main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp73834-fci: viewers · Ray
mcp73834-fci-etched.glb Publish 0.1.0 · Ray
mcp73834-fci-etched.step mcp73834-fci: factory component page (tier=mfr) · Ray
mcp73834-fci-hero.glb mcp73834-fci: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp73834-fci-hero.overlay.json Publish 0.1.0 · Ray
mcp73834-fci.glb Publish 0.1.0 · Ray
mcp73834-fci.kicad_mod Publish 0.1.0 · Ray
mcp73834-fci.kicad_sym Publish 0.1.0 · Ray
mcp73834-fci.lbr Publish 0.1.0 · Ray
mcp73834-fci.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP73834-FCI

Microchip Tech · Battery Management ICs · DFN-10(3x3)

MCP73834-FCI from Microchip Tech, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF.
2 VDD power_in Battery management input supply; recommended VREG(typ)+0.3V to 6V, bypass to VSS with at least 1 µF.
3 STAT1 output Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller.
4 STAT2 output Open-drain charge status output for driving an LED or a pull-up resistor to a host microcontroller.
5 VSS power_in Battery management 0V reference; connect to negative terminal of battery and input supply.
6 PROG passive Current regulation set: a resistor to VSS scales preconditioning, fast charge and termination currents; floating the pin disables the charger.
7 TE input Timer enable input on MCP73834: low enables the internal timer, high disables it, compatible with 1.8V logic.
8 THERM passive Thermistor input with internal 50 µA bias source, compared to typical thresholds of 1.20V and 0.25V.
9 VBAT power_out Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF.
10 VBAT power_out Battery charge control output to battery positive terminal (drain of internal P-channel pass MOSFET); bypass to VSS with at least 1 µF.
11 EP power_in Exposed thermal pad internally connected to VSS and must be connected to the same potential as VSS.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-10(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (charging) VDD 3.75 6 V Charging 3
Supply Current, charging ISS 2000 3000 µA Charging 3
Supply Current, charge complete ISS 150 300 µA Charge Complete 3
Supply Current, standby ISS 100 300 µA Standby (No Battery or PROG Floating) 3
Supply Current, shutdown ISS 50 100 µA Shutdown (VDD < VBAT, or VDD < VSTOP) 3
UVLO Start Threshold VSTART 3.4 3.55 3.7 V VDD Low-to-High 3
UVLO Stop Threshold VSTOP 3.3 3.45 3.6 V VDD High-to-Low 3
Regulated Output Voltage (4.20 V option) VREG 4.168 4.2 4.232 V VDD=[VREG(Typical)+1V], IOUT=10 mA, TA=-5°C to +55°C 3
Line Regulation /(ΔVBAT/VBAT)/ΔVDD/ 0.1 0.3 %/V VDD=[VREG(Typical)+1V] to 6V, IOUT=10 mA 3
Load Regulation /ΔVBAT/VBAT/ 0.1 0.3 % IOUT=10 mA to 100 mA, VDD=[VREG(Typical)+1V] 3
Fast Charge Current Regulation (10 kΩ) IREG 90 100 110 mA PROG = 10 kΩ 3
Fast Charge Current Regulation (1.0 kΩ) IREG 900 1000 1100 mA PROG = 1.0 kΩ, TA=-5°C to +55°C 3
Output Reverse Leakage Current, PROG floating IDISCHARGE 0.15 2 µA PROG Floating 4
Output Reverse Leakage Current, VDD<VBAT IDISCHARGE 0.25 2 µA VDD < VBAT 4
Output Reverse Leakage Current, VDD<VSTOP IDISCHARGE 0.15 2 µA VDD < VSTOP 4
Output Reverse Leakage Current, charge complete IDISCHARGE -5.5 -15 µA Charge Complete 4
Status Sink Current ISINK 15 25 mA 4
Status Low Output Voltage VOL 0.4 1 V ISINK = 4 mA 4
Status Input Leakage Current ILK 0.01 1 µA High Impedance, 6V on pin 4
Charge Impedance Range RPROG 1 20 kΩ 4
Standby Impedance RPROG 70 200 kΩ Minimum Impedance for Standby 4
Thermistor Current Source ITHERM 47 50 53 µA 2 kΩ < RTHERM < 50 kΩ 4
Upper Trip Threshold VT1 1.2 1.23 1.26 V VTHERM Low-to-High 4
Lower Trip Threshold VT2 0.235 0.25 0.265 V VTHERM High-to-Low 4
THERM Input Sink Current ISINK 3 6 20 µA Stand-by or system test mode 4
Bypass Capacitance (IOUT<250 mA) CBAT 1 µF IOUT < 250 mA 4
Bypass Capacitance (IOUT>250 mA) CBAT 4.7 µF IOUT > 250 mA 4
Timer Enable Input High Voltage VIH 2 V 5
Timer Enable Input Low Voltage VIL 0.6 V 5
Timer Enable Input Leakage Current ILK 0.01 1 µA VTE = 6V 5
UVLO Start Delay tSTART 5 ms VDD Low-to-High 5
Transition Time Out of Preconditioning tDELAY 1 ms VBATVPTH 5
Current Rise Time Out of Preconditioning tRISE 1 ms IOUT Rising to 90% of IREG 5
Preconditioning Comparator Filter Time tPRECON 0.4 1.3 3.2 ms Average VBAT Rise/Fall 5
Termination Comparator Filter Time tTERM 0.4 1.3 3.2 ms Average IOUT Falling 5
Charge Comparator Filter Time tCHARGE 0.4 1.3 3.2 ms Average VBAT Falling 5
Thermistor Comparator Filter Time tTHERM 0.4 1.3 3.2 ms Average THERM Rise/Fall 5
Status Output turn-off tOFF 200 µs ISINK = 1 mA to 0 mA 5
Status Output turn-on tON 200 µs ISINK = 0 mA to 1 mA 5
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C 5
Supply Voltage VDD 7 V 3
All Inputs and Outputs w.r.t. VSS -0.3 V Upper limit (VDD+0.3)V 3
Storage Temperature -65 150 °C 3
ESD HBM 4 kV 1.5 kΩ in series with 100 pF, all pins 3
Maximum Output Current Limit IMAX 1200 mA PROG < 833Ω 3
Thermal Shutdown Die Temperature TSD 150 °C 5
Thermal Resistance, DFN-10 3 mm x 3 mm θJA 41 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 5

CAD (KiCad official)

  • Symbol: MCP73834-FCI
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: mcp73834-fci-etched.step / mcp73834-fci-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73834-fci.step / mcp73834-fci.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 70b297a13b77cebf, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF