main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp4812-e: viewers · Ray
mcp4812-e-etched.glb Publish 0.1.0 · Ray
mcp4812-e-etched.step mcp4812-e: factory component page (tier=lcsc) · Ray
mcp4812-e-hero.glb mcp4812-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp4812-e-hero.overlay.json Publish 0.1.0 · Ray
mcp4812-e.glb Publish 0.1.0 · Ray
mcp4812-e.kicad_mod Publish 0.1.0 · Ray
mcp4812-e.kicad_sym Publish 0.1.0 · Ray
mcp4812-e.lbr Publish 0.1.0 · Ray
mcp4812-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP4812-E

Microchip Tech · Digital To Analog Converters (DACs) · SOIC-8

MCP4812-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage input, 2.7V to 5.5V relative to VSS, with a 0.1 µF ceramic bypass capacitor (plus 10 µF tantalum recommended) to ground.
2 CS input Chip Select input, active-low to enable the serial clock and data functions.
3 SCK input SPI-compatible serial clock input.
4 SDI input SPI-compatible serial data input.
5 LDAC input Latch DAC synchronization input that transfers the input registers to the output registers (VOUT) when low, updating VOUTA and VOUTB simultaneously; can be tied to VSS for update on the rising edge of CS.
6 VOUTB output DAC B analog output with its own output amplifier, full-scale range VSS to G*VREF (G = 1x or 2x) and not higher than VDD.
7 VSS power_in Analog ground pin and current return path for all circuitry on the device, to be connected to a low-impedance ground plane.
8 VOUTA output DAC A analog output with its own output amplifier, full-scale range VSS to G*VREF (G = 1x or 2x) and not higher than VDD.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VDD 2.7 5.5 V 3
Input Current IDD 415 750 µA All digital inputs grounded, all analog outputs unloaded, Code = 0x000h 3
Software Shutdown Current ISHDN_SW 3.3 6 µA 3
Resolution n 10 Bits MCP4812 3
INL Error INL -3.5 0.5 3.5 LSb MCP4812 3
DNL DNL -0.5 0.1 0.5 LSb MCP4812, Note 1 3
Offset Error VOS -1 0.02 1 % of FSR Code = 0x000h 3
Gain Error gE -2 -0.1 2 % of FSR Code = 0xFFFh, not including offset error 3
Internal Reference Voltage VREF 2.008 2.048 2.088 V VOUTA when G = 1x and Code = 0xFFFh 4
VREF Temperature Coefficient ΔVREF/°C 125 325 ppm/°C -40°C to 0°C 4
VREF Temperature Coefficient ΔVREF/°C 0.25 0.65 LSb/°C -40°C to 0°C 4
VREF Temperature Coefficient ΔVREF/°C 45 160 ppm/°C 0°C to +85°C 4
VREF Temperature Coefficient ΔVREF/°C 0.09 0.32 LSb/°C 0°C to +85°C 4
Short Circuit Current ISC 15 24 mA 4
Schmitt Trigger High-Level Input Voltage VIH 0.7 V 0.7 VDD min; all digital input pins 6
Schmitt Trigger Low-Level Input Voltage VIL 0.2 V 0.2 VDD max; all digital input pins 6
Input Leakage Current ILEAKAGE -1 1 µA LDAC = CS = SDI = SCK = VDD or VSS 6
Clock Frequency FCLK 20 MHz TA = +25°C (Note 1) 6
Clock High Time tHI 15 ns Note 1 6
Clock Low Time tLO 15 ns Note 1 6
CS Fall to First Rising CLK Edge tCSSR 40 ns Applies only when CS falls with CLK high. (Note 1) 6
Data Input Setup Time tSU 15 ns Note 1 6
Data Input Hold Time tHD 10 ns Note 1 6
SCK Rise to CS Rise Hold Time tCHS 15 ns Note 1 6
CS High Time tCSH 15 ns Note 1 7
LDAC Pulse Width tLD 100 ns Note 1 7
LDAC Setup Time tLS 40 ns Note 1 7
SCK Idle Time before CS Fall tIDLE 40 ns Note 1 7
Specified Temperature Range TA -40 125 °C 7
Operating Temperature Range TA -40 125 °C Note 1 7
Storage Temperature Range TA -65 150 °C 7
Supply Voltage VDD 6.5 V 3
All inputs and outputs voltage -0.3 0.3 V VSS, 0.3V to VDD + 0.3V (min relative to VSS, max relative to VDD) 3
Current at Input Pins -2 2 mA 3
Current at Supply Pins -50 50 mA 3
Current at Output Pins -25 25 mA 3
Ambient temp. with power applied -55 125 °C 3
Maximum Junction Temperature TJ 150 °C 3
Thermal Resistance, 8L-SOIC θJA 150 °C/W 7
Power-on Reset Threshold VPOR 2 V 3
Offset Error Temperature Coefficient ΔVOS/°C 0.16 ppm/°C -45°C to +25°C 3
Offset Error Temperature Coefficient ΔVOS/°C -0.44 ppm/°C +25°C to +85°C 3
Gain Error Temperature Coefficient ΔG/°C -3 ppm/°C 3
Settling Time tSETTLING 4.5 µs Within 1/2 LSb of final value from 1/4 to 3/4 full-scale range 4
Slew Rate SR 0.55 V/µs 4
Input Current (extended temp) IDD 440 µA Typical at +125°C; digital inputs grounded, outputs unloaded, Code = 0x000h 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin P = 8-Lead Plastic Dual In-Line (PDIP) SN = 8-Lead Plastic Small Outline - Narrow, 150 mil 47

CAD (KiCad official)

  • Symbol: MCP4812-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp4812-e-etched.step / mcp4812-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4812-e.step / mcp4812-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (50 pp, sha256 1f0b231636222ea5, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF