main
Ray Publish 0.1.0 e5417e9

MCP47FEB08-20E

Microchip Tech · Digital To Analog Converters (DAC) · TSSOP-20

MCP47FEB08-20E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LAT1 input Schmitt-trigger DAC register latch pin that transfers the volatile DAC1/DAC3/DAC5/DAC7 registers (wiper and configuration bits) to VOUT1, VOUT3, VOUT5, VOUT7 when low.
2 VDD power_in Positive supply voltage input, 2.7V to 5.5V for full specifications (1.8V to 2.7V reduced), with about 0.1 µF ceramic bypass to ground recommended.
3 A0 input I2C slave address bit 0 pin (Schmitt-trigger input).
4 VREF0 bidirectional Analog voltage reference for even channels 0-6; an input when VREF pin is the reference, an output (minimal drive) when the internal band gap is selected, disconnected when VDD is the reference.
5 VOUT0 output Buffered analog voltage output of channel 0.
6 VOUT2 output Buffered analog voltage output of channel 2.
7 VOUT4 output Buffered analog voltage output of channel 4.
8 VOUT6 output Buffered analog voltage output of channel 6.
9 VSS power_in Ground reference for all circuitry on the device, to be connected to a low-impedance ground plane.
10 NC unconnected Not internally connected.
11 NC unconnected Not internally connected.
12 VOUT7 output Buffered analog voltage output of channel 7.
13 VOUT5 output Buffered analog voltage output of channel 5.
14 VOUT3 output Buffered analog voltage output of channel 3.
15 VOUT1 output Buffered analog voltage output of channel 1.
16 VREF1 bidirectional Analog voltage reference for odd channels 1-7; an input when VREF pin is the reference, an output (minimal drive) when the internal band gap is selected, disconnected when VDD is the reference.
17 A1 input I2C slave address bit 1 pin.
18 SCL input I2C serial clock input (Schmitt trigger, open-drain) requiring an external pull-up to VDD; device acts only as slave.
19 SDA bidirectional I2C serial data pin (Schmitt trigger) requiring an external pull-up to VDD.
20 LAT0/HVC input Latch 0 pin transferring volatile DAC0/DAC2/DAC4/DAC6 registers to VOUT0, VOUT2, VOUT4, VOUT6, and high-voltage command pin that allows user configuration bits to be written when above VIHH.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-20
Category Data Acquisition
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (full specs) VDD 2.7 5.5 V 6
Supply Voltage (reduced analog specs) VDD 1.8 2.7 V Serial interface operational; DAC operation with reduced analog specifications 6
Operating Temperature TA -40 125 °C Extended 24
VDD voltage to ensure POR VPOR/BOR 1.7 V RAM retention voltage (VRAM) < VPOR 6
High-Voltage Command Voltage Range (HVC) VHV 12.5 V HVC pin at one of three input levels 6
High-Voltage Input Entry Voltage VIHHEN 9 V Threshold for entry into WiperLock Technology 6
Supply Current, active (Octal) IDD 1.8 mA Serial interface active, VOUT unloaded, VDD = 5.5V, VRnB:VRnA = 10, DAC midscale, FSCL = 3.4 MHz 7
Supply Current, inactive (Octal) IDD 1.6 µA Serial interface inactive, SCL = SDA = VSS, VOUT unloaded, VRnB:VRnA = All Modes 7
Supply Current, EE write (Octal) IDD 3 mA VREF = VDD = 5.5V, write all 7FFh to nonvolatile DAC0, VOUT unloaded 7
Supply Current, HVC (Octal) IDD 1100 1300 µA HVC = 12.5V, VREF = VDD = 5.5V, LAT/HVC = VIHH, DAC midscale, VOUT unloaded 7
Power-Down Current IDDP 0.68 3.8 µA PDnB:PDnA = 01, VOUT not connected 7
Resistor Ladder Resistance RL 100 140 180 kΩ VRnB:VRnA = 10, VREF = VDD 8
Nominal VOUT Match /VOUT - VOUTMEAN//VOUTMEAN 0.5 1 % 2.7V ≤ VDD ≤ 5.5V 8
Nominal VOUT Match (1.8V) /VOUT - VOUTMEAN//VOUTMEAN 1.2 % 1.8V 8
VOUT Temperature Coefficient ΔVOUT/ΔT 15 ppm/°C Code = Midscale (7Fh) 8
Zero-Scale Error (8-bit) EZS 0.75 LSb VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load 9
Full-Scale Error (8-bit) EFS 4.5 LSb VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load 9
Offset Error EOS -15 1.5 15 mV VRnB:VRnA = 00, Gx = 0, no load 9
Offset Voltage Temperature Coefficient VOSTC 10 µV/°C 9
Gain Error (8-bit) EG -1 0.1 1 % of FSR Code = 250, no load, VRnB:VRnA = 00, Gx = 0 10
Gain Error Drift ΔG/°C -3 ppm/°C 10
Total Unadjusted Error (8-bit) ET -2.5 0.5 LSb VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load 10
Integral Nonlinearity (8-bit) INL -0.5 0.1 0.5 LSb VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load 11
Differential Nonlinearity (8-bit) DNL -0.25 0.0125 0.25 LSb VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load 12
Short-Circuit Current (to VSS) ISC 3 9 22 mA Short to VSS, DAC code = Full Scale 13
Short-Circuit Current (to VDD) ISC 3 9 22 mA Short to VDD, DAC code = 000h 13
Band Gap Voltage VBG 1.18 1.22 1.26 V 13
Band Gap Operating Range (VREF stable) VDD 2 5.5 V VREF pin voltage stable 13
Band Gap Operating Range (VOUT linear) VDD 2.2 5.5 V VOUT output linear 13
Band Gap Voltage Temperature Coefficient VBGTC 15 ppm/°C 13
-3 dB Bandwidth (Gx = 0) BW 86.5 kHz VREF = 2.048V ± 0.1V, VRnB:VRnA = 10, Gx = 0 13
Minimum Output Voltage VOUT(MIN) 0.01 V 1.8V ≤ VDD ≤ 5.5V, Output Amplifier's minimum drive 13
Phase Margin PM 58 °C CL = 400 pF, RL = ∞ 13
Slew Rate SR 0.44 V/µs RL = 5 kΩ 13
VREF Input Capacitance CREF 1 pF VRnB:VRnA = 10 (Unbuffered mode) 13
Total Harmonic Distortion THD -64 dB VREF = 2.048V ± 0.1V, VRnB:VRnA = 10, Gx = 0, Frequency = 1 kHz 13
SDA Output Low Voltage VOL 0.4 V VDD ≥ 2.0V, IOL = 3 mA 14
LAT/HVC Input Leakage Current IIL -1 1 µA VIN = VDD and VIN = VSS 14
SDA/SCL Input Leakage ILI -1 1 µA SCL = SDA = VSS or SCL = SDA = VDD 14
Digital Pin Capacitance CPIN 10 pF fC = 3.4 MHz 14
EEPROM Programming Write Cycle Time tWC 11 16 ms VDD = +1.8V to 5.5V 15
EEPROM Data Retention DREE 200 Years At +25°C 15
Power Supply Sensitivity (8-bit) PSS 0.002 0.005 %/% Code = 7Fh 15
VOUT Settling Time tS 7.8 µs 12-bit Code = 400h to C00h; C00h to 400h 17
LATx Pin Pulse Width tLAT 20 ns 17
Power-on Reset Delay tPORD 60 µs 18
Brown-out Reset Delay tBORD 45 µs 18
Power-Down DAC Output Disable Time Delay TPDE 10.5 µs PDnB:PDnA = 00 to 11, 10 or 01, VOUT not connected 18
Power-Down DAC Output Enable Time Delay TPDD 1 µs PDnB:PDnA = 11, 10 or 01 to 00, VOUT not connected 18
I2C Clock Frequency, Fast mode FSCL 0 400 kHz Cb = 400 pF, 2.7V - 5.5V 20
I2C Clock Frequency, High-Speed 3.4 FSCL 0 3.4 MHz Cb = 100 pF, 4.5V - 5.5V 20
Thermal Resistance, 20L-TSSOP θJA 90 °C/W 24
Voltage on VDD with Respect to VSS VDD -0.6 6.5 V 5
Input Clamp Current IIK -20 20 mA VI < 0, VI > VDD, VI > VPP on HV Pins 5
Maximum Current Sourced/Sunk by VOUT Pin 20 mA 5
Total Power Dissipation 400 mW 5
Storage Temperature -65 150 °C 5
Ambient Temperature with Power Applied -55 125 °C 5
Maximum Junction Temperature TJ 150 °C 5

CAD (KiCad official)

  • Symbol: MCP47FEB08-20E
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: mcp47feb08-20e-etched.step / mcp47feb08-20e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp47feb08-20e.step / mcp47feb08-20e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (124 pp, sha256 94635c2299863478, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF