main
History Download
Ray Publish 0.1.0 cd0ca98

MCP79411-I

Microchip Tech · Real-time Clocks (RTC) · MSOP-8

MCP79411-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Quartz crystal input for the 32.768 kHz crystal (optimized for 6-9 pF load capacitance), also the external clock input when EXTOSC is set.
2 X2 output Quartz crystal output for the 32.768 kHz crystal; leave floating when using an external clock input on X1.
3 VBAT power_in Battery backup supply input maintaining RTCC and SRAM registers when VCC is unavailable (1.3V to 5.5V); connect to VSS if unused.
4 VSS power_in Ground.
5 SDA bidirectional I2C bidirectional serial data, open-drain, requires a pull-up to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz).
6 SCL input I2C serial clock input used to synchronize data transfer to and from the device (up to 400 kHz).
7 MFP output Open-drain multifunction output for alarm, square wave or general purpose output (OUT bit); needs a pull-up to VCC (typically 10 kΩ) and may be left floating if unused.
8 VCC power_in Primary power supply, operating voltage range 1.8V to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Clock and Timing
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-Level Input Voltage VIH 0.7 V min is 0.7 VCC 3
Low-Level Input Voltage VIL 0.3 V VCC ≥ 2.5V; max is 0.3 VCC 3
Low-Level Input Voltage VIL 0.2 V VCC < 2.5V; max is 0.2 VCC 3
Hysteresis of Schmitt Trigger Inputs (SDA, SCL) VHYS 0.05 V Note 1; min is 0.05 VCC 3
Low-Level Output Voltage (MFP, SDA) VOL 0.4 V IOL = 3.0 mA; VCC = 4.5V 3
Input Leakage Current ILI -1 1 µA VIN = VSS or VCC 3
Output Leakage Current ILO -1 1 µA VOUT = VSS or VCC 3
Pin Capacitance (SDA, SCL, MFP) CIN, COUT 10 pF VCC = 5.0V (Note 1); TA = 25°C, f = 1 MHz 3
Oscillator Pin Capacitance (X1, X2) COSC 3 pF Note 1 3
EEPROM Operating Current (read) ICCEERD 400 µA VCC = 5.5V, SCL = 400 kHz 3
EEPROM Operating Current (write) ICCEEWR 3 mA VCC = 5.5V 3
SRAM/RTCC Register Operating Current (read) ICCREAD 300 µA VCC = 5.5V, SCL = 400 kHz 3
SRAM/RTCC Register Operating Current (write) ICCWRITE 400 µA VCC = 5.5V, SCL = 400 kHz 3
VCC Data-Retention Current (oscillator off) ICCDAT 1 µA SCL, SDA, VCC = 5.5V 3
Timekeeping Current ICCT 1.2 µA VCC = 3.3V (Note 1) 3
Power-Fail Switchover Voltage VTRIP 1.3 1.5 1.7 V 3
Backup Supply Voltage Range VBAT 1.3 5.5 V Note 1 3
Timekeeping Backup Current IBATT 850 nA VBAT = 1.3V, VCC = VSS (Note 1) 4
Timekeeping Backup Current IBATT 925 1200 nA VBAT = 3.0V, VCC = VSS (Note 1) 4
Timekeeping Backup Current IBATT 9000 nA VBAT = 5.5V, VCC = VSS (Note 1) 4
VBAT Data Retention Current (oscillator off) IBATDAT 750 nA VBAT = 3.6V, VCC = VSS 4
Clock Frequency FCLK 100 kHz 1.8V ≤ VCC < 2.5V 5
Clock Frequency FCLK 400 kHz 2.5V ≤ VCC ≤ 5.5V 5
Clock High Time THIGH 4000 ns 1.8V ≤ VCC < 2.5V 5
Clock High Time THIGH 600 ns 2.5V ≤ VCC ≤ 5.5V 5
Clock Low Time TLOW 4700 ns 1.8V ≤ VCC < 2.5V 5
Clock Low Time TLOW 1300 ns 2.5V ≤ VCC ≤ 5.5V 5
SDA and SCL Rise Time TR 1000 ns 1.8V ≤ VCC < 2.5V (Note 1) 5
SDA and SCL Rise Time TR 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 5
SDA and SCL Fall Time TF 1000 ns 1.8V ≤ VCC < 2.5V (Note 1) 5
SDA and SCL Fall Time TF 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 5
Start Condition Hold Time THD:STA 4000 ns 1.8V ≤ VCC < 2.5V 5
Start Condition Hold Time THD:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 5
Start Condition Setup Time TSU:STA 4700 ns 1.8V ≤ VCC < 2.5V 5
Start Condition Setup Time TSU:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 5
Data Input Hold Time THD:DAT 0 ns Note 3 5
Data Input Setup Time TSU:DAT 250 ns 1.8V ≤ VCC < 2.5V 5
Data Input Setup Time TSU:DAT 100 ns 2.5V ≤ VCC ≤ 5.5V 5
Stop Condition Setup Time TSU:STO 4000 ns 1.8V ≤ VCC < 2.5V 5
Stop Condition Setup Time TSU:STO 600 ns 2.5V ≤ VCC ≤ 5.5V 5
Output Valid from Clock TAA 3500 ns 1.8V ≤ VCC < 2.5V 5
Output Valid from Clock TAA 900 ns 2.5V ≤ VCC ≤ 5.5V 5
Bus Free Time TBUF 4700 ns 1.8V ≤ VCC < 2.5V 5
Bus Free Time TBUF 1300 ns 2.5V ≤ VCC ≤ 5.5V 5
Input Filter Spike Suppression (SDA and SCL) TSP 50 ns Note 1 5
Write Cycle Time (byte or page) TWC 5 ms 5
VCC Fall Time TFVCC 300 µs Note 1 5
VCC Rise Time TRVCC 0 µs Note 1 5
Oscillator Frequency FOSC 32.768 kHz 5
Oscillator Timeout Period TOSF 1 ms Note 1 5
Supply Voltage (VCC) VCC 6.5 V 3
All inputs and outputs (except SDA and SCL) w.r.t. VSS -0.6 V -0.6V to VCC +1.0V (max is VCC + 1.0V) 3
SDA and SCL w.r.t. VSS -0.6 6.5 V 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 125 °C 3
ESD protection on all pins 4 kV ≥4 kV 3
Operating supply voltage VCC 1.8 5.5 V Industrial (I) 3
Operating ambient temperature TA -40 85 °C Industrial (I) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 47

CAD (KiCad official)

  • Symbol: MCP79411-I
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp79411-i-etched.step / mcp79411-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp79411-i.step / mcp79411-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (66 pp, sha256 f1ef80f6df311f90, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF