main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp9801-m: viewers · Ray
mcp9801-m-etched.glb Publish 0.1.0 · Ray
mcp9801-m-etched.step mcp9801-m: factory component page (tier=mfr) · Ray
mcp9801-m-hero.glb mcp9801-m: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp9801-m-hero.overlay.json Publish 0.1.0 · Ray
mcp9801-m.glb Publish 0.1.0 · Ray
mcp9801-m.kicad_mod Publish 0.1.0 · Ray
mcp9801-m.kicad_sym Publish 0.1.0 · Ray
mcp9801-m.lbr Publish 0.1.0 · Ray
mcp9801-m.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MCP9801-M

Microchip Tech · Temperature Sensors · MSOP-8

MCP9801-M from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional SDA is the bidirectional serial data pin used to transmit data to and from the host controller and requires a pull-up resistor to output data.
2 SCLK input SCLK is the serial clock input pin, and all communication and timing is relative to the clock signal generated by the host controller on the bus.
3 ALERT output ALERT is an open-drain temperature alert output that signals when the ambient temperature goes beyond the user-programmed temperature limit.
4 GND power_in GND is the system ground pin.
5 A2 input A2 is the device address select pin (bit 2), the third least significant bit of the device address, and is available only on the MCP9801/03.
6 A1 input A1 is the device address select pin (bit 1), the second least significant bit of the device address, and is available only on the MCP9801/03.
7 A0 input A0 is the device address select pin (bit 0), the least significant bit of the device address, and is available only on the MCP9801/03.
8 VDD power_in VDD is the power supply input pin, to which the operating voltage specified in the DC electrical specification table is applied.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 2.7 5.5 V 3
Supply voltage absolute maximum VDD 6 V 3
Voltage at all Input/Output pins -0.3 5.5 V 3
Ambient temperature with power applied -55 125 °C with power applied 3
Junction temperature TJ 150 °C 3
Latch-up current at each pin -200 200 mA each pin 3
Operating Current IDD 200 400 µA Continuous Operation 3
Shutdown Current ISHDN 0.1 1 µA Shutdown mode 3
Temperature Sensor Accuracy, 12-bit, -10°C to +85°C TACY -1 1 °C -10°C < TA +85°C, VDD = 3.3V 3
Temperature Sensor Accuracy, 12-bit, -10°C to +125°C TACY -2 2 °C -10°C < TA +125°C, VDD = 3.3V 3
Temperature Sensor Accuracy, 12-bit, -55°C to +125°C TACY -3 3 °C -55°C < TA +125°C, VDD = 3.3V 3
Conversion time, 9-bit resolution tCONV 30 75 ms 33 samples/sec (typical) 3
Conversion time, 10-bit resolution tCONV 60 150 ms 17 samples/sec (typical) 3
Conversion time, 11-bit resolution tCONV 120 300 ms 8 samples/sec (typical) 3
Conversion time, 12-bit resolution tCONV 240 600 ms 4 samples/sec (typical) 3
Alert output high-level current IOH 1 µA VOH = 5V 3
Alert output low-level voltage VOL 0.4 V IOL= 3 mA 3
Input current (SCLK, SDA, A0, A1, A2) IIN -1 1 µA 4
Output (SDA) low-level voltage VOL 0.4 V IOL= 3 mA 4
Output (SDA) high-level current IOH 1 µA VOH = 5V 4
Output (SDA) low-level current IOL 6 mA VOL = 0.6V 4
Specified temperature range TA -55 125 °C (Note 1) 4
Operating temperature range TA -55 125 °C 4
Storage temperature range TA -65 150 °C 4
Serial port frequency fSC 0 400 kHz I2C MCP9800/01 5
Clock period tSC 2.5 µs 5
Low clock tLOW 1.3 µs 5
High clock tHIGH 0.6 µs 5
Rise time tR 20 300 ns 10% to 90% of VDD (SCLK, SDA) 5
Fall time tF 20 300 ns 90% to 10% of VDD (SCLK, SDA) 5
Data setup before SCLK high tSU-DATA 0.1 µs 5
Data hold after SCLK low tH-DATA 0 0.9 µs 5
Start condition setup time tSU-START 0.6 µs 5
Start condition hold time tH-START 0.6 µs 5
Stop condition setup time tSU-STOP 0.6 µs 5
Bus idle tIDLE 1.3 µs 5
Thermal resistance, junction to ambient, 8L-MSOP JA 206 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin MS = Plastic Micro Small Outline (MSOP), 8-lead SN = Plastic SOIC, (150 mil Body), 8-lead 39

CAD (KiCad official)

  • Symbol: MCP9801-M
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp9801-m-etched.step / mcp9801-m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp9801-m.step / mcp9801-m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (42 pp, sha256 258fb1fd5fe119dc, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF