main
Ray
Publish 0.1.0
07246e5
MCP73834-FCI
Microchip Tech · Battery Management ICs · DFN-10(3x3)
MCP73834-FCI from Microchip Tech, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF. |
| 2 | VDD | power_in | Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF. |
| 3 | STAT1 | output | Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller. |
| 4 | STAT2 | output | Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller. |
| 5 | VSS | power_in | Battery management 0V reference; connect to negative terminal of battery and input supply. |
| 6 | PROG | passive | Current regulation set: a resistor to VSS scales preconditioning, fast charge and termination currents; floating the pin disables the charger. |
| 7 | TE | input | Timer enable input on MCP73834: low enables the internal timer, high disables it, compatible with 1.8V logic. |
| 8 | THERM | passive | Thermistor input with internal 50 µA bias source, compared to typical thresholds of 1.20V and 0.25V. |
| 9 | VBAT | power_out | Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF. |
| 10 | VBAT | power_out | Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF. |
| 11 | EP | power_in | Exposed thermal pad internally connected to VSS and must be connected to the same potential as VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-10(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (charging) | VDD | 3.75 | 6 | V | Charging | 3 | |
| Supply Current, charging | ISS | 2000 | 3000 | µA | Charging | 3 | |
| Supply Current, charge complete | ISS | 150 | 300 | µA | Charge Complete | 3 | |
| Supply Current, standby | ISS | 100 | 300 | µA | Standby (No Battery or PROG Floating) | 3 | |
| Supply Current, shutdown | ISS | 50 | 100 | µA | Shutdown (VDD < VBAT, or VDD < VSTOP) | 3 | |
| UVLO Start Threshold | VSTART | 3.4 | 3.55 | 3.7 | V | VDD Low-to-High | 3 |
| UVLO Stop Threshold | VSTOP | 3.3 | 3.45 | 3.6 | V | VDD High-to-Low | 3 |
| Regulated Output Voltage (4.20 V option) | VREG | 4.168 | 4.2 | 4.232 | V | VDD=[VREG(Typical)+1V], IOUT=10 mA, TA=-5°C to +55°C | 3 |
| Line Regulation | /(ΔVBAT/VBAT)/ΔVDD/ | 0.1 | 0.3 | %/V | VDD=[VREG(Typical)+1V] to 6V, IOUT=10 mA | 3 | |
| Load Regulation | /ΔVBAT/VBAT/ | 0.1 | 0.3 | % | IOUT=10 mA to 100 mA, VDD=[VREG(Typical)+1V] | 3 | |
| Fast Charge Current Regulation (10 kΩ) | IREG | 90 | 100 | 110 | mA | PROG = 10 kΩ | 3 |
| Fast Charge Current Regulation (1.0 kΩ) | IREG | 900 | 1000 | 1100 | mA | PROG = 1.0 kΩ, TA=-5°C to +55°C | 3 |
| Output Reverse Leakage Current, PROG floating | IDISCHARGE | 0.15 | 2 | µA | PROG Floating | 4 | |
| Output Reverse Leakage Current, VDD<VBAT | IDISCHARGE | 0.25 | 2 | µA | VDD < VBAT | 4 | |
| Output Reverse Leakage Current, VDD<VSTOP | IDISCHARGE | 0.15 | 2 | µA | VDD < VSTOP | 4 | |
| Output Reverse Leakage Current, charge complete | IDISCHARGE | -5.5 | -15 | µA | Charge Complete | 4 | |
| Status Sink Current | ISINK | 15 | 25 | mA | 4 | ||
| Status Low Output Voltage | VOL | 0.4 | 1 | V | ISINK = 4 mA | 4 | |
| Status Input Leakage Current | ILK | 0.01 | 1 | µA | High Impedance, 6V on pin | 4 | |
| Charge Impedance Range | RPROG | 1 | 20 | kΩ | 4 | ||
| Standby Impedance | RPROG | 70 | 200 | kΩ | Minimum Impedance for Standby | 4 | |
| Thermistor Current Source | ITHERM | 47 | 50 | 53 | µA | 2 kΩ < RTHERM < 50 kΩ | 4 |
| Upper Trip Threshold | VT1 | 1.2 | 1.23 | 1.26 | V | VTHERM Low-to-High | 4 |
| Lower Trip Threshold | VT2 | 0.235 | 0.25 | 0.265 | V | VTHERM High-to-Low | 4 |
| THERM Input Sink Current | ISINK | 3 | 6 | 20 | µA | Stand-by or system test mode | 4 |
| Bypass Capacitance (IOUT<250 mA) | CBAT | 1 | µF | IOUT < 250 mA | 4 | ||
| Bypass Capacitance (IOUT>250 mA) | CBAT | 4.7 | µF | IOUT > 250 mA | 4 | ||
| Timer Enable Input High Voltage | VIH | 2 | V | 5 | |||
| Timer Enable Input Low Voltage | VIL | 0.6 | V | 5 | |||
| Timer Enable Input Leakage Current | ILK | 0.01 | 1 | µA | VTE = 6V | 5 | |
| UVLO Start Delay | tSTART | 5 | ms | VDD Low-to-High | 5 | ||
| Transition Time Out of Preconditioning | tDELAY | 1 | ms | VBATVPTH | 5 | ||
| Current Rise Time Out of Preconditioning | tRISE | 1 | ms | IOUT Rising to 90% of IREG | 5 | ||
| Preconditioning Comparator Filter Time | tPRECON | 0.4 | 1.3 | 3.2 | ms | Average VBAT Rise/Fall | 5 |
| Termination Comparator Filter Time | tTERM | 0.4 | 1.3 | 3.2 | ms | Average IOUT Falling | 5 |
| Charge Comparator Filter Time | tCHARGE | 0.4 | 1.3 | 3.2 | ms | Average VBAT Falling | 5 |
| Thermistor Comparator Filter Time | tTHERM | 0.4 | 1.3 | 3.2 | ms | Average THERM Rise/Fall | 5 |
| Status Output turn-off | tOFF | 200 | µs | ISINK = 1 mA to 0 mA | 5 | ||
| Status Output turn-on | tON | 200 | µs | ISINK = 0 mA to 1 mA | 5 | ||
| Specified Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Supply Voltage | VDD | 7 | V | 3 | |||
| All Inputs and Outputs w.r.t. VSS | -0.3 | V | Upper limit (VDD+0.3)V | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| ESD HBM | 4 | kV | 1.5 kΩ in series with 100 pF, all pins | 3 | |||
| Maximum Output Current Limit | IMAX | 1200 | mA | PROG < 833Ω | 3 | ||
| Thermal Shutdown Die Temperature | TSD | 150 | °C | 5 | |||
| Thermal Resistance, DFN-10 3 mm x 3 mm | θJA | 41 | °C/W | 4-Layer JC51-7 Standard Board, Natural Convection | 5 |
CAD (KiCad official)
- Symbol:
MCP73834-FCI - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
mcp73834-fci-etched.step/mcp73834-fci-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp73834-fci.step/mcp73834-fci.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
70b297a13b77cebf, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP73834-FCI
**Microchip Tech** · Battery Management ICs · DFN-10(3x3)
MCP73834-FCI from Microchip Tech, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF. |
| 2 | VDD | power_in | Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF. |
| 3 | STAT1 | output | Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller. |
| 4 | STAT2 | output | Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller. |
| 5 | VSS | power_in | Battery management 0V reference; connect to negative terminal of battery and input supply. |
| 6 | PROG | passive | Current regulation set: a resistor to VSS scales preconditioning, fast charge and termination currents; floating the pin disables the charger. |
| 7 | TE | input | Timer enable input on MCP73834: low enables the internal timer, high disables it, compatible with 1.8V logic. |
| 8 | THERM | passive | Thermistor input with internal 50 µA bias source, compared to typical thresholds of 1.20V and 0.25V. |
| 9 | VBAT | power_out | Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF. |
| 10 | VBAT | power_out | Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF. |
| 11 | EP | power_in | Exposed thermal pad internally connected to VSS and must be connected to the same potential as VSS. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-10(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (charging) | VDD | 3.75 | | 6 | V | Charging | 3 |
| Supply Current, charging | ISS | | 2000 | 3000 | µA | Charging | 3 |
| Supply Current, charge complete | ISS | | 150 | 300 | µA | Charge Complete | 3 |
| Supply Current, standby | ISS | | 100 | 300 | µA | Standby (No Battery or PROG Floating) | 3 |
| Supply Current, shutdown | ISS | | 50 | 100 | µA | Shutdown (VDD < VBAT, or VDD < VSTOP) | 3 |
| UVLO Start Threshold | VSTART | 3.4 | 3.55 | 3.7 | V | VDD Low-to-High | 3 |
| UVLO Stop Threshold | VSTOP | 3.3 | 3.45 | 3.6 | V | VDD High-to-Low | 3 |
| Regulated Output Voltage (4.20 V option) | VREG | 4.168 | 4.2 | 4.232 | V | VDD=[VREG(Typical)+1V], IOUT=10 mA, TA=-5°C to +55°C | 3 |
| Line Regulation | /(ΔVBAT/VBAT)/ΔVDD/ | | 0.1 | 0.3 | %/V | VDD=[VREG(Typical)+1V] to 6V, IOUT=10 mA | 3 |
| Load Regulation | /ΔVBAT/VBAT/ | | 0.1 | 0.3 | % | IOUT=10 mA to 100 mA, VDD=[VREG(Typical)+1V] | 3 |
| Fast Charge Current Regulation (10 kΩ) | IREG | 90 | 100 | 110 | mA | PROG = 10 kΩ | 3 |
| Fast Charge Current Regulation (1.0 kΩ) | IREG | 900 | 1000 | 1100 | mA | PROG = 1.0 kΩ, TA=-5°C to +55°C | 3 |
| Output Reverse Leakage Current, PROG floating | IDISCHARGE | | 0.15 | 2 | µA | PROG Floating | 4 |
| Output Reverse Leakage Current, VDD<VBAT | IDISCHARGE | | 0.25 | 2 | µA | VDD < VBAT | 4 |
| Output Reverse Leakage Current, VDD<VSTOP | IDISCHARGE | | 0.15 | 2 | µA | VDD < VSTOP | 4 |
| Output Reverse Leakage Current, charge complete | IDISCHARGE | | -5.5 | -15 | µA | Charge Complete | 4 |
| Status Sink Current | ISINK | | 15 | 25 | mA | | 4 |
| Status Low Output Voltage | VOL | | 0.4 | 1 | V | ISINK = 4 mA | 4 |
| Status Input Leakage Current | ILK | | 0.01 | 1 | µA | High Impedance, 6V on pin | 4 |
| Charge Impedance Range | RPROG | 1 | | 20 | kΩ | | 4 |
| Standby Impedance | RPROG | 70 | | 200 | kΩ | Minimum Impedance for Standby | 4 |
| Thermistor Current Source | ITHERM | 47 | 50 | 53 | µA | 2 kΩ < RTHERM < 50 kΩ | 4 |
| Upper Trip Threshold | VT1 | 1.2 | 1.23 | 1.26 | V | VTHERM Low-to-High | 4 |
| Lower Trip Threshold | VT2 | 0.235 | 0.25 | 0.265 | V | VTHERM High-to-Low | 4 |
| THERM Input Sink Current | ISINK | 3 | 6 | 20 | µA | Stand-by or system test mode | 4 |
| Bypass Capacitance (IOUT<250 mA) | CBAT | 1 | | | µF | IOUT < 250 mA | 4 |
| Bypass Capacitance (IOUT>250 mA) | CBAT | 4.7 | | | µF | IOUT > 250 mA | 4 |
| Timer Enable Input High Voltage | VIH | 2 | | | V | | 5 |
| Timer Enable Input Low Voltage | VIL | | | 0.6 | V | | 5 |
| Timer Enable Input Leakage Current | ILK | | 0.01 | 1 | µA | VTE = 6V | 5 |
| UVLO Start Delay | tSTART | | | 5 | ms | VDD Low-to-High | 5 |
| Transition Time Out of Preconditioning | tDELAY | | | 1 | ms | VBAT<VPTH to VBAT>VPTH | 5 |
| Current Rise Time Out of Preconditioning | tRISE | | | 1 | ms | IOUT Rising to 90% of IREG | 5 |
| Preconditioning Comparator Filter Time | tPRECON | 0.4 | 1.3 | 3.2 | ms | Average VBAT Rise/Fall | 5 |
| Termination Comparator Filter Time | tTERM | 0.4 | 1.3 | 3.2 | ms | Average IOUT Falling | 5 |
| Charge Comparator Filter Time | tCHARGE | 0.4 | 1.3 | 3.2 | ms | Average VBAT Falling | 5 |
| Thermistor Comparator Filter Time | tTHERM | 0.4 | 1.3 | 3.2 | ms | Average THERM Rise/Fall | 5 |
| Status Output turn-off | tOFF | | | 200 | µs | ISINK = 1 mA to 0 mA | 5 |
| Status Output turn-on | tON | | | 200 | µs | ISINK = 0 mA to 1 mA | 5 |
| Specified Temperature Range | TA | -40 | | 85 | °C | | 5 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 5 |
| Supply Voltage | VDD | | | 7 | V | | 3 |
| All Inputs and Outputs w.r.t. VSS | | -0.3 | | | V | Upper limit (VDD+0.3)V | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| ESD HBM | | 4 | | | kV | 1.5 kΩ in series with 100 pF, all pins | 3 |
| Maximum Output Current Limit | IMAX | | 1200 | | mA | PROG < 833Ω | 3 |
| Thermal Shutdown Die Temperature | TSD | | 150 | | °C | | 5 |
| Thermal Resistance, DFN-10 3 mm x 3 mm | θJA | | 41 | | °C/W | 4-Layer JC51-7 Standard Board, Natural Convection | 5 |
## CAD (KiCad official)
- Symbol: `MCP73834-FCI`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files: `mcp73834-fci-etched.step` / `mcp73834-fci-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp73834-fci.step` / `mcp73834-fci.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp73834-fci-datasheet.pdf) (32 pp, sha256 `70b297a13b77cebf`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp73834-fci-datasheet.pdf)