Generated by kicad-footprint-generator · KiCad file format 20260206
MCP47FEB08-20E
Microchip Tech · Digital To Analog Converters (DAC) · TSSOP-20
MCP47FEB08-20E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LAT1 | input | Schmitt-trigger DAC register latch pin that transfers the volatile DAC1/DAC3/DAC5/DAC7 registers (wiper and configuration bits) to VOUT1, VOUT3, VOUT5, VOUT7 when low. |
| 2 | VDD | power_in | Positive supply voltage input, 2.7V to 5.5V for full specifications (1.8V to 2.7V reduced), with about 0.1 µF ceramic bypass to ground recommended. |
| 3 | A0 | input | I2C slave address bit 0 pin (Schmitt-trigger input). |
| 4 | VREF0 | bidirectional | Analog voltage reference for even channels 0-6; an input when VREF pin is the reference, an output (minimal drive) when the internal band gap is selected, disconnected when VDD is the reference. |
| 5 | VOUT0 | output | Buffered analog voltage output of channel 0. |
| 6 | VOUT2 | output | Buffered analog voltage output of channel 2. |
| 7 | VOUT4 | output | Buffered analog voltage output of channel 4. |
| 8 | VOUT6 | output | Buffered analog voltage output of channel 6. |
| 9 | VSS | power_in | Ground reference for all circuitry on the device, to be connected to a low-impedance ground plane. |
| 10 | NC | unconnected | Not internally connected. |
| 11 | NC | unconnected | Not internally connected. |
| 12 | VOUT7 | output | Buffered analog voltage output of channel 7. |
| 13 | VOUT5 | output | Buffered analog voltage output of channel 5. |
| 14 | VOUT3 | output | Buffered analog voltage output of channel 3. |
| 15 | VOUT1 | output | Buffered analog voltage output of channel 1. |
| 16 | VREF1 | bidirectional | Analog voltage reference for odd channels 1-7; an input when VREF pin is the reference, an output (minimal drive) when the internal band gap is selected, disconnected when VDD is the reference. |
| 17 | A1 | input | I2C slave address bit 1 pin. |
| 18 | SCL | input | I2C serial clock input (Schmitt trigger, open-drain) requiring an external pull-up to VDD; device acts only as slave. |
| 19 | SDA | bidirectional | I2C serial data pin (Schmitt trigger) requiring an external pull-up to VDD. |
| 20 | LAT0/HVC | input | Latch 0 pin transferring volatile DAC0/DAC2/DAC4/DAC6 registers to VOUT0, VOUT2, VOUT4, VOUT6, and high-voltage command pin that allows user configuration bits to be written when above VIHH. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | Data Acquisition |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (full specs) | VDD | 2.7 | 5.5 | V | 6 | ||
| Supply Voltage (reduced analog specs) | VDD | 1.8 | 2.7 | V | Serial interface operational; DAC operation with reduced analog specifications | 6 | |
| Operating Temperature | TA | -40 | 125 | °C | Extended | 24 | |
| VDD voltage to ensure POR | VPOR/BOR | 1.7 | V | RAM retention voltage (VRAM) < VPOR | 6 | ||
| High-Voltage Command Voltage Range (HVC) | VHV | 12.5 | V | HVC pin at one of three input levels | 6 | ||
| High-Voltage Input Entry Voltage | VIHHEN | 9 | V | Threshold for entry into WiperLock Technology | 6 | ||
| Supply Current, active (Octal) | IDD | 1.8 | mA | Serial interface active, VOUT unloaded, VDD = 5.5V, VRnB:VRnA = 10, DAC midscale, FSCL = 3.4 MHz | 7 | ||
| Supply Current, inactive (Octal) | IDD | 1.6 | µA | Serial interface inactive, SCL = SDA = VSS, VOUT unloaded, VRnB:VRnA = All Modes | 7 | ||
| Supply Current, EE write (Octal) | IDD | 3 | mA | VREF = VDD = 5.5V, write all 7FFh to nonvolatile DAC0, VOUT unloaded | 7 | ||
| Supply Current, HVC (Octal) | IDD | 1100 | 1300 | µA | HVC = 12.5V, VREF = VDD = 5.5V, LAT/HVC = VIHH, DAC midscale, VOUT unloaded | 7 | |
| Power-Down Current | IDDP | 0.68 | 3.8 | µA | PDnB:PDnA = 01, VOUT not connected | 7 | |
| Resistor Ladder Resistance | RL | 100 | 140 | 180 | kΩ | VRnB:VRnA = 10, VREF = VDD | 8 |
| Nominal VOUT Match | /VOUT - VOUTMEAN//VOUTMEAN | 0.5 | 1 | % | 2.7V ≤ VDD ≤ 5.5V | 8 | |
| Nominal VOUT Match (1.8V) | /VOUT - VOUTMEAN//VOUTMEAN | 1.2 | % | 1.8V | 8 | ||
| VOUT Temperature Coefficient | ΔVOUT/ΔT | 15 | ppm/°C | Code = Midscale (7Fh) | 8 | ||
| Zero-Scale Error (8-bit) | EZS | 0.75 | LSb | VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load | 9 | ||
| Full-Scale Error (8-bit) | EFS | 4.5 | LSb | VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load | 9 | ||
| Offset Error | EOS | -15 | 1.5 | 15 | mV | VRnB:VRnA = 00, Gx = 0, no load | 9 |
| Offset Voltage Temperature Coefficient | VOSTC | 10 | µV/°C | 9 | |||
| Gain Error (8-bit) | EG | -1 | 0.1 | 1 | % of FSR | Code = 250, no load, VRnB:VRnA = 00, Gx = 0 | 10 |
| Gain Error Drift | ΔG/°C | -3 | ppm/°C | 10 | |||
| Total Unadjusted Error (8-bit) | ET | -2.5 | 0.5 | LSb | VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load | 10 | |
| Integral Nonlinearity (8-bit) | INL | -0.5 | 0.1 | 0.5 | LSb | VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load | 11 |
| Differential Nonlinearity (8-bit) | DNL | -0.25 | 0.0125 | 0.25 | LSb | VRnB:VRnA = 10, Gx = 0, VREF = VDD, no load | 12 |
| Short-Circuit Current (to VSS) | ISC | 3 | 9 | 22 | mA | Short to VSS, DAC code = Full Scale | 13 |
| Short-Circuit Current (to VDD) | ISC | 3 | 9 | 22 | mA | Short to VDD, DAC code = 000h | 13 |
| Band Gap Voltage | VBG | 1.18 | 1.22 | 1.26 | V | 13 | |
| Band Gap Operating Range (VREF stable) | VDD | 2 | 5.5 | V | VREF pin voltage stable | 13 | |
| Band Gap Operating Range (VOUT linear) | VDD | 2.2 | 5.5 | V | VOUT output linear | 13 | |
| Band Gap Voltage Temperature Coefficient | VBGTC | 15 | ppm/°C | 13 | |||
| -3 dB Bandwidth (Gx = 0) | BW | 86.5 | kHz | VREF = 2.048V ± 0.1V, VRnB:VRnA = 10, Gx = 0 | 13 | ||
| Minimum Output Voltage | VOUT(MIN) | 0.01 | V | 1.8V ≤ VDD ≤ 5.5V, Output Amplifier's minimum drive | 13 | ||
| Phase Margin | PM | 58 | °C | CL = 400 pF, RL = ∞ | 13 | ||
| Slew Rate | SR | 0.44 | V/µs | RL = 5 kΩ | 13 | ||
| VREF Input Capacitance | CREF | 1 | pF | VRnB:VRnA = 10 (Unbuffered mode) | 13 | ||
| Total Harmonic Distortion | THD | -64 | dB | VREF = 2.048V ± 0.1V, VRnB:VRnA = 10, Gx = 0, Frequency = 1 kHz | 13 | ||
| SDA Output Low Voltage | VOL | 0.4 | V | VDD ≥ 2.0V, IOL = 3 mA | 14 | ||
| LAT/HVC Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD and VIN = VSS | 14 | |
| SDA/SCL Input Leakage | ILI | -1 | 1 | µA | SCL = SDA = VSS or SCL = SDA = VDD | 14 | |
| Digital Pin Capacitance | CPIN | 10 | pF | fC = 3.4 MHz | 14 | ||
| EEPROM Programming Write Cycle Time | tWC | 11 | 16 | ms | VDD = +1.8V to 5.5V | 15 | |
| EEPROM Data Retention | DREE | 200 | Years | At +25°C | 15 | ||
| Power Supply Sensitivity (8-bit) | PSS | 0.002 | 0.005 | %/% | Code = 7Fh | 15 | |
| VOUT Settling Time | tS | 7.8 | µs | 12-bit Code = 400h to C00h; C00h to 400h | 17 | ||
| LATx Pin Pulse Width | tLAT | 20 | ns | 17 | |||
| Power-on Reset Delay | tPORD | 60 | µs | 18 | |||
| Brown-out Reset Delay | tBORD | 45 | µs | 18 | |||
| Power-Down DAC Output Disable Time Delay | TPDE | 10.5 | µs | PDnB:PDnA = 00 to 11, 10 or 01, VOUT not connected | 18 | ||
| Power-Down DAC Output Enable Time Delay | TPDD | 1 | µs | PDnB:PDnA = 11, 10 or 01 to 00, VOUT not connected | 18 | ||
| I2C Clock Frequency, Fast mode | FSCL | 0 | 400 | kHz | Cb = 400 pF, 2.7V - 5.5V | 20 | |
| I2C Clock Frequency, High-Speed 3.4 | FSCL | 0 | 3.4 | MHz | Cb = 100 pF, 4.5V - 5.5V | 20 | |
| Thermal Resistance, 20L-TSSOP | θJA | 90 | °C/W | 24 | |||
| Voltage on VDD with Respect to VSS | VDD | -0.6 | 6.5 | V | 5 | ||
| Input Clamp Current | IIK | -20 | 20 | mA | VI < 0, VI > VDD, VI > VPP on HV Pins | 5 | |
| Maximum Current Sourced/Sunk by VOUT Pin | 20 | mA | 5 | ||||
| Total Power Dissipation | 400 | mW | 5 | ||||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Ambient Temperature with Power Applied | -55 | 125 | °C | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 5 |
CAD (KiCad official)
- Symbol:
MCP47FEB08-20E - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mcp47feb08-20e-etched.step/mcp47feb08-20e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp47feb08-20e.step/mcp47feb08-20e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (124 pp, sha256
94635c2299863478, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).