-M
**Microchip Tech** · Temperature Sensors · MSOP-8
MCP9801-M from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | SDA is the bidirectional serial data pin used to transmit data to and from the host controller and requires a pull-up resistor to output data. |
| 2 | SCLK | input | SCLK is the serial clock input pin, and all communication and timing is relative to the clock signal generated by the host controller on the bus. |
| 3 | ALERT | output | ALERT is an open-drain temperature alert output that signals when the ambient temperature goes beyond the user-programmed temperature limit. |
| 4 | GND | power_in | GND is the system ground pin. |
| 5 | A2 | input | A2 is the device address select pin (bit 2), the third least significant bit of the device address, and is available only on the MCP9801/03. |
| 6 | A1 | input | A1 is the device address select pin (bit 1), the second least significant bit of the device address, and is available only on the MCP9801/03. |
| 7 | A0 | input | A0 is the device address select pin (bit 0), the least significant bit of the device address, and is available only on the MCP9801/03. |
| 8 | VDD | power_in | VDD is the power supply input pin, to which the operating voltage specified in the DC electrical specification table is applied. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | | 5.5 | V | | 3 |
| Supply voltage absolute maximum | VDD | | | 6 | V | | 3 |
| Voltage at all Input/Output pins | | -0.3 | | 5.5 | V | | 3 |
| Ambient temperature with power applied | | -55 | | 125 | °C | with power applied | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Latch-up current at each pin | | -200 | | 200 | mA | each pin | 3 |
| Operating Current | IDD | | 200 | 400 | µA | Continuous Operation | 3 |
| Shutdown Current | ISHDN | | 0.1 | 1 | µA | Shutdown mode | 3 |
| Temperature Sensor Accuracy, 12-bit, -10°C to +85°C | TACY | -1 | | 1 | °C | -10°C < TA +85°C, VDD = 3.3V | 3 |
| Temperature Sensor Accuracy, 12-bit, -10°C to +125°C | TACY | -2 | | 2 | °C | -10°C < TA +125°C, VDD = 3.3V | 3 |
| Temperature Sensor Accuracy, 12-bit, -55°C to +125°C | TACY | -3 | | 3 | °C | -55°C < TA +125°C, VDD = 3.3V | 3 |
| Conversion time, 9-bit resolution | tCONV | | 30 | 75 | ms | 33 samples/sec (typical) | 3 |
| Conversion time, 10-bit resolution | tCONV | | 60 | 150 | ms | 17 samples/sec (typical) | 3 |
| Conversion time, 11-bit resolution | tCONV | | 120 | 300 | ms | 8 samples/sec (typical) | 3 |
| Conversion time, 12-bit resolution | tCONV | | 240 | 600 | ms | 4 samples/sec (typical) | 3 |
| Alert output high-level current | IOH | | | 1 | µA | VOH = 5V | 3 |
| Alert output low-level voltage | VOL | | | 0.4 | V | IOL= 3 mA | 3 |
| Input current (SCLK, SDA, A0, A1, A2) | IIN | -1 | | 1 | µA | | 4 |
| Output (SDA) low-level voltage | VOL | | | 0.4 | V | IOL= 3 mA | 4 |
| Output (SDA) high-level current | IOH | | | 1 | µA | VOH = 5V | 4 |
| Output (SDA) low-level current | IOL | 6 | | | mA | VOL = 0.6V | 4 |
| Specified temperature range | TA | -55 | | 125 | °C | (Note 1) | 4 |
| Operating temperature range | TA | -55 | | 125 | °C | | 4 |
| Storage temperature range | TA | -65 | | 150 | °C | | 4 |
| Serial port frequency | fSC | 0 | | 400 | kHz | I2C MCP9800/01 | 5 |
| Clock period | tSC | 2.5 | | | µs | | 5 |
| Low clock | tLOW | 1.3 | | | µs | | 5 |
| High clock | tHIGH | 0.6 | | | µs | | 5 |
| Rise time | tR | 20 | | 300 | ns | 10% to 90% of VDD (SCLK, SDA) | 5 |
| Fall time | tF | 20 | | 300 | ns | 90% to 10% of VDD (SCLK, SDA) | 5 |
| Data setup before SCLK high | tSU-DATA | 0.1 | | | µs | | 5 |
| Data hold after SCLK low | tH-DATA | 0 | | 0.9 | µs | | 5 |
| Start condition setup time | tSU-START | 0.6 | | | µs | | 5 |
| Start condition hold time | tH-START | 0.6 | | | µs | | 5 |
| Stop condition setup time | tSU-STOP | 0.6 | | | µs | | 5 |
| Bus idle | tIDLE | 1.3 | | | µs | | 5 |
| Thermal resistance, junction to ambient, 8L-MSOP | JA | | 206 | | °C/W | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | MS = Plastic Micro Small Outline (MSOP), 8-lead SN = Plastic SOIC, (150 mil Body), 8-lead | 39 |
## CAD (KiCad official)
- Symbol: `MCP9801-M`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mcp9801-m-etched.step` / `mcp9801-m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp9801-m.step` / `mcp9801-m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp9801-m-datasheet.pdf) (42 pp, sha256 `258fb1fd5fe119dc`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp9801-m-datasheet.pdf)