main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp654-e: viewers · Ray
mcp654-e-etched.glb Publish 0.1.0 · Ray
mcp654-e-etched.step mcp654-e: factory component page (tier=mfr) · Ray
mcp654-e-hero.glb mcp654-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp654-e-hero.overlay.json Publish 0.1.0 · Ray
mcp654-e.glb Publish 0.1.0 · Ray
mcp654-e.kicad_mod Publish 0.1.0 · Ray
mcp654-e.kicad_sym Publish 0.1.0 · Ray
mcp654-e.lbr Publish 0.1.0 · Ray
mcp654-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

MCP654-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-14

MCP654-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Output of op amp A; a low-impedance voltage source with rail-to-rail output.
2 VINA- input Inverting input of op amp A; a high-impedance CMOS input with low bias current.
3 VINA+ input Non-inverting input of op amp A; a high-impedance CMOS input with low bias current.
4 VDD power_in Positive power supply, 2.5V to 5.5V higher than VSS; VDD needs bypass capacitors.
5 VINB+ input Non-inverting input of op amp B; a high-impedance CMOS input with low bias current.
6 VINB- input Inverting input of op amp B; a high-impedance CMOS input with low bias current.
7 VOUTB output Output of op amp B; a low-impedance voltage source with rail-to-rail output.
8 VOUTC output Output of op amp C; a low-impedance voltage source with rail-to-rail output.
9 VINC- input Inverting input of op amp C; a high-impedance CMOS input with low bias current.
10 VINC+ input Non-inverting input of op amp C; a high-impedance CMOS input with low bias current.
11 VSS power_in Negative power supply; in single-supply use it is connected to ground.
12 VIND+ input Non-inverting input of op amp D; a high-impedance CMOS input with low bias current.
13 VIND- input Inverting input of op amp D; a high-impedance CMOS input with low bias current.
14 VOUTD output Output of op amp D; a low-impedance voltage source with rail-to-rail output.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Single Chip Microcomputer/Microcontroller
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -200 200 µV After calibration (Note 1) 3
Input Offset Voltage Trim Step VOSTRM 37 200 µV 3
Power Supply Rejection Ratio PSRR 61 76 dB 3
Input Bias Current across temperature IB 1700 5000 pA TA= +125°C 3
Common Mode Rejection Ratio CMRR 65 81 dB VDD = 2.5V, VCM = -0.3 to 1.2V 3
Common Mode Rejection Ratio CMRR 68 84 dB VDD = 5.5V, VCM = -0.3 to 4.2V 3
DC Open-Loop Gain (large signal) AOL 88 114 dB VDD = 2.5V, VOUT = 0.3V to 2.2V 3
DC Open-Loop Gain (large signal) AOL 94 123 dB VDD = 5.5V, VOUT = 0.3V to 5.2V 3
Output Short-Circuit Current ISC 50 95 145 mA VDD = 2.5V (Note 3) 3
Output Short-Circuit Current ISC 50 100 150 mA VDD = 5.5V (Note 3) 3
Supply Voltage VDD 2.5 5.5 V 4
Quiescent Current per Amplifier IQ 3 6 9 mA IO = 0 4
POR Input Threshold, Low VPRL 1.15 1.4 V 4
POR Input Threshold, High VPRH 1.4 1.65 V 4
VDD High to Amplifier On Time (including calibration) tPON 100 200 300 ms G = +1 V/V, VL = VSS, VDD = 0V to 2.5V step to VOUT = 0.9 (2.5V) 5
Specified Temperature Range TA -40 125 °C 6
Operating Temperature Range TA -40 125 °C (Note 1) 6
Storage Temperature Range -65 150 °C 3
Max. Junction Temperature 150 °C 3
Current at Input Pins -2 2 mA 3
Current at Output and Supply Pins -150 150 mA 3
Thermal Resistance, 14L-SOIC JA 95.3 °C/W 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin CHY = Plastic Small Outline, (2x3 SOT), 6-lead SN = Plastic Small Outline, (3.90 mm), 8-lead 60

CAD (KiCad official)

  • Symbol: MCP654-E
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp654-e-etched.step / mcp654-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp654-e.step / mcp654-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (62 pp, sha256 8f8b592ea0818960, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF