Generated by kicad-footprint-generator · KiCad file format 20260206
MCP79411-I
Microchip Tech · Real-time Clocks (RTC) · MSOP-8
MCP79411-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Quartz crystal input for the 32.768 kHz crystal (optimized for 6-9 pF load capacitance), also the external clock input when EXTOSC is set. |
| 2 | X2 | output | Quartz crystal output for the 32.768 kHz crystal; leave floating when using an external clock input on X1. |
| 3 | VBAT | power_in | Battery backup supply input maintaining RTCC and SRAM registers when VCC is unavailable (1.3V to 5.5V); connect to VSS if unused. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | I2C bidirectional serial data, open-drain, requires a pull-up to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 6 | SCL | input | I2C serial clock input used to synchronize data transfer to and from the device (up to 400 kHz). |
| 7 | MFP | output | Open-drain multifunction output for alarm, square wave or general purpose output (OUT bit); needs a pull-up to VCC (typically 10 kΩ) and may be left floating if unused. |
| 8 | VCC | power_in | Primary power supply, operating voltage range 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Clock and Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Level Input Voltage | VIH | 0.7 | V | min is 0.7 VCC | 3 | ||
| Low-Level Input Voltage | VIL | 0.3 | V | VCC ≥ 2.5V; max is 0.3 VCC | 3 | ||
| Low-Level Input Voltage | VIL | 0.2 | V | VCC < 2.5V; max is 0.2 VCC | 3 | ||
| Hysteresis of Schmitt Trigger Inputs (SDA, SCL) | VHYS | 0.05 | V | Note 1; min is 0.05 VCC | 3 | ||
| Low-Level Output Voltage (MFP, SDA) | VOL | 0.4 | V | IOL = 3.0 mA; VCC = 4.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (SDA, SCL, MFP) | CIN, COUT | 10 | pF | VCC = 5.0V (Note 1); TA = 25°C, f = 1 MHz | 3 | ||
| Oscillator Pin Capacitance (X1, X2) | COSC | 3 | pF | Note 1 | 3 | ||
| EEPROM Operating Current (read) | ICCEERD | 400 | µA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| EEPROM Operating Current (write) | ICCEEWR | 3 | mA | VCC = 5.5V | 3 | ||
| SRAM/RTCC Register Operating Current (read) | ICCREAD | 300 | µA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| SRAM/RTCC Register Operating Current (write) | ICCWRITE | 400 | µA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| VCC Data-Retention Current (oscillator off) | ICCDAT | 1 | µA | SCL, SDA, VCC = 5.5V | 3 | ||
| Timekeeping Current | ICCT | 1.2 | µA | VCC = 3.3V (Note 1) | 3 | ||
| Power-Fail Switchover Voltage | VTRIP | 1.3 | 1.5 | 1.7 | V | 3 | |
| Backup Supply Voltage Range | VBAT | 1.3 | 5.5 | V | Note 1 | 3 | |
| Timekeeping Backup Current | IBATT | 850 | nA | VBAT = 1.3V, VCC = VSS (Note 1) | 4 | ||
| Timekeeping Backup Current | IBATT | 925 | 1200 | nA | VBAT = 3.0V, VCC = VSS (Note 1) | 4 | |
| Timekeeping Backup Current | IBATT | 9000 | nA | VBAT = 5.5V, VCC = VSS (Note 1) | 4 | ||
| VBAT Data Retention Current (oscillator off) | IBATDAT | 750 | nA | VBAT = 3.6V, VCC = VSS | 4 | ||
| Clock Frequency | FCLK | 100 | kHz | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock Frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Clock High Time | THIGH | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Clock Low Time | TLOW | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| SDA and SCL Rise Time | TR | 1000 | ns | 1.8V ≤ VCC < 2.5V (Note 1) | 5 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| SDA and SCL Fall Time | TF | 1000 | ns | 1.8V ≤ VCC < 2.5V (Note 1) | 5 | ||
| SDA and SCL Fall Time | TF | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| Start Condition Hold Time | THD:STA | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Start Condition Setup Time | TSU:STA | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 3 | 5 | ||
| Data Input Setup Time | TSU:DAT | 250 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Stop Condition Setup Time | TSU:STO | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Output Valid from Clock | TAA | 3500 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Output Valid from Clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Bus Free Time | TBUF | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Input Filter Spike Suppression (SDA and SCL) | TSP | 50 | ns | Note 1 | 5 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | 5 | |||
| VCC Fall Time | TFVCC | 300 | µs | Note 1 | 5 | ||
| VCC Rise Time | TRVCC | 0 | µs | Note 1 | 5 | ||
| Oscillator Frequency | FOSC | 32.768 | kHz | 5 | |||
| Oscillator Timeout Period | TOSF | 1 | ms | Note 1 | 5 | ||
| Supply Voltage (VCC) | VCC | 6.5 | V | 3 | |||
| All inputs and outputs (except SDA and SCL) w.r.t. VSS | -0.6 | V | -0.6V to VCC +1.0V (max is VCC + 1.0V) | 3 | |||
| SDA and SCL w.r.t. VSS | -0.6 | 6.5 | V | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | ≥4 kV | 3 | |||
| Operating supply voltage | VCC | 1.8 | 5.5 | V | Industrial (I) | 3 | |
| Operating ambient temperature | TA | -40 | 85 | °C | Industrial (I) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 47 |
CAD (KiCad official)
- Symbol:
MCP79411-I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp79411-i-etched.step/mcp79411-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp79411-i.step/mcp79411-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (66 pp, sha256
f1ef80f6df311f90, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).