Generated by kicad-footprint-generator · KiCad file format 20260206
MCP6566UT-E
Microchip Tech · Comparators · SOT-23-5
MCP6566UT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Noninverting comparator input, a high-impedance CMOS input with low bias current and rail-to-rail operation from VSS - 0.3V to VDD + 0.3V. |
| 2 | VSS | power_in | Negative power supply, connected to ground in single-supply use, with VDD 1.8V to 5.5V above it. |
| 3 | VIN- | power_in | Inverting comparator input, a high-impedance CMOS input with low bias current and rail-to-rail operation from VSS - 0.3V to VDD + 0.3V. |
| 4 | OUT | output | Open-drain digital output that requires a pull-up resistor and supports pull-up voltages above and below VDD for level shifting and wired-OR. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 5.5V above VSS, with a 0.01 µF to 0.1 µF local bypass capacitor within 2 mm of the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current per Comparator | IQ | 60 | 100 | 130 | µA | IOUT = 0 | 3 |
| Power Supply Rejection Ratio | PSRR | 63 | 70 | dB | VCM = VSS | 3 | |
| Input Offset Voltage | VOS | -10 | 3 | 10 | mV | VCM = VSS (Note 1) | 3 |
| Input Bias Current | IB | 1500 | 5000 | pA | TA = +125°C, VIN- = VDD/2 | 3 | |
| Input Hysteresis Voltage | VHYST | 1 | 5 | mV | VCM = VSS (Notes 1, 2) | 3 | |
| Common-Mode Input Voltage Range low/high at 1.8V | VCMR | -0.2 | 2 | V | VDD = 1.8V (VSS, 0.2 to VDD + 0.2) | 3 | |
| Common-Mode Rejection Ratio | CMRR | 54 | 66 | dB | VCM = -0.3V to VDD + 0.3V, VDD = 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 50 | 63 | dB | VCM = VDD/2 to VDD + 0.3V, VDD = 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 54 | 65 | dB | VCM = -0.3V to VDD/2, VDD = 5.5V | 3 | |
| Pull-up Voltage | VPULL_UP | 1.6 | 5.5 | V | 4 | ||
| High-Level Output Current Leakage | IOH_leak | 1 | µA | Note 4 | 4 | ||
| Low-Level Output Voltage | VOL | 0.6 | V | IOUT = 3 mA/8 mA @ VDD = 1.8V/5.5V | 4 | ||
| Propagation Delay High-to-Low, 100 mV Overdrive | tPHL | 56 | 80 | ns | VCM = VDD/2, VDD = 1.8V (Note 2) | 4 | |
| Propagation Delay High-to-Low, 100 mV Overdrive | tPHL | 34 | 80 | ns | VCM = VDD/2, VDD = 5.5V | 4 | |
| Specified Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Open-Drain Output | 10.5 | V | VSS + 10.5V | 3 | |||
| Output Short-Circuit Current | -25 | 25 | mA | 3 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -50 | 50 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temperature with Power Applied | -40 | 125 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 201 | °C/W | 4 | |||
| Input Offset Drift | ΔVOS/ΔT | 2 | µV/°C | VCM = VSS | 3 | ||
| Input Offset Current | IOS | 1 | pA | VCM = VSS | 3 | ||
| Input Bias Current | IB | 1 | pA | TA = +25°C, VIN- = VDD/2 | 3 | ||
| Input Bias Current | IB | 60 | pA | TA = +85°C, VIN- = VDD/2 | 3 | ||
| Input Hysteresis Linear Temp. Co. | TC1 | 10 | µV/°C | 3 | |||
| Input Hysteresis Quadratic Temp. Co. | TC2 | 0.3 | µV/°C2 | 3 | |||
| Short-Circuit Current | ISC | 30 | mA | Not to exceed absolute max. rating (±30 typ) | 4 | ||
| Output Pin Capacitance | COUT | 8 | pF | 4 | |||
| Fall Time | tF | 20 | ns | 4 | |||
| Maximum Toggle Frequency | fTG | 4 | MHz | VDD = 5.5V | 4 | ||
| Maximum Toggle Frequency | fTG | 2 | MHz | VDD = 1.8V | 4 | ||
| Input Voltage Noise | ENI | 350 | µVP-P | 10 Hz to 10 MHz (Note 1) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 36 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP6566UT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp6566ut-e-ot-etched.step/mcp6566ut-e-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6566ut-e-ot.step/mcp6566ut-e-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
0bf95014310c37bc, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).