main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp79520t-i: viewers · Ray
mcp79520t-i-etched.glb Publish 0.1.0 · Ray
mcp79520t-i-etched.step mcp79520t-i: factory component page (tier=mfr) · Ray
mcp79520t-i-hero.glb mcp79520t-i: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp79520t-i-hero.overlay.json Publish 0.1.0 · Ray
mcp79520t-i.glb Publish 0.1.0 · Ray
mcp79520t-i.kicad_mod Publish 0.1.0 · Ray
mcp79520t-i.kicad_sym Publish 0.1.0 · Ray
mcp79520t-i.lbr Publish 0.1.0 · Ray
mcp79520t-i.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

MCP79520T-I

Microchip Tech · Real-time Clocks (RTC) · MSOP-10

MCP79520T-I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Quartz crystal input for a 32.768 kHz crystal (optimized for 6-9 pF load), also the external clock input when configured for an external oscillator.
2 X2 output Quartz crystal output for the 32.768 kHz crystal; leave floating when using an external clock on X1.
3 VBAT power_in Battery backup supply input (1.3V to 3.6V) maintaining RTCC and SRAM when VCC is unavailable; connect to VSS if unused.
4 CS input Chip select input, active low selects the device and high deselects it, placing SO in high impedance.
5 VSS power_in Ground.
6 SI input Serial data input receiving instructions, addresses and data, latched on the rising edge of SCK.
7 SO tri_state Serial data output shifted out after the falling edge of SCK, high-impedance when CS is deselected.
8 SCK input Serial clock input synchronizing SPI communication, up to 5 MHz.
9 MFP bidirectional Multifunction pin shared by clock output and alarms; requires an external pull-up to VCC or VBAT and has a maximum sink current of 10 mA.
10 VCC power_in Primary power supply, operating range 1.8V to 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category RTC/Clock Chip
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
All inputs and outputs w.r.t. VSS (lower limit; upper limit VCC+1.0V) -0.6 V -0.6V to VCC+1.0V 4
Storage temperature -65 150 °C 4
Ambient temperature under bias -40 85 °C 4
ESD protection on all pins 4 kV 4
Operating supply voltage VCC 1.8 3.6 V Industrial (I) 4
Operating temperature TA -40 85 °C Industrial (I) 4
Low-Level Input Voltage (min; max is 0.3VCC / 0.2VCC) VIL -0.3 V VCC ≥ 2.5V and VCC < 2.5V 4
Low-Level Output Voltage VOL 0.4 V IOL = 2.1 mA, VCC ≥ 2.5V 4
Low-Level Output Voltage VOL 0.2 V IOL = 1.0 mA, VCC < 2.5V 4
Input Leakage Current ILI -1 1 µA CS = VCC, VIN = VSS or VCC 4
Output Leakage Current ILO -1 1 µA CS = VCC, VOUT = VSS or VCC 4
Pin Capacitance (all inputs and outputs) CINT 7 pF VCC = 3.6V (Note 2), TA = +25°C, f = 1 MHz 4
EEPROM read operating current ICCEERD 3 mA VCC = 3.6V, FCLK = 5 MHz, SO = Open 4
EEPROM write operating current ICCEEWR 5 mA VCC = 3.6V 4
SRAM/RTCC read operating current ICCREAD 3 mA VCC = 3.6V, FCLK = 5 MHz, SO = Open 4
SRAM/RTCC write operating current ICCWRITE 3 mA VCC = 3.6V, FCLK = 5 MHz 4
VCC Data Retention Current (oscillator off) ICCDAT 1 µA VCC = 3.6V 4
Timekeeping Current ICCT 1.2 µA VCC = 1.8V, CS = VCC, (Note 2) 4
Timekeeping Current ICCT 1.2 1.8 µA VCC = 3.0V, CS = VCC, (Note 2) 4
Timekeeping Current ICCT 2.6 µA VCC = 3.6V, CS = VCC, (Note 2) 4
Power-Fail Switchover Voltage VTRIP 1.3 1.5 1.7 V 5
Backup Supply Voltage Range VBAT 1.3 3.6 V 5
Timekeeping Backup Current IBATT 850 nA VBAT = 1.3V, VCC = VSS (Note 2) 5
Timekeeping Backup Current IBATT 1000 1200 nA VBAT = 3.0V, VCC = VSS (Note 2) 5
Timekeeping Backup Current IBATT 2300 nA VBAT = 3.6V, VCC = VSS (Note 2) 5
VBAT Data Retention Current (oscillator off) IBATDAT 850 nA VBAT = 3.6V, VCC = VSS 5
Clock Frequency FCLK 5 MHz 2.5V ≤ Vcc < 3.6V 6
Clock Frequency FCLK 3 MHz 1.8V ≤ Vcc < 2.5V 6
CS Setup Time TCSS 100 ns 2.5V ≤ Vcc < 3.6V 6
CS Setup Time TCSS 150 ns 1.8V ≤ Vcc < 2.5V 6
CS Hold Time TCSH 100 ns 2.5V ≤ Vcc < 3.6V 6
CS Hold Time TCSH 150 ns 1.8V ≤ Vcc < 2.5V 6
Data Setup Time TSU 20 ns 2.5V ≤ Vcc < 3.6V 6
Data Setup Time TSU 30 ns 1.8V ≤ Vcc < 2.5V 6
Data Hold Time THD 40 ns 2.5V ≤ Vcc < 3.6V 6
Data Hold Time THD 50 ns 1.8V ≤ Vcc < 2.5V 6
Clock High Time THI 100 ns 2.5V ≤ Vcc < 3.6V 6
Clock High Time THI 150 ns 1.8V ≤ Vcc < 2.5V 6
Clock Low Time TLO 100 ns 2.5V ≤ Vcc < 3.6V 6
Clock Low Time TLO 150 ns 1.8V ≤ Vcc < 2.5V 6
Output Valid from Clock Low TV 100 ns 2.5V ≤ Vcc < 3.6V 6
Output Valid from Clock Low TV 160 ns 1.8V ≤ Vcc < 2.5V 6
Output Disable Time TDIS 80 ns 2.5V ≤ Vcc < 3.6V (Note 1) 6
Output Disable Time TDIS 160 ns 1.8V ≤ Vcc < 2.5V (Note 1) 6
Internal Write Cycle Time TWC 5 ms Note 2 6
VCC Fall Time TFVCC 300 µs Note 1 6
Oscillator Pin Capacitance (X1, X2 pins) COSC 3 pF Note 2 4
Oscillator Frequency FOSC 32.768 kHz 6

CAD (KiCad official)

  • Symbol: MCP79520T-I
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp79520t-i-etched.step / mcp79520t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp79520t-i.step / mcp79520t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 1caaeadd97693b59, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF