component
MCP6V67-E
Public Made by Adomby adom
Microchip Tech Precision OpAmps, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6V67-E
Microchip Tech · Precision OpAmps · MSOP-8
MCP6V67-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Output of Op Amp A; the analog output pin is a low-impedance voltage source. |
| 2 | VINA- | input | Inverting input of Op Amp A; a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Noninverting input of Op Amp A; a high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply; VDD is 1.8V to 5.5V higher than VSS, and in single-supply use VSS is connected to ground. |
| 5 | VINB+ | input | Noninverting input of Op Amp B; a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of Op Amp B; a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Output of Op Amp B; the analog output pin is a low-impedance voltage source. |
| 8 | VDD | power_in | Positive power supply, 1.8V to 5.5V above VSS; VDD will need bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -25 | 25 | µV | TA = +25°C | 3 | |
| Input Offset Voltage Drift with Temperature (Linear Temp. Co.) | TC1 | -150 | 150 | nV/°C | TA = -40 to +125°C (Note 1: design guidance only; not tested) | 3 | |
| Power Supply Rejection Ratio | PSRR | 110 | 134 | dB | 3 | ||
| Input Bias Current | IB | -50 | 50 | pA | 3 | ||
| Input Bias Current across Temperature | IB | 0 | 0.2 | 1.5 | nA | TA = +125°C | 3 |
| Input Offset Current | IOS | -200 | 200 | pA | 3 | ||
| Input Offset Current across Temperature | IOS | -800 | 800 | pA | TA = +125°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 101 | 128 | dB | VDD = 1.8V, VCM = -0.2V to 2.1V | 4 | |
| Common Mode Rejection Ratio | CMRR | 111 | 134 | dB | VDD = 5.5V, VCM = -0.2V to 5.8V | 4 | |
| DC Open-Loop Gain (Large Signal) | AOL | 95 | 146 | dB | VDD = 1.8V, VOUT = 0.3V to 1.6V | 4 | |
| DC Open-Loop Gain (Large Signal) | AOL | 110 | 158 | dB | VDD = 5.5V, VOUT = 0.3V to 5.3V | 4 | |
| Supply Voltage | VDD | 1.8 | 5.5 | V | 4 | ||
| Quiescent Current per Amplifier | IQ | 40 | 80 | 130 | µA | IO = 0 | 4 |
| Power-on Reset (POR) Trip Voltage | VPOR | 0.9 | 1.6 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1: operation must not cause TJ to exceed +150°C | 5 | |
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| ESD protection on all pins (HBM) | 4 | kV | HBM, MCP6V67/9 | 3 | |||
| ESD protection on all pins (CDM) | 1.5 | kV | CDM, MCP6V67/9 | 3 | |||
| ESD protection on all pins (MM) | 300 | V | MM, MCP6V67/9 | 3 | |||
| Thermal Resistance, 8L-MSOP | JA | 211 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | Body, 14-lead, TSSOP *Y = Nickel palladium gold manufacturing designator. | 43 |
CAD (KiCad official)
- Symbol:
MCP6V67-E - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp6v67-e-etched.step/mcp6v67-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v67-e.step/mcp6v67-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
f8ffee619884d83d, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).