3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP4812-E
Microchip Tech · Digital To Analog Converters (DACs) · SOIC-8
MCP4812-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage input, 2.7V to 5.5V relative to VSS, with a 0.1 µF ceramic bypass capacitor (plus 10 µF tantalum recommended) to ground. |
| 2 | CS | input | Chip Select input, active-low to enable the serial clock and data functions. |
| 3 | SCK | input | SPI-compatible serial clock input. |
| 4 | SDI | input | SPI-compatible serial data input. |
| 5 | LDAC | input | Latch DAC synchronization input that transfers the input registers to the output registers (VOUT) when low, updating VOUTA and VOUTB simultaneously; can be tied to VSS for update on the rising edge of CS. |
| 6 | VOUTB | output | DAC B analog output with its own output amplifier, full-scale range VSS to G*VREF (G = 1x or 2x) and not higher than VDD. |
| 7 | VSS | power_in | Analog ground pin and current return path for all circuitry on the device, to be connected to a low-impedance ground plane. |
| 8 | VOUTA | output | DAC A analog output with its own output amplifier, full-scale range VSS to G*VREF (G = 1x or 2x) and not higher than VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VDD | 2.7 | 5.5 | V | 3 | ||
| Input Current | IDD | 415 | 750 | µA | All digital inputs grounded, all analog outputs unloaded, Code = 0x000h | 3 | |
| Software Shutdown Current | ISHDN_SW | 3.3 | 6 | µA | 3 | ||
| Resolution | n | 10 | Bits | MCP4812 | 3 | ||
| INL Error | INL | -3.5 | 0.5 | 3.5 | LSb | MCP4812 | 3 |
| DNL | DNL | -0.5 | 0.1 | 0.5 | LSb | MCP4812, Note 1 | 3 |
| Offset Error | VOS | -1 | 0.02 | 1 | % of FSR | Code = 0x000h | 3 |
| Gain Error | gE | -2 | -0.1 | 2 | % of FSR | Code = 0xFFFh, not including offset error | 3 |
| Internal Reference Voltage | VREF | 2.008 | 2.048 | 2.088 | V | VOUTA when G = 1x and Code = 0xFFFh | 4 |
| VREF Temperature Coefficient | ΔVREF/°C | 125 | 325 | ppm/°C | -40°C to 0°C | 4 | |
| VREF Temperature Coefficient | ΔVREF/°C | 0.25 | 0.65 | LSb/°C | -40°C to 0°C | 4 | |
| VREF Temperature Coefficient | ΔVREF/°C | 45 | 160 | ppm/°C | 0°C to +85°C | 4 | |
| VREF Temperature Coefficient | ΔVREF/°C | 0.09 | 0.32 | LSb/°C | 0°C to +85°C | 4 | |
| Short Circuit Current | ISC | 15 | 24 | mA | 4 | ||
| Schmitt Trigger High-Level Input Voltage | VIH | 0.7 | V | 0.7 VDD min; all digital input pins | 6 | ||
| Schmitt Trigger Low-Level Input Voltage | VIL | 0.2 | V | 0.2 VDD max; all digital input pins | 6 | ||
| Input Leakage Current | ILEAKAGE | -1 | 1 | µA | LDAC = CS = SDI = SCK = VDD or VSS | 6 | |
| Clock Frequency | FCLK | 20 | MHz | TA = +25°C (Note 1) | 6 | ||
| Clock High Time | tHI | 15 | ns | Note 1 | 6 | ||
| Clock Low Time | tLO | 15 | ns | Note 1 | 6 | ||
| CS Fall to First Rising CLK Edge | tCSSR | 40 | ns | Applies only when CS falls with CLK high. (Note 1) | 6 | ||
| Data Input Setup Time | tSU | 15 | ns | Note 1 | 6 | ||
| Data Input Hold Time | tHD | 10 | ns | Note 1 | 6 | ||
| SCK Rise to CS Rise Hold Time | tCHS | 15 | ns | Note 1 | 6 | ||
| CS High Time | tCSH | 15 | ns | Note 1 | 7 | ||
| LDAC Pulse Width | tLD | 100 | ns | Note 1 | 7 | ||
| LDAC Setup Time | tLS | 40 | ns | Note 1 | 7 | ||
| SCK Idle Time before CS Fall | tIDLE | 40 | ns | Note 1 | 7 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 7 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 7 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 7 | ||
| Supply Voltage | VDD | 6.5 | V | 3 | |||
| All inputs and outputs voltage | -0.3 | 0.3 | V | VSS, 0.3V to VDD + 0.3V (min relative to VSS, max relative to VDD) | 3 | ||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Supply Pins | -50 | 50 | mA | 3 | |||
| Current at Output Pins | -25 | 25 | mA | 3 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance, 8L-SOIC | θJA | 150 | °C/W | 7 | |||
| Power-on Reset Threshold | VPOR | 2 | V | 3 | |||
| Offset Error Temperature Coefficient | ΔVOS/°C | 0.16 | ppm/°C | -45°C to +25°C | 3 | ||
| Offset Error Temperature Coefficient | ΔVOS/°C | -0.44 | ppm/°C | +25°C to +85°C | 3 | ||
| Gain Error Temperature Coefficient | ΔG/°C | -3 | ppm/°C | 3 | |||
| Settling Time | tSETTLING | 4.5 | µs | Within 1/2 LSb of final value from 1/4 to 3/4 full-scale range | 4 | ||
| Slew Rate | SR | 0.55 | V/µs | 4 | |||
| Input Current (extended temp) | IDD | 440 | µA | Typical at +125°C; digital inputs grounded, outputs unloaded, Code = 0x000h | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | P = 8-Lead Plastic Dual In-Line (PDIP) SN = 8-Lead Plastic Small Outline - Narrow, 150 mil | 47 |
CAD (KiCad official)
- Symbol:
MCP4812-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp4812-e-etched.step/mcp4812-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4812-e.step/mcp4812-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
1f0b231636222ea5, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).