main
Ray
Publish 0.1.0
d52672c
MCP654-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-14
MCP654-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Output of op amp A; a low-impedance voltage source with rail-to-rail output. |
| 2 | VINA- | input | Inverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Non-inverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 4 | VDD | power_in | Positive power supply, 2.5V to 5.5V higher than VSS; VDD needs bypass capacitors. |
| 5 | VINB+ | input | Non-inverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Output of op amp B; a low-impedance voltage source with rail-to-rail output. |
| 8 | VOUTC | output | Output of op amp C; a low-impedance voltage source with rail-to-rail output. |
| 9 | VINC- | input | Inverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 10 | VINC+ | input | Non-inverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 11 | VSS | power_in | Negative power supply; in single-supply use it is connected to ground. |
| 12 | VIND+ | input | Non-inverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 13 | VIND- | input | Inverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 14 | VOUTD | output | Output of op amp D; a low-impedance voltage source with rail-to-rail output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -200 | 200 | µV | After calibration (Note 1) | 3 | |
| Input Offset Voltage Trim Step | VOSTRM | 37 | 200 | µV | 3 | ||
| Power Supply Rejection Ratio | PSRR | 61 | 76 | dB | 3 | ||
| Input Bias Current across temperature | IB | 1700 | 5000 | pA | TA= +125°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 65 | 81 | dB | VDD = 2.5V, VCM = -0.3 to 1.2V | 3 | |
| Common Mode Rejection Ratio | CMRR | 68 | 84 | dB | VDD = 5.5V, VCM = -0.3 to 4.2V | 3 | |
| DC Open-Loop Gain (large signal) | AOL | 88 | 114 | dB | VDD = 2.5V, VOUT = 0.3V to 2.2V | 3 | |
| DC Open-Loop Gain (large signal) | AOL | 94 | 123 | dB | VDD = 5.5V, VOUT = 0.3V to 5.2V | 3 | |
| Output Short-Circuit Current | ISC | 50 | 95 | 145 | mA | VDD = 2.5V (Note 3) | 3 |
| Output Short-Circuit Current | ISC | 50 | 100 | 150 | mA | VDD = 5.5V (Note 3) | 3 |
| Supply Voltage | VDD | 2.5 | 5.5 | V | 4 | ||
| Quiescent Current per Amplifier | IQ | 3 | 6 | 9 | mA | IO = 0 | 4 |
| POR Input Threshold, Low | VPRL | 1.15 | 1.4 | V | 4 | ||
| POR Input Threshold, High | VPRH | 1.4 | 1.65 | V | 4 | ||
| VDD High to Amplifier On Time (including calibration) | tPON | 100 | 200 | 300 | ms | G = +1 V/V, VL = VSS, VDD = 0V to 2.5V step to VOUT = 0.9 (2.5V) | 5 |
| Specified Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 6 | |
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Max. Junction Temperature | 150 | °C | 3 | ||||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -150 | 150 | mA | 3 | |||
| Thermal Resistance, 14L-SOIC | JA | 95.3 | °C/W | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | CHY = Plastic Small Outline, (2x3 SOT), 6-lead SN = Plastic Small Outline, (3.90 mm), 8-lead | 60 |
CAD (KiCad official)
- Symbol:
MCP654-E - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp654-e-etched.step/mcp654-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp654-e.step/mcp654-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (62 pp, sha256
8f8b592ea0818960, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP654-E
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-14
MCP654-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Output of op amp A; a low-impedance voltage source with rail-to-rail output. |
| 2 | VINA- | input | Inverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Non-inverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 4 | VDD | power_in | Positive power supply, 2.5V to 5.5V higher than VSS; VDD needs bypass capacitors. |
| 5 | VINB+ | input | Non-inverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Output of op amp B; a low-impedance voltage source with rail-to-rail output. |
| 8 | VOUTC | output | Output of op amp C; a low-impedance voltage source with rail-to-rail output. |
| 9 | VINC- | input | Inverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 10 | VINC+ | input | Non-inverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 11 | VSS | power_in | Negative power supply; in single-supply use it is connected to ground. |
| 12 | VIND+ | input | Non-inverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 13 | VIND- | input | Inverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 14 | VOUTD | output | Output of op amp D; a low-impedance voltage source with rail-to-rail output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -200 | | 200 | µV | After calibration (Note 1) | 3 |
| Input Offset Voltage Trim Step | VOSTRM | | 37 | 200 | µV | | 3 |
| Power Supply Rejection Ratio | PSRR | 61 | 76 | | dB | | 3 |
| Input Bias Current across temperature | IB | | 1700 | 5000 | pA | TA= +125°C | 3 |
| Common Mode Rejection Ratio | CMRR | 65 | 81 | | dB | VDD = 2.5V, VCM = -0.3 to 1.2V | 3 |
| Common Mode Rejection Ratio | CMRR | 68 | 84 | | dB | VDD = 5.5V, VCM = -0.3 to 4.2V | 3 |
| DC Open-Loop Gain (large signal) | AOL | 88 | 114 | | dB | VDD = 2.5V, VOUT = 0.3V to 2.2V | 3 |
| DC Open-Loop Gain (large signal) | AOL | 94 | 123 | | dB | VDD = 5.5V, VOUT = 0.3V to 5.2V | 3 |
| Output Short-Circuit Current | ISC | 50 | 95 | 145 | mA | VDD = 2.5V (Note 3) | 3 |
| Output Short-Circuit Current | ISC | 50 | 100 | 150 | mA | VDD = 5.5V (Note 3) | 3 |
| Supply Voltage | VDD | 2.5 | | 5.5 | V | | 4 |
| Quiescent Current per Amplifier | IQ | 3 | 6 | 9 | mA | IO = 0 | 4 |
| POR Input Threshold, Low | VPRL | 1.15 | 1.4 | | V | | 4 |
| POR Input Threshold, High | VPRH | | 1.4 | 1.65 | V | | 4 |
| VDD High to Amplifier On Time (including calibration) | tPON | 100 | 200 | 300 | ms | G = +1 V/V, VL = VSS, VDD = 0V to 2.5V step to VOUT = 0.9 (2.5V) | 5 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 6 |
| Operating Temperature Range | TA | -40 | | 125 | °C | (Note 1) | 6 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Max. Junction Temperature | | | | 150 | °C | | 3 |
| Current at Input Pins | | -2 | | 2 | mA | | 3 |
| Current at Output and Supply Pins | | -150 | | 150 | mA | | 3 |
| Thermal Resistance, 14L-SOIC | JA | | 95.3 | | °C/W | | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | CHY = Plastic Small Outline, (2x3 SOT), 6-lead SN = Plastic Small Outline, (3.90 mm), 8-lead | 60 |
## CAD (KiCad official)
- Symbol: `MCP654-E`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `mcp654-e-etched.step` / `mcp654-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp654-e.step` / `mcp654-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp654-e-datasheet.pdf) (62 pp, sha256 `8f8b592ea0818960`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp654-e-datasheet.pdf)